Spark Reis Elektriese Kitaar deur Maxwell Brazo

Die ontwerp Spark Reis Elektriese Kitaar deur Maxwell Brazo is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2022 A' Design Award in Brons in die Musiekinstrumente Ontwerp-kompetisiekategorie.

BronsMusiekinstrument· 2022

Spark Reis Elektriese Kitaar

deur Maxwell Brazo

Kliënt: Maxwell Brazo

Wenner van die A' Design Award in Brons in die Musiekinstrument-kategorie

39,941

Geverifieerde Toekenningswenner

Verifieer Toekenningsstatus vir #126635

Besoek Webwerf Bekyk by A' Design Award Persverklaring Toekenningskenteken

Kleure

Die Ontwerp

Oor Spark Reis Elektriese Kitaar

Spark is 'n reis elektriese kitaar wat ontwerp is vir draagbaarheid en vir vervaardiging tuis. Die lyf, nek, en klawerbord word gedruk deur middel van gesmelte filamentvervaardiging met behulp van herwinne houtvesel en aramied-saamgestelde materiale in plaas van hardehout. Die elektriese en meganiese komponente is wyd beskikbaar, en samestelling maak gebruik van 'n soldeerlose bedradingstelsel. Spark word afgewerk deur tradisionele metodes, insluitend skuur, fret-plasing, en 'n nitrosellulose-lakbedekking. 'n Kopstuklose vaste brug hou die volle skaallengte binne 'n kompakte vorm.

Die Erkenning

Oor die A' Design Award in Brons

Spark Reis Elektriese Kitaar is 'n wenner van die A' Design Award in Brons, 'n hoogs prestigieuse erkenning wat toegeken word aan uitstaande ontwerpe wat gekenmerk word deur kreatiwiteit, vindingrykheid en skerpsinnigheid. Wenners in Brons is ruimskoots vaardige en opvallend kreatiewe artefakte wat die groot ervaring, verbeelding en vindingrykheid van hul ontwerpers bevestig. Daar word verwag dat Spark Reis Elektriese Kitaar 'n hoog aangeskrewe, bewonderde en gekoesterde voorwerp is wat merkwaardig professioneel en innoverend is. Hierdie ontwerp wat die A' Design Award in Brons gewen het, inkorporeer die beste praktyke in kuns, wetenskap, ontwerp en tegnologie en is uitstekend vanweë sy aandag aan detail. Spark Reis Elektriese Kitaar bevredig behoeftes pragtig, raak aan begeertes, bekoor gevoelens en spreek die nuuskierigheid aan.

Agter die Ontwerp

Persstel

Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.

Unieke Eienskappe: Focuses on sustainability, accessibility, and adaptability through use of computer aided design software and at-home manufacturing. Fully printed guitar body, neck, and fret board using alternatives to hardwoods. Recycled plastic and wood fiber composites used are able to be fully finished and assembled using simple and standard methods. All electrical and mechanical components are domestically sourced and widely available.
Afmetings & Verpakking: Product Dimensions: Width 133.35mm (5.25in) x Depth 57.15mm (2.25in) x Height 768.35mm (30.25in), Scale Length: 25.5in, Fret-Board Radius: 9.5 - Modern C Neck Profile - Single Coil & Humbucker Passive Pickups
- Body/Neck/Fretboard (Timber-fill/Nylon AF80 Aramid)
- Headless Fixed Bridge and Double-Ball End Combo Headpiece
- Angled Switch Tele Titanium Control Plate
- Neck Plate (Bolt-On Style)
- Electrosocket Jack Mount
- Low Profile Truss Rod
- Stainless-Steel Hardware and Threaded Inserts
- Solderless Wiring System
Etikette: Guitar, Electric, Travel, 3D Printed, Sustainablity, Instrument, Music, Design
Produksietegnologie: Realized through Computer-Aided Design and Fused Filament Fabrication technologies. Domestically sourced electrical and mechanical components. Finished using traditional methods (sanding, seating frets, binding, nitrocellulose lacquer finish, etc.).
Ontwerpuitdaging: Bio-composite filaments used, while recyclable and or compostable, do not provide adequate structural support for full-scale stringed instruments under tension. Complications with recycled wood-fiber composite filaments required research and testing of additional materials with more effective mechanical properties. Key attributes considered were creep resistance (resistance against deformation under long-term load), tensile strength, elongation at break, density, and ease of printing.
Navorsing: Initial research into fundamental basics and history of electric guitar construction was crucial to ensure a playable end product. Standardized dimensions of classic high-end models helped to provide a familiar aesthetic and a framework to work within, and use of widely available and popular components to inform the overall design. Influenced by concepts such as compact modularity, right to repair, and the future of at-home manufacturing.
Inspirasie: An exploration to replicate traditional luthier processes through new-age methods of small scale manufacturing and the pursuit of material alternatives for guitar-making. Informed by the idea that making a guitar should be more accessible and experiential; the vision for a transformative guitar able to be printed and assembled at home, inspired by vintage Fender, Steinberger, La Baye 2x4, and lap steel guitars.
Projekduur: The continuation of thesis work while at Rochester Institute of Technology, this project has spent some time in design and development. Prototyping done in 2021 and final working model and process book to be completed in 2022. Based out of Litchfield, Connecticut.
Bedryfsvloei: Printable and playable, an innovative solution to cost-effectively produce and assemble your own guitar using recyclable materials, encompassed within a compact full-scale travel silhouette.
Beeldkrediete: Image #1: Creator Maxwell Brazo, 2022.
Image #2: Creator Maxwell Brazo, 2022.
Image #3: Creator Maxwell Brazo, 2022.
Image #4: Photographer Maxwell Brazo, 2022.
Image #5: Creator Maxwell Brazo, 2022.