Die ontwerp Bend Koffietafel deur Jan Goderis is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2023 A' Design Award in Brons in die Meubelontwerp-kompetisiekategorie.
BronsMeubels· 2023
Bend Koffietafel
deur Jan Goderis
Wenner van die A' Design Award in Brons in die Meubels-kategorie
Geverifieerde Toekenningswenner
Verifieer Toekenningsstatus vir #148865Die Ontwerp
Oor Bend Koffietafel
Die tafel is gemaak van twee gebuigde aluminiumplate wat inmekaar pas. Wanneer dit saamgevoeg word, strek die plate tot by die bene. Dit gee 'n sekere deursigtigheid en ligtheid aan die ontwerp en vertikale berging word geskep vir tydskrifte, koerante en plaid. Tussen die twee boonste plate is daar ook die moontlikheid van berging aan beide kante van die tafel.
Die Erkenning
Oor die A' Design Award in Brons
Bend Koffietafel is 'n wenner van die A' Design Award in Brons, 'n hoogs prestigieuse erkenning wat toegeken word aan uitstaande ontwerpe wat gekenmerk word deur kreatiwiteit, vindingrykheid en skerpsinnigheid. Wenners in Brons is ruimskoots vaardige en opvallend kreatiewe artefakte wat die groot ervaring, verbeelding en vindingrykheid van hul ontwerpers bevestig. Daar word verwag dat Bend Koffietafel 'n hoog aangeskrewe, bewonderde en gekoesterde voorwerp is wat merkwaardig professioneel en innoverend is. Hierdie ontwerp wat die A' Design Award in Brons gewen het, inkorporeer die beste praktyke in kuns, wetenskap, ontwerp en tegnologie en is uitstekend vanweë sy aandag aan detail. Bend Koffietafel bevredig behoeftes pragtig, raak aan begeertes, bekoor gevoelens en spreek die nuuskierigheid aan.
Agter die Ontwerp
Persstel
Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.
- Unieke Eienskappe
- The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
- Afmetings & Verpakking
- Dimensions: 125 x 55 x 28 cm
- Etikette
- coffee table, folded table, ecological design, functional design, minimal design
- Produksietegnologie
- Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
- Ontwerpuitdaging
- The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
- Navorsing
- The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
- Inspirasie
- The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
- Projekduur
- The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
- Bedryfsvloei
- The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
- Patente
- e-depot: 000595853
- Spanlede
- Jan Goderis
- Beeldkrediete
- #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022
Geborg
Verken Verder as Designers.org
Ontdek produkte, dienste en geleenthede van ons advertensiavennote.
Meer om te Ontdek
Verwante Ontwerpe
Ontdek meer bekroonde ontwerpe uit dieselfde kategorie, gekies op meriete.
