Continuous Plate House 2.0 Koshuisopknapping deur Ryumei Fujik and Yukiko Sato

Die ontwerp Continuous Plate House 2.0 Koshuisopknapping deur Ryumei Fujik and Yukiko Sato is 'n hoogs gewaardeerde wenner van die baie prestigieuese 2020 A' Design Award in Brons in die Binneruimte- en Uitstallingsontwerp-kompetisiekategorie.

BronsInterieur· 2020

Continuous Plate House 2.0 Koshuisopknapping

deur Ryumei Fujik and Yukiko Sato

Kliënt: F.a.d.s

Wenner van die A' Design Award in Brons in die Interieur-kategorie

18,545

Geverifieerde Toekenningswenner

Verifieer Toekenningsstatus vir #92851

Besoek Webwerf Bekyk by A' Design Award Persverklaring Toekenningskenteken

Kleure

Die Ontwerp

Oor Continuous Plate House 2.0 Koshuisopknapping

Hierdie huis is hoofsaaklik op die eerste verdieping opgeknap omdat dit 18 jaar voltooi is. Die opknapping het vereis dat die bestaande kombuisarea, bestaande uit die kombuis, ontbythoekie en kosberging, verander word na 'n spasie wat vir verskeie doeleindes gebruik kan word. Om op hierdie vraag te reageer, is die kosberging en gange uitgeskakel, wat die hele spasie een kamer wyd gemaak het, en die wasbak is verander van 'n muurgemonteerde tipe na 'n eilandtipe, wat dit 'n meer spasie gemaak het wat op die kombuiseenheid gesentreer is. . Dit is hergebore as 'n rustige en knus kamer omdat dit met 'n houtafwerking bedek is.

Die Erkenning

Oor die A' Design Award in Brons

Continuous Plate House 2.0 Koshuisopknapping is 'n wenner van die A' Design Award in Brons, 'n hoogs prestigieuse erkenning wat toegeken word aan uitstaande ontwerpe wat gekenmerk word deur kreatiwiteit, vindingrykheid en skerpsinnigheid. Wenners in Brons is ruimskoots vaardige en opvallend kreatiewe artefakte wat die groot ervaring, verbeelding en vindingrykheid van hul ontwerpers bevestig. Daar word verwag dat Continuous Plate House 2.0 Koshuisopknapping 'n hoog aangeskrewe, bewonderde en gekoesterde voorwerp is wat merkwaardig professioneel en innoverend is. Hierdie ontwerp wat die A' Design Award in Brons gewen het, inkorporeer die beste praktyke in kuns, wetenskap, ontwerp en tegnologie en is uitstekend vanweë sy aandag aan detail. Continuous Plate House 2.0 Koshuisopknapping bevredig behoeftes pragtig, raak aan begeertes, bekoor gevoelens en spreek die nuuskierigheid aan.

Agter die Ontwerp

Persstel

Krediete, spanlede en tegniese besonderhede verskaf deur die ontwerper.

Unieke Eienskappe: The renovation required that the existing kitchen area, consisting of the kitchen, breakfast corner, and food storage, be changed to a space that can be used for various purposes, not just at breakfast. In order to respond to this demand, the food storage and corridors were eliminated, making the entire space one room wide, and the sink was changed from a wall-mounted type to an island type, making it a more space centered on the kitchen unit. It has been reborn as a calm and cozy family room.
Afmetings & Verpakking: The size of the Kitchen area is width:3.2m by hight:2.4m by depth:7m.
Etikette: Residence Renovation, Kitchen, spruce CLT panel, Continuous Plate
Produksietegnologie: The Kitchen area is covered with spruce CLT panels (made in Austria).
Ontwerpuitdaging: How Break a Box-form Architecture: In the original project (Continuous Plate House 1.0), it began to think from a box form at first. Although the effective idea was not able to be found out easily, as a result of repeating whether there is any method of breaking that somehow, and trial and error, composition as if the floor, the wall, and the roof were connected continuously and bent and built one plate was obtained.
Navorsing: Response to a Heavy Snowfall: The principal focus of the original project (Continuous Plate House 1.0) was how we should design in response to a heavy snowfall. Since there are some examples of research that snow cannot lie easily due to the influence of a wind as for a flat roof if there is even no parapet, rather, we designed by adopting such a flat roof since 1999.
Inspirasie: This house has been renovated mainly on the first floor because 18 years the completion. It is made by folding a plate, and a rectangular box made of concrete is inserted into it to support the whole. The outer surface of the box is finished with concrete cast in cedar board formwork, leaving the texture of wood even though it is concrete. In order to further strengthen the design concept at the completion, the entire inside of the box, that is, the kitchen area is covered with a wooden finish.
Projekduur: This house was first built in March 2001, and the renovation was completed in August 2019 in Fukui-city, Fukui Pref. in Japan.
Spanlede: Ryumei Fujiki
Yukiko Sato
Beeldkrediete: Image #1: Photographer Hiroshi Ueda
Image #2: Photographer Takeshi Taira
Image #3: Photographer Hiroshi Ueda
Image #4: Photographer Hiroshi Ueda
Image #5: Photographer Takeshi Taira