DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ በ Jack Forman

DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ በ Jack Forman የተሠራ ሲሆን በ ባለ 3 ዲ የታተሙ ቅርጾች እና ምርቶች ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2021 A' Design Award የነሐስ ሽልማት አሸናፊ ነው።

ነሐስባለ 3 ዲ ማተሚያ· 2021

DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ

በ Jack Forman

ደንበኛ: Tangible Media Group, MIT Media Lab

በ ባለ 3 ዲ ማተሚያ ምድብ ውስጥ የ A' Design Award የነሐስ ሽልማት አሸናፊ

34,002

የተረጋገጠ የሽልማት አሸናፊ

ለ #112633 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ

ዲፌክስታይልስ በመደበኛ 3ዲ አታሚዎች ላይ ቀጭን እና ተለዋዋጭ ጨርቃ ጨርቅ ለማምረት የሚያስችል ቴክኒክ ነው። ይህ ዘዴ ከመጠን በታች የሆነ ማውጣትን (under-extrusion) በመቆጣጠር ትናንሽ ጉብታዎች በመካከላቸው ስስ ክሮች ኖሯቸው እንዲፈጠሩ ያደርጋል። በዚህ የሚገኘው ተደጋጋሚ ክፍተት ለተታተመው ጨርቅ የጨርቅ መልክ፣ የአየር ዝውውር ችሎታ፣ ተለዋዋጭነት እና የመወጠር ባህሪ ይሰጠዋል፤ ይህም እንደ ፖሊላክቲክ አሲድ ባሉ ጠንካራ ቁሶች ቢሆንም እንኳ ይሠራል። ጨርቆቹ ከህትመት አልጋው ጋር ቀጥ ብለው ስለሚታተሙ፣ የታጠፉ እና የተጠማዘዙ ቅርጾችን መስራት ይቻላል። አጠቃቀሞቹም አልባሳትን፣ በንክኪ የሚሠሩ በይነገጾችን እና የባድሚንተን ኳሶችን ያካትታሉ። መልቲ (conductive) ፋይበር በጨርቁ ውስጥ የወረዳ መስመሮችን ማካተት ይችላል።

እውቅናው

ስለ A' Design Award የነሐስ ሽልማት

DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ የA' Design Award የነሐስ ሽልማት አሸናፊ ነው፤ ይህም በፈጠራ፣ በብልሃት እና በአስተዋይነት ለሚታወቁ ድንቅ ዲዛይኖች የሚሰጥ እጅግ ከፍተኛ ክብር ያለው እውቅና ነው። የነሐስ አሸናፊዎች የዲዛይነሮቻቸውን ሰፊ ልምድ፣ ምናብ እና ብልሃት የሚያረጋግጡ እጅግ ችሎታ የተሞላባቸው እና በሚያስደንቅ ሁኔታ ፈጠራ ያላቸው ሥራዎች ናቸው። DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ ከፍ ያለ ግምት የሚሰጠው፣ የሚደነቅና የሚወደድ፣ እጅግ ሙያዊና ፈጠራ የተሞላበት ነገር እንደሚሆን ይጠበቃል። ይህ የA' Design Award የነሐስ ሽልማትን ያሸነፈ ዲዛይን በኪነ ጥበብ፣ በሳይንስ፣ በዲዛይን እና በቴክኖሎጂ ምርጥ ልምዶችን ያካትታል፤ ለዝርዝርም በሚሰጠው ትኩረት ምርጥ ነው። DefeXtiles የጨርቃ ጨርቅ ማምረቻ ቴክኒክ ፍላጎቶችን በግሩም ሁኔታ ያረካል፣ ምኞቶችን ይነካል፣ ስሜቶችን ይማርካል እንዲሁም የማወቅ ጉጉትን ይስባል።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
መለያዎች: textile, 3d print, lace, advanced manufacturing, fabric
የማምረቻ ቴክኖሎጂ: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
የዲዛይን ተግዳሮት: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
ምርምር: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
መነሳሻ: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
የፕሮጀክት ጊዜ: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
የሥራ ሂደት: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
የቡድን አባላት: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii