Obj01 የጠረጴዛ መብራት በ Manu Bano የተሠራ ሲሆን በ የመብራት ምርቶች እና ዕቃዎች ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2021 A' Design Award የወርቅ ሽልማት አሸናፊ ነው።

ወርቅመብራት· 2021

Obj01 የጠረጴዛ መብራት

በ Manu Bano

ደንበኛ: Manu BaÑÓ

በ መብራት ምድብ ውስጥ የ A' Design Award የወርቅ ሽልማት አሸናፊ

61,960

የተረጋገጠ የሽልማት አሸናፊ

ለ #119451 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Obj01 የጠረጴዛ መብራት

Obj01 ከአንድ ነጠላ ጥሬ የብረት ሉህ የተሠራ የጠረጴዛ መብራት ሲሆን፣ ብረቱ አረብ ብረት፣ የማይዝግ ብረት ወይም ነሐስ ሊሆን ይችላል። ሉሁ በሌዘር ተቆርጦ ያለ ብየዳ መገጣጠሚያዎች በእጅ በጎማ መዶሻ ይገጣጠማል። መብራቱን ቀላል የጂኦሜትሪ ቅርጾች ይመሠርቱታል፦ አራት ማዕዘን፣ ክብ እና የLED የብርሃን ምንጩን የሚይዝ ሲሊንደር። ክቡ ከተቆረጠ በኋላ የብርሃን መከለያ ይሆናል። የብረቱ ገጽታ በእጅ ተወልውሎ በሰም ይታሸጋል። የተዋሃደ የንክኪ ብርሃን ማስተካከያ (ዲመር) የመብራቱን ኤሌክትሪክ አስተላላፊ አካል ስለሚጠቀም፣ ማንኛውንም ጎን መንካት መብራቱን ያበራል ወይም ያጠፋል እንዲሁም የብርሃኑን መጠን ያስተካክላል። መብራቱ 38 x 22 x 7 ሴ.ሜ ይለካል።

እውቅናው

ስለ A' Design Award የወርቅ ሽልማት

Obj01 የጠረጴዛ መብራት የA' Design Award የወርቅ ሽልማት አሸናፊ ነው፤ ይህም ለመጀመሪያ ደረጃ፣ ድንቅ እና የላቁ ዲዛይኖች የሚሰጥ እጅግ ከፍተኛ ክብር ያለው እውቅና ነው። የወርቅ አሸናፊዎች የዲዛይነሮቻቸውን ብልሃት፣ ጥበብ እና ችሎታ የሚያንጸባርቁ እጅግ ፈጠራ የተሞላባቸው፣ ራዕይ ያላቸው እና በውበታቸው የሚያስደምሙ ሥራዎች ናቸው። Obj01 የጠረጴዛ መብራት ወደር የማይገኝለት ዋጋ የሚሰጥ እጅግ የተመሰገነ፣ አዝማሚያ ፈጣሪና ታላቅ ፈጠራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የወርቅ ሽልማትን ያሸነፈ ዲዛይን የኪነ ጥበብ፣ የሳይንስ፣ የዲዛይን እና የቴክኖሎጂ ድንበሮችን በእጅጉ የሚጠቅምና የሚያስፋፋ አስደናቂና የተከበረ ፕሮጀክት ነው። Obj01 የጠረጴዛ መብራት ጠንካራ የፍላጎት ስሜት ይፈጥራል፣ ፍቅርን ይቀሰቅሳል፣ ፈጠራን ያበረታታል እንዲሁም ይማርከናል።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: OBJ-01 is an understandable simple gesture. At a glance, it reveals its material, its manufacturing process, its function and its use. A plate of raw metal cut by laser and assembled by hand with a rubber hammer. Its size responds to the modulation and format of the material in its commercial standards. Pure geometric figures build the lighting fixture; a rectangle, a circle and a cylinder at the back which contains the LED light spot. The circle, when cut out, adopts the function of a screen.
ልኬቶች እና ማሸጊያ: Dimensions: 38 x 22 x 7 cm
Materials: Steel, Stainless steel or Brass + LED light + custom electronics.
የማምረቻ ቴክኖሎጂ: OBJ-01 is made out of sheet of raw metal, that can be steel, stainless steel or brass, cut by laser and assembled by hand with a rubber hammer and no welding joinery. Its size responds to the modulation and format of the material in its commercial standards. It is polished by hand and sealed with wax.
የዲዛይን ተግዳሮት: As a product designed and produced during 2020, the biggest challenge was to do everything from home. I am used to working with my hands and visiting many workshops. In this case I had to work with processes and materials I already knew because experimenting became impossible. Eventually I bought some machines to be able to bring the production to my home and to be able to control the quality by myself.
ምርምር: On this occasion, there was practically no research, the design process was an exercise of intuition. I decided to reuse the cardboard from online purchases I made during the pandemic and use it as material for mockups. I started working with this cardboard and a knife cutter making different cuts and folds to the cardboard to transform a 2D sheet into a 3D object with different uses. My intention from the beginning was to achieve a small object that I could send flat packed all over the world, so starting the process from a flat sheet was important.
መነሳሻ: In my day to day life I visit many workshops. In this occasion, as I could not go out to be inspired due to the pandemic, the challenge was to face a blank sheet of paper. I started with complex designs that I gradually discarded due to the impossibility of going to the production workshops. I ended up stripping away the complexity of the design and keeping the essentials. I decided to work just with one material and one industrial process which I was familiar with; metal and laser cutting.
የፕሮጀክት ጊዜ: I designed the first OBJ-01 prototype during the pandemic in Mexico City in 2020 and I have been producing new pieces since then.
የሥራ ሂደት: OBJ-01 has an integrated custom touch dimmer. As metal is conductive, this system takes advantage of its properties, so when you touch the lamp in any side it turns on/off. The user can also control the LED brightness by tapping the lamp several times. This makes makes for me the object to look more sculptural as you don't need a black metal box with a dimmer close to the lamp to be able to turn it on, it's just the lamp over your sideboard.