Random Puff 4D ጥልፍ ልብስ በ Rosalie Hsin-Ju Lin

Random Puff 4D ጥልፍ ልብስ በ Rosalie Hsin-Ju Lin የተሠራ ሲሆን በ የጨርቃ ጨርቅ፣ ሸማ፣ ሸካራ፣ ንድፍ እና ጨርቅ ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2023 A' Design Award የብረት ሽልማት አሸናፊ ነው።

ብረትጨርቃ ጨርቅ· 2023

Random Puff 4D ጥልፍ ልብስ

በ Rosalie Hsin-Ju Lin

ደንበኛ: MIT Media Lab

በ ጨርቃ ጨርቅ ምድብ ውስጥ የ A' Design Award የብረት ሽልማት አሸናፊ

41,675

የተረጋገጠ የሽልማት አሸናፊ

ለ #145286 የሽልማት ሁኔታ ያረጋግጡ

ድረ-ገጽ ጎብኝ በ A' Design Award ይመልከቱ ጋዜጣዊ መግለጫ የሽልማት ባጅ

ቀለሞች

ንድፉ

ስለ Random Puff 4D ጥልፍ ልብስ

RandomPuff 4D ጥልፍ ፓፍ ለልብስ መከላከያ የሚጠቀም ልብ ወለድ ፓፍ ነው። ፓፍ መጀመሪያ ላይ ጠፍጣፋ እና ለሙቀት ሲጋለጡ ወደ ጉልላቶች ይወጣሉ. የነቃው ፑፍ ሰውነትን ለማሞቅ በውጫዊው አካባቢ እና በለበሰው መካከል አየርን ይይዛል። ዕድገቱ በ‹አክቲቭ ፋይበር› እና በ‹ስታቲክ ጨርቆች› መካከል የ4D ጥልፍ ቁሳቁስ መስተጋብር ቤተ መጻሕፍት መፍጠርን ያካትታል። ዲዛይነሮች እና ገንቢዎች ከዋና ተጠቃሚዎች ጋር በትብብር ለመስራት የስሌት ዲዛይን መሳሪያዎችን መጠቀም ይችላሉ፣ ልቦለድ ጨርቃጨርቅ እና ለስላሳ ጥሩ ንድፎችን በመፍጠር ከፍተኛ የቴክኖሎጂ ፋሽን፣ ግላዊ እና ቀጣይነት ያለው።

እውቅናው

ስለ A' Design Award የብረት ሽልማት

Random Puff 4D ጥልፍ ልብስ የA' Design Award የብረት ሽልማት አሸናፊ ነው፤ ይህም በጥሩ ሁኔታ ከተነደፉ ፈጠራዎች የሚጠበቁትን ሙያዊና ኢንዱስትሪያዊ መስፈርቶች ለሚያሟሉ ጥሩ ዲዛይኖች የሚሰጥ ከፍተኛ ክብር ያለው እውቅና ነው። የብረት አሸናፊዎች የፈጣሪዎቻቸውን ታላቅ ችሎታ፣ ከፍተኛ ልዩ ሙያ፣ የባለሙያ ግንዛቤ እና የፈጠራ አቅም ያሳያሉ። Random Puff 4D ጥልፍ ልብስ ከፍ ያለ ግምት የሚሰጠው፣ የሚደነቅና የሚወደድ፣ ተግባራዊና ፈጠራ የተሞላበት ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብረት ሽልማትን ያሸነፈ ዲዛይን የኢንዱስትሪ ምርጥ ልምዶችን ያዋህዳል፤ ከእውቀትና ከተሰጥኦ ጋር የተሳሰሩ ብቁ ቴክኒካዊ ባህሪያትም አሉት። Random Puff 4D ጥልፍ ልብስ በጥልቅነቱ የተከበረ ሲሆን ዓለምን የተሻለ ቦታ ለማድረግ የሚረዱ የሕይወት ጥራት ማሻሻያዎችን ለማቅረብ የተነደፈ ነው።

ከንድፉ በስተጀርባ

የፕሬስ ኪት

ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።

ልዩ ባህሪያት: Random Puff is a garment application leveraging the puffy transformation that traps air within the dome pocket to keep the body warm. The double curvature geometry becomes easily fabricated, and personalizable styling is available through the computational design process, which opens up a new design/manufacturing space for a puffy garment.
ልኬቶች እና ማሸጊያ: 500mm x 30mm x 700mm. However, since it's a garment, it can be fold into the size of 300mm x 20mm x 200mm.
መለያዎች: 4D embroidery
የማምረቻ ቴክኖሎጂ: Heat-shrink thread. Neoprene. Machine embroidery. Processing visualizer.
የዲዛይን ተግዳሮት: First, the force balance between active thread and static fabric is a fundamental challenge. There is too much fabric out there with labeled information that does not necessarily lead to our purpose. Second, tension issues happen when new threads or fabric are introduced to the machine. It takes a while to calibrate, and sometimes break the machine if the thread is too thick/thin, or the fabric is too thick/slippery/crispy. Third, to achieve the maximized bi-layer bending, we want to vary the force on both sides so that the inner side does not constraint the outer side.
ምርምር: Research background:
This research demonstrates how machine embroidery with heat-shrinking fibers enables existing fabrics to be augmented with morphing fibers.

Methods/Tools:
Similar to sewing, embroidery is a technique of interlacing upper and bottom threads with the substrate in between, but digitally. For the hardware, a desktop, hobbyist embroidery machine can easily execute wanted samples. For the software, I mainly explored PEmbroidery and Inkstitch for different purposes. PEmbroider is an open-source library housed in Processing that offers a procedural coding environment to generate detailed embroidered files at point and line levels. Inkstitch is also an open-source plug-in embedded in Inkscape that provides a graphical user interface, which is more friendly for primary users.

Results/Insight:
I started off the material characterization by testing different substrates with the same embroidery parameters. Out of 10+ fabrics, fabrics that are lightweight with high springness can hold the morphed structure better. A series of embroidery parameters were also tested systematically with stroke width, density, peak-to-peak distance, stitch spacing, and threading material. The fiber actuator can be tuned from crease(low res) to bend(high res) in a linear pattern. The fiber can be arranged in curves, origami creases, or arbitrary shapes to form more complex pop-up geometry.
መነሳሻ: Working at a NIKE shoe industry, I realized the challenge of transformation between 3D to 2D or vice versa. There's still no clear solution for the tedious, laborious, wasteful process from prototyping to production.

Working as a R&D at a carbon fiber company, I got to witness the power of machine embroidery, where it can digitally place fibers. This way, it can reinforce the artifact in any direction, replace the lamination thus reducing the material waste, and digitalize the process from start to end.
የፕሮጀክት ጊዜ: The project started in September 2021 and finished in December 2021 in Cambridge, MA, United States.
የሥራ ሂደት: First, a closed-curve set of circles, squares, or other arbitrary shapes is generated within the area of a 2D clothing. Second, the design file will be translated to an embroidery file via Processing, a visual output, and procedural coding environment. Third, upload the file to a desktop hobbyist embroidery machine and start embroidery. Lastly, the garment comes out flat from the machine and users can customize where to activate the puffs by heating the embroidery pattern with a steamer or iron.
የቡድን አባላት: Rosalie Hsin-Ju Lin
Skylar Tibbits
Jack Forman
Hiroshi Ishii
የምስል ምስጋና: All IP, copyright, images, video credits belong to Rosalie Hsin-Ju Lin.