Repose ዋና ተግባር፡ የመዝናኛ ወንበር በ John G Williams የተሠራ ሲሆን በ የቤት ዕቃ ዲዛይን የውድድር ምድብ ውስጥ እጅግ ከፍ ያለ ክብር ያለው የ 2019 A' Design Award የብረት ሽልማት አሸናፊ ነው።
ብረትቤት ዕቃ· 2019
Repose ዋና ተግባር፡ የመዝናኛ ወንበር
ደንበኛ: John G Williams Fine Furniture
በ ቤት ዕቃ ምድብ ውስጥ የ A' Design Award የብረት ሽልማት አሸናፊ
የተረጋገጠ የሽልማት አሸናፊ
ለ #75298 የሽልማት ሁኔታ ያረጋግጡንድፉ
ስለ Repose ዋና ተግባር፡ የመዝናኛ ወንበር
የመጽሐፍ ጽሑፍ፡ ሪፖዝ ከጠንካራ የጠንካራ እንጨት የተሠራ የመዝናኛ ወንበር ነው። ፍሬሙ ከአሜሪካ አመድ እንጨት የተሠራ ሲሆን፣ መቀመጫውና ጀርባው ደግሞ ከአሜሪካ ዋልነት እንጨት የተሠሩ ናቸው። ጥልቅ የተጠማዘዘው መቀመጫ የተሠራው ማዕዘናዊ ጠርዞች ያሏቸውን የተቀረጹ የእንጨት ቁርጥራጮችን በማጣበቅ ሲሆን፣ ይህም በርሜል ለመሥራት ጥቅም ላይ የሚውለውን የ"ኩፐሪንግ" ዘዴ እጅግ የላቀ ስሪት ነው። የውስጠኛው ክፍል ጠመዝማዛ ገጽታዎች በልዩ የተዘጋጁ መሳሪያዎች ለስላሳ እንዲሆኑ ተደርገው የተሠሩ ሲሆን፣ የክንድ መቀመጫዎቹ የተከፋፈለ ገጽታ ይዘው ይቆያሉ። የኋላ እግሮቹ በእንፋሎት ታጥፈው የተሠሩ ሲሆን ክንዶቹን በማረጋጋት ይረዳሉ። "ድሮው ቦር ቴነን" መገጣጠሚያዎች ተጨማሪ ጥንካሬን ይሰጣሉ። ግቡ ጠንካራ እንጨትን ብቻ በመጠቀም የተለበጠ ወንበር የሚሰጠውን ምቾት ማግኘት ነበር።
እውቅናው
ስለ A' Design Award የብረት ሽልማት
Repose ዋና ተግባር፡ የመዝናኛ ወንበር የA' Design Award የብረት ሽልማት አሸናፊ ነው፤ ይህም በጥሩ ሁኔታ ከተነደፉ ፈጠራዎች የሚጠበቁትን ሙያዊና ኢንዱስትሪያዊ መስፈርቶች ለሚያሟሉ ጥሩ ዲዛይኖች የሚሰጥ ከፍተኛ ክብር ያለው እውቅና ነው። የብረት አሸናፊዎች የፈጣሪዎቻቸውን ታላቅ ችሎታ፣ ከፍተኛ ልዩ ሙያ፣ የባለሙያ ግንዛቤ እና የፈጠራ አቅም ያሳያሉ። Repose ዋና ተግባር፡ የመዝናኛ ወንበር ከፍ ያለ ግምት የሚሰጠው፣ የሚደነቅና የሚወደድ፣ ተግባራዊና ፈጠራ የተሞላበት ሥራ እንደሚሆን ይጠበቃል። ይህ የA' Design Award የብረት ሽልማትን ያሸነፈ ዲዛይን የኢንዱስትሪ ምርጥ ልምዶችን ያዋህዳል፤ ከእውቀትና ከተሰጥኦ ጋር የተሳሰሩ ብቁ ቴክኒካዊ ባህሪያትም አሉት። Repose ዋና ተግባር፡ የመዝናኛ ወንበር በጥልቅነቱ የተከበረ ሲሆን ዓለምን የተሻለ ቦታ ለማድረግ የሚረዱ የሕይወት ጥራት ማሻሻያዎችን ለማቅረብ የተነደፈ ነው።
ከንድፉ በስተጀርባ
የፕሬስ ኪት
ክሬዲቶች፣ የቡድን አባላት እና ቴክኒካል ዝርዝሮች በዲዛይነሩ የተሰጡ።
- ልዩ ባህሪያት
- The Repose lounge chair is constructed from solid timber. The curved form is realized by an extreme form of the 'coopering' process - similar to the process used to construct round barrels from staves of timber.
- ልኬቶች እና ማሸጊያ
- W 800, D 800, H 830 mm
Constructed from solid hardwood timber. Frame: American Ash. Seat and Back: American Walnut.
Joints use draw bore tenon joints for extra strength - መለያዎች
- Lounge, chair, wooden, artisanal, Danish, timber, art
- የማምረቻ ቴክኖሎጂ
- This chair is not moulded, as some might expect, but is formed from solid timber. The deep sweeping form of the seat is made by laminating various pieces of timber, with angled edges, to form the desired curves. The inside curves are machined into smooth curves with custom made tooling; but the arm uppers retain some of the segmented feel - smooth enough and yet conveying a sense of where the piece came from. The rear legs are steam bent, to retain the overall simplicity, and to attenuate and stabilize the top part of the chair arms. The backrest is also a curved laminated, solid-wood form. It would also be possible to add a thin seat cushion, or perhaps to re-conceive the entire backrest as a custom moulded leather cushion
- የዲዛይን ተግዳሮት
- The major unknown was how strong the seat section would be in bending - in other words if someone sat on the arms, would they break? It became apparent that the arms would need additional support given the depth of the form, and the inevitable flexibility (despite steps taken to add strength in the manufacturing process). It was found that the support pins at the rear of the arms were sufficient to stabilize the entire form - which was confirmed through trial and error.
Overall the challenge was to create a lounge chair that, despite being solid timber, would be as comfortable as an upholstered equivalent - ምርምር
- The method drew heavily on the methods used in earlier designs (eg Zene submitted last year), but took these to extremes to experiment with the art of the possible.
New tooling was developed, in the form of a type of drum sander run between centres on a woodworking lathe, to machine the large concave curves - መነሳሻ
- The inspirational question behind Repose was: if the design language at the core of the Beke and Zene dining ranges were extended to lounge furniture, what would that look like? Could a form be created out of beautiful solid hardwood timber that was profoundly comfortable even though it may be challenging to manufacture? Could some sort of modern shell design be crafted out of solid timber to yield a beautiful striking new design ?
- የፕሮጀክት ጊዜ
- The project was designed and the first prototype built in 4 weeks, starting Dec 2018 and completing in Jan 2019 in Johannesburg South Africa. The design was refined and built in finished materials (Ash and Walnut) over the following 4 weeks.
- የሥራ ሂደት
- The user settles comfortably down into the seat using the armrests.
Various postures are supported sitting comfortably down in the seat.
Getting back out of the seat is very easy, and facilitated by the arms. - የፈጠራ ባለቤትነት
- UK IPO design registration: 6053688
- የቡድን አባላት
- John G Williams
- የምስል ምስጋና
- All images: John G Williams
ስፖንሰር የተደረገ
ከ Designers.org ባሻገር ያስሱ
ከማስታወቂያ አጋሮቻችን ምርቶችን፣ አገልግሎቶችን እና እድሎችን ያግኙ።
ተጨማሪ ለማሰስ
ተዛማጅ ንድፎች
ከተመሳሳይ ምድብ ውስጥ በጥራት የተመረጡ ተጨማሪ ሽልማት-አሸናፊ ንድፎችን ያስሱ።
