DefeXtiles Tehnika izrade tekstila od Jack Forman

Dizajn DefeXtiles Tehnika izrade tekstila od dizajnera Jack Forman je visoko cijenjeni dobitnik prestižne nagrade 2021 Brončana nagrada A' Design Award u kategoriji Dizajn 3D Štampanih Oblika i Proizvoda.

Bronza3D Štampa· 2021

DefeXtiles Tehnika izrade tekstila

autor Jack Forman

Klijent: Tangible Media Group, MIT Media Lab

Dobitnik nagrade Brončana nagrada A' Design Award u kategoriji 3D Štampa

34,002

Verificirani dobitnik nagrade

Verificirajte status nagrade za #112633

Posjetite stranicu Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu DefeXtiles Tehnika izrade tekstila

DefeXtiles je tehnika za proizvodnju tankih, fleksibilnih tekstila na standardnim 3D štampačima. Metoda kontroliše nedovoljnu ekstruziju tako da se formiraju male grudvice sa finim vlaknima između njih. Nastali periodični razmaci daju odštampanoj tkanini izgled sličan tekstilu, prozračnost, fleksibilnost i rastegljivost, čak i kod krutih materijala poput polilaktidne kiseline. Tekstili se štampaju okomito na podlogu za štampanje, čime je omogućena izrada naboranih i zakrivljenih oblika. Primjene uključuju odjeću, opipljive interfejse i badminton loptice (šatlkokove). Provodljivi filament može ugraditi provodne staze kola u tkaninu.

Priznanje

O nagradi Brončana nagrada A' Design Award

DefeXtiles Tehnika izrade tekstila je pobjednik Brončane nagrade A' Design Award, visoko prestižnog priznanja koje se dodjeljuje izvanrednim dizajnima što se odlikuju kreativnošću, domišljatošću i oštroumnošću. Brončani pobjednici izdašno su vješti i upečatljivo kreativni artefakti koji potvrđuju golemo iskustvo, maštu i snalažljivost svojih dizajnera. Očekuje se da DefeXtiles Tehnika izrade tekstila bude visoko cijenjen, voljen i njegovan predmet koji je izuzetno profesionalan i inovativan. Ovaj dizajn koji je osvojio Brončanu nagradu A' Design Award uključuje najbolje prakse u umjetnosti, nauci, dizajnu i tehnologiji i izvrstan je zbog pažnje posvećene detaljima. DefeXtiles Tehnika izrade tekstila sjajno zadovoljava potrebe, dotiče želje, očarava osjećaje i privlači znatiželju.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Oznake: textile, 3d print, lace, advanced manufacturing, fabric
Tehnologija proizvodnje: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Dizajnerski izazov: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Istraživanje: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspiracija: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Trajanje projekta: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Tok rada: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Članovi tima: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii