Spark Putujuća električna gitara od Maxwell Brazo

Dizajn Spark Putujuća električna gitara od dizajnera Maxwell Brazo je visoko cijenjeni dobitnik prestižne nagrade 2022 Brončana nagrada A' Design Award u kategoriji Dizajn Muzičkih Instrumenata.

BronzaMuzički Instrument· 2022

Spark Putujuća električna gitara

autor Maxwell Brazo

Klijent: Maxwell Brazo

Dobitnik nagrade Brončana nagrada A' Design Award u kategoriji Muzički Instrument

39,941

Verificirani dobitnik nagrade

Verificirajte status nagrade za #126635

Posjetite stranicu Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Spark Putujuća električna gitara

Spark je putujuća električna gitara dizajnirana za prenosivost i proizvodnju kod kuće. Tijelo, vrat i hvataljka su štampani tehnikom taloženja topljenog filamenta (FFF) koristeći reciklirana drvena vlakna i aramidne kompozite umjesto tvrdog drveta. Električne i mehaničke komponente su široko dostupne, a sklapanje koristi sistem ožičenja bez lemljenja. Spark se dovršava tradicionalnim metodama, uključujući brušenje, postavljanje pragova i premaz nitroceluloznim lakom. Fiksni mostić bez glave gitare omogućava zadržavanje pune dužine mjerila unutar kompaktnog oblika.

Priznanje

O nagradi Brončana nagrada A' Design Award

Spark Putujuća električna gitara je pobjednik Brončane nagrade A' Design Award, visoko prestižnog priznanja koje se dodjeljuje izvanrednim dizajnima što se odlikuju kreativnošću, domišljatošću i oštroumnošću. Brončani pobjednici izdašno su vješti i upečatljivo kreativni artefakti koji potvrđuju golemo iskustvo, maštu i snalažljivost svojih dizajnera. Očekuje se da Spark Putujuća električna gitara bude visoko cijenjen, voljen i njegovan predmet koji je izuzetno profesionalan i inovativan. Ovaj dizajn koji je osvojio Brončanu nagradu A' Design Award uključuje najbolje prakse u umjetnosti, nauci, dizajnu i tehnologiji i izvrstan je zbog pažnje posvećene detaljima. Spark Putujuća električna gitara sjajno zadovoljava potrebe, dotiče želje, očarava osjećaje i privlači znatiželju.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Focuses on sustainability, accessibility, and adaptability through use of computer aided design software and at-home manufacturing. Fully printed guitar body, neck, and fret board using alternatives to hardwoods. Recycled plastic and wood fiber composites used are able to be fully finished and assembled using simple and standard methods. All electrical and mechanical components are domestically sourced and widely available.
Dimenzije i pakovanje: Product Dimensions: Width 133.35mm (5.25in) x Depth 57.15mm (2.25in) x Height 768.35mm (30.25in), Scale Length: 25.5in, Fret-Board Radius: 9.5 - Modern C Neck Profile - Single Coil & Humbucker Passive Pickups
- Body/Neck/Fretboard (Timber-fill/Nylon AF80 Aramid)
- Headless Fixed Bridge and Double-Ball End Combo Headpiece
- Angled Switch Tele Titanium Control Plate
- Neck Plate (Bolt-On Style)
- Electrosocket Jack Mount
- Low Profile Truss Rod
- Stainless-Steel Hardware and Threaded Inserts
- Solderless Wiring System
Oznake: Guitar, Electric, Travel, 3D Printed, Sustainablity, Instrument, Music, Design
Tehnologija proizvodnje: Realized through Computer-Aided Design and Fused Filament Fabrication technologies. Domestically sourced electrical and mechanical components. Finished using traditional methods (sanding, seating frets, binding, nitrocellulose lacquer finish, etc.).
Dizajnerski izazov: Bio-composite filaments used, while recyclable and or compostable, do not provide adequate structural support for full-scale stringed instruments under tension. Complications with recycled wood-fiber composite filaments required research and testing of additional materials with more effective mechanical properties. Key attributes considered were creep resistance (resistance against deformation under long-term load), tensile strength, elongation at break, density, and ease of printing.
Istraživanje: Initial research into fundamental basics and history of electric guitar construction was crucial to ensure a playable end product. Standardized dimensions of classic high-end models helped to provide a familiar aesthetic and a framework to work within, and use of widely available and popular components to inform the overall design. Influenced by concepts such as compact modularity, right to repair, and the future of at-home manufacturing.
Inspiracija: An exploration to replicate traditional luthier processes through new-age methods of small scale manufacturing and the pursuit of material alternatives for guitar-making. Informed by the idea that making a guitar should be more accessible and experiential; the vision for a transformative guitar able to be printed and assembled at home, inspired by vintage Fender, Steinberger, La Baye 2x4, and lap steel guitars.
Trajanje projekta: The continuation of thesis work while at Rochester Institute of Technology, this project has spent some time in design and development. Prototyping done in 2021 and final working model and process book to be completed in 2022. Based out of Litchfield, Connecticut.
Tok rada: Printable and playable, an innovative solution to cost-effectively produce and assemble your own guitar using recyclable materials, encompassed within a compact full-scale travel silhouette.
Autorstvo slika: Image #1: Creator Maxwell Brazo, 2022.
Image #2: Creator Maxwell Brazo, 2022.
Image #3: Creator Maxwell Brazo, 2022.
Image #4: Photographer Maxwell Brazo, 2022.
Image #5: Creator Maxwell Brazo, 2022.