Hydrospine Balast Za Ronjenje od Ludovic Lahccen and Raoul Morel

Dizajn Hydrospine Balast Za Ronjenje od dizajnera Ludovic Lahccen and Raoul Morel je visoko cijenjeni dobitnik prestižne nagrade 2023 Srebrna nagrada A' Design Award u kategoriji Dizajn Sportske Opreme, Fitnesa i Rekreacijske Opreme.

SrebroSportska Oprema· 2023

Hydrospine Balast Za Ronjenje

autor Ludovic Lahccen and Raoul Morel

Klijent: Apnea Sub

Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Sportska Oprema

756,911

Verificirani dobitnik nagrade

Verificirajte status nagrade za #148412

Posjetite stranicu Pogledajte na A' Design Award Saopštenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Hydrospine Balast Za Ronjenje

Sistem utega za ronjenje na dah, koji omogućava ultra preciznu ravnotežu i plovnost. Njegova svojstva, njegova modularna i brza nosivost, do 6 kg, upotrebljiva u bilo kojem položaju, bilo kojoj disciplini ronjenja na dah. Opremljen je kopčama za brzo otpuštanje i podešavanje za prilagođavanje različitim veličinama, bez obzira na spol, nudeći nevjerovatnu udobnost zbog koje brzo zaboravite na težinu koju nosite. Njegov dizajn dolazi od fuzije morskih životinja i opreme stvorene za brzinu kako bi mu dale vrlo hidrodinamične linije i ponudile optimalno klizanje pod vodom. Njegova svestranost čini ga jedinstvenim konceptom

Priznanje

O nagradi Srebrna nagrada A' Design Award

Hydrospine Balast Za Ronjenje je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i impresivnim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Hydrospine Balast Za Ronjenje bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomjera granice umjetnosti, nauke, dizajna i tehnologije. Hydrospine Balast Za Ronjenje je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.

Iza dizajna

Press komplet

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Dimenzije i pakovanje: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Oznake: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Tehnologija proizvodnje: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Dizajnerski izazov: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Istraživanje: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspiracija: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Trajanje projekta: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Tok rada: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patenti: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Članovi tima: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Autorstvo slika: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel