Dizajn Wall V4 Stalak za televizor od dizajnera Nakamura Co. je visoko cijenjeni dobitnik prestižne nagrade 2023 Srebrna nagrada A' Design Award u kategoriji Dizajn Namještaja.
SrebroNamještaj· 2023
Wall V4 Stalak za televizor
autor Nakamura Co.
Klijent: Wall
Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Namještaj
Verificirani dobitnik nagrade
Verificirajte status nagrade za #148555Dizajn
O dizajnu Wall V4 Stalak za televizor
Wall V4 je samostojeći stalak za televizor dizajniran da drži velike ekrane blizu zida. Televizori do 90 inča mnogih proizvođača mogu se sigurno montirati na željenu visinu. Noseći stub nudi osam nivoa visine od po 5 mm. Kablovi i vijci su skriveni unutar dvoslojnog panela, tako da postavka ostaje uredna. Postolje je izrađeno od čelične ploče debljine 2 mm oblikovane presovanjem i ojačane radijalnim okvirom, što ivicu čini tankom i smanjuje rizik od spoticanja. Sklapanje je jednostavno i ne zahtijeva nikakve izmjene u prostoriji.
Priznanje
O nagradi Srebrna nagrada A' Design Award
Wall V4 Stalak za televizor je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i impresivnim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Wall V4 Stalak za televizor bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomjera granice umjetnosti, nauke, dizajna i tehnologije. Wall V4 Stalak za televizor je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.
Iza dizajna
Press komplet
Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.
- Jedinstvena svojstva
- With WALL V4, almost any TV can be mounted neatly by hanging it on the wall.
Large size TVs (up to 90 inch) from various manufacturers can be installed safely at the preferred height of users. Assembly work is quite simple and requires no special revamping in the room. No wirings or screws are visible externally bringing a sense of harmony and unity with the interior of the user’s living environment. - Dimenzije i pakovanje
- Width 830mm x Depth 520mm x Height 1265mm
- Oznake
- TV stand, interior, TV accessory, caster, cable storage, audio-visual experience, space-saving design,
- Tehnologija proizvodnje
- The structure is based on a 2 mm steel plate that was pressed into a 3D shape and supported by a radial frame in order to achieve a thickness of 2 mm between the base and the floor. The supporting pillar and cables are hidden inside a double-layered panel, The panel slides along that extends when changing the height. Satin powder coating was applied to the entire body, and a woodgrain finish was baked on the surface of the panel giving a texture of high-quality furniture.
- Dizajnerski izazov
- The challenge was to secure strength in a very thin base structure. Since an iron plate alone does not have enough strength, the base includes a set of enforcing elements radially arranged to complement the strength of the 2 mm plate. This structure provides visual neatness and effective spatial utilization. This method proved its effectiveness through repeated vibration tests in a lab that can simulate the strongest earthquakes in Japan.
- Istraživanje
- As conventional TV benches/stands are usually too bulky and easily stands out in a confined room space, our design focused on bringing the TV as close as possible to the wall by reducing the TV stand’s thickness and hiding the TV wiring. Based on the knowledge that a step of 3 mm on the floor can stumble a person, we focused our attention to reduce the thickness of the base for safety reasons so that it makes a simpler and more organized setup.
- Inspiracija
- The impetus for developing this new TV stand was to reduce wasted space.
As the size of TVs becomes larger, TV boards are also getting bigger. As for wall-mounted TVs, they require installation work and repeated height adjustment will become a cumbersome process.
WALL V4 provides a solution to such difficulties. - Trajanje projekta
- The project started in October 2020, and its development was completed in November 2021. The product was put into the market in January 2022.
- Tok rada
- The height of the supporting column can be adjusted with 8 levels (of 5 mm each). Since the metal bracket matches the shape of the back of the TV, it allows fine positional adjustment. Most TV types can be installed at the users’ preferred height. Optional shelves can also be added to expand this TV stand to suit the needs of all users.
- Patenti
- Design Registration No. (Japan): 1614420, 1623536
Patent Registration No. (Japan): 6865495, 6867075
Patent Application No. (Japan): 2020-540017
Design Registration No. (International): DM/101626
Design Registration No. (U.S.): US D881,174 - Članovi tima
- Producer : Akira Nakamura
Designer : Hiroshi Tozawa
Designer : Toshiaki Komori
Supply Chain Manager : Naohisa Inoue - Autorstvo slika
- Image #1: Photographer Nakamura Co.Variations, 2021.
Image #2: Photographer Nakamura Co.Variations, 2021.
Image #3: Photographer Nakamura Co.Variations, 2021.
Image #4: Photographer Nakamura Co.Variations, 2021.
Image #5: Photographer Nakamura Co.Variations, 2021.
Sponzorisano
Istražite izvan Designers.org
Otkrijte proizvode, usluge i prilike od naših oglašivačkih partnera.
Još za istraživanje
Srodni dizajni
Istražite više nagrađenih dizajna iz iste kategorije, odabranih prema zaslugama.