Sprout Bicicleta de JunXiang Cheng and Yi Yang

El disseny Sprout Bicicleta de JunXiang Cheng and Yi Yang és un guanyador molt estimat del prestigiós 2022 A' Design Award de Ferro en la Categoria de Competició de Disseny de Formes i Productes Impresos en 3D.

FerroImpressió 3D· 2022

Sprout Bicicleta

de JunXiang Cheng and Yi Yang

Client: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Guanyador del A' Design Award de Ferro en la Categoria de Impressió 3D

32,018

Guanyador de Premi Verificat

Verificar l'Estat del Premi per al #137286

Veure a A' Design Award Nota de Premsa Insígnia del Premi

Colors

El Disseny

Sobre Sprout Bicicleta

Sprout és una bicicleta fabricada mitjançant impressió tridimensional. El quadre pren forma a través de l'optimització topològica, la qual col·loca material només on és necessari i redueix la quantitat total utilitzada. L'anàlisi estàtica de tensions amb el mètode dels elements finits verifica l'estabilitat de l'estructura del quadre. El model final s'imprimeix en niló d'alta densitat. La bicicleta mesura 1630 mm de longitud, 600 mm d'amplada i 832 mm d'alçada. La impressió elimina la necessitat de motlles costosos, de manera que cada quadre pot seguir un disseny individual.

El Reconeixement

Sobre el A' Design Award de Ferro

Sprout Bicicleta és un guanyador del guardó A' Design Award de Ferro, un reconeixement prestigiós concedit a bons dissenys que compleixen els requisits professionals i industrials esperats de creacions ben dissenyades. Els guanyadors de Ferro demostren una gran habilitat, una alta especialització, una comprensió experta i la capacitat creativa dels seus creadors. Es preveu que Sprout Bicicleta sigui una creació molt apreciada, admirada i estimada que és pràctica i innovadora. Aquest disseny guanyador del guardó A' Design Award de Ferro integra les millors pràctiques del sector i té característiques tècniques competents lligades al coneixement i al talent. Sprout Bicicleta és respectat per la seva minuciositat i està pensat per oferir millores en la qualitat de vida que ajuden a fer del món un lloc millor.

Darrere del Disseny

Dossier de Premsa

Crèdits, membres de l'equip i detalls tècnics proporcionats pel dissenyador.

Propietats Úniques: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Dimensions i Embalatge: Length 1630mm, width600mm, height 832mm
Etiquetes: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Tecnologia de Producció: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Repte de Disseny: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Recerca: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Inspiració: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Durada del Projecte: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Flux d'Operació: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Membres de l'Equip: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao