Mae Airwood Cit Dron gan Uavi Technology yn enillydd uchel ei barch o'r 2020 Gwobr Haearn A' Design Award mawreddog iawn yng Nghategori Cystadleuaeth Tegan.

HaearnTegan· 2020

Airwood Cit Dron

gan Uavi Technology

Cleient: UAVI Technology (Shen Zhen) Limited

Enillydd Gwobr Haearn A' Design Award yn y Categori Tegan

17,987

Enillydd Gwobr Wedi'i Wirio

Gwirio Statws Gwobr ar gyfer #103852

Ymweld â'r Wefan Gweld yn A' Design Award Datganiad i'r Wasg Bathodyn Gwobr

Lliwiau

Y Dyluniad

Am Airwood Cit Dron

Mae Airwood yn git dron cydosod wedi'i gynllunio ar gyfer plant ac oedolion. Mae'r dron pedwar-echel yn defnyddio ffrâm wedi'i gwneud o fwrdd pren tulip cyfansawdd, wedi'i dorri'n ddarnau tenau dau filimetr gan dorrwr laser. Mae defnyddwyr yn cydosod y byrddau pren a'r rhannau electronig â llaw i adeiladu'r dron a'r rheolydd o bell. Mae rheolyddion modiwlaidd, moduron a batris yn caniatáu creu sawl ffrâm a golwg wahanol o un set. Mae'r dron yn cefnogi hofran dan do, ffotograffiaeth awyr a rhaglennu graffigol. Mae'r pren ardystiedig yn lleihau'r defnydd o blastig a metel.

Y Gydnabyddiaeth

Am y Gwobr Haearn A' Design Award

Mae Airwood Cit Dron yn enillydd Gwobr Haearn A' Design Award, cydnabyddiaeth fawreddog a roddir i ddyluniadau da sydd yn bodloni'r gofynion proffesiynol a diwydiannol a ddisgwylir gan greadigaethau wedi'u dylunio'n dda. Mae enillwyr Haearn yn dangos medrusrwydd mawr, arbenigedd uchel, dealltwriaeth arbenigol a gallu creadigol eu crewyr. Disgwylir i Airwood Cit Dron fod yn greadigaeth uchel ei bri, a edmygir ac a anwylir, sydd yn ymarferol ac yn arloesol. Mae'r dyluniad buddugol hwn o Wobr Haearn A' Design Award yn integreiddio arferion gorau'r diwydiant ac mae ganddo nodweddion technegol cymwys wedi'u cysylltu â gwybodaeth ymarferol a dawn. Parchir Airwood Cit Dron am ei drylwyredd ac fe'i dyluniwyd i ddarparu gwelliannau ansawdd bywyd sydd yn helpu i wneud y byd yn lle gwell.

Y Tu Ôl i'r Dyluniad

Pecyn i'r Wasg

Credydau, aelodau tîm a manylion technegol a ddarparwyd gan y dylunydd.

Priodweddau Unigryw: Airwood Wooden DIY Drone is a serials of four-axis drone with a wooden DIY structure as the frame. It uses modularity controllers, motors, batteries, remote controls and other modules to install drones with different structures.The drone has excellent performance and has the basic performance of the mid-end consumer-grade drone in the market, supporting indoor hovering, aerial photography, programming and other functions.
Dimensiynau a Phecynnu: Maximum Drone Dimensions: 185 to 250mm
Axle-base: 120 to 180mm
Drone Weight: 75 to 80g
Drone Battery: 800mah
Flight Time: 6 to 8mins
Flight Distance: 50m
Charging Time: 40mins
Propeller: 65mm ABS
RC Frequency: 2.402 to 2.480 GHz
RC Battery: 250mah
Camera: CMOS 3MP
Camera Resolution: 1280 X 720
Programming Platform: Arduino, Mixly
Packaging Dimensions: 203mmX203mmX58mm
Packaging Materials: Wood board and Printed paper
Tagiau: Drone, Wood, DIY, Modularity, Programmable
Technoleg Cynhyrchu: Different from traditional solid wood products, Airwood selects composite basswood board as the main materials. It has a high utilization rate for wood and a soft surface with silk luster. The board is cut by laser cutter. We only use the 2-mm thick board, so as to ensure the structural strength and make the laser-cut board have a good appearance. The wood boards have FSC and CARB certifications, which mean the whole process is highly environmental friendly.
Her Dylunio: How to use such a thin board to assemble a structurally stable drone is the first difficulty of Airwood design. We need to consider both the wood structural strength, the drone aerodynamics, the fun of the assembly and the appearance. And the diversity of drone frames also brings the new challenges for drone control. In order to have a stable and consistent experience on frames with different weight, inertia and dynamic performance, we need to develop AI algorithms for drone too.
Ymchwil: Drones are often seen as cool and cold. When we found that the market needed a drone that was really for kids, we wanted to change that perception. Drone technologies have no secret, so we designed the assembly structure. Drones can be warm and friendly, so we chose light wood. Drones are very easy to operate, so we use modularity technology and AI algorithms. Drones can also be programmed by kids, so we equipped the drone with the graphical programming function. Thus was born Airwood.
Ysbrydoliaeth: No matter from the ancient wooden buildings with different characteristics, or to the modern wooden products of all kinds, each and every work, always can arouse the resonance and love of everyone. Through our products, we hope to reduce people's use and dependence on plastics and metals. Starting with the pieces of wood, we hope to awaken the craftsman spirit deep in everyone's heart. Starting with a small idea, we hope that innovation can be a habit for both children and adults.
Hyd y Prosiect: Airwood project started in March 2017 in Shenzhen, China. The first MVP version is launched in September 2017. After testing on a small scale, the Airwood formal version is launched in June, 2018. In January 2019, Airwood advanced version with indoor hover and programming functions is launched. Till now, Airwood's model design, module, programming functions are still growing.
Llif Gweithrediad: When get a package of Airwood, users will get a wood box. Inside that, they will get several wood boards and all the electronic parts. They need to assemble all that parts to build a drone, including the remote controller. They also only need to change the wood frame to change Airwood to another appearance. When they want to take aerial photo or try programming flight, just to put the corresponding module on the flight controller and connect.
Patentau: Patented. ZL201820224711.0. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826465.2. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826961.8. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826491.5. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826453.X. UAVI Technology (Shen Zhen) Limited. 2018. China
Patented. ZL201821826454.4. UAVI Technology (Shen Zhen) Limited. 2018. China
Cydnabyddiaeth Delweddau: Image #1: Creator Fang WEN, Ninja of Airwood, 2020.
Image #2: Creator Fang WEN, Remote Controller of Airwood, 2020.
Image #3: Creator Fang WEN, Collection of Airwood, 2020.
Image #4: Photographer Fang WEN, Cubee and Sohpon of Airwood, 2018.
Image #5: Illustrator Fang WEN, Airwood Customization, 2019.
Video Credits: Creator Fang WEN, Airwood Introduction, 2018.