Arch Stol, Ryglæsløs stol af Edvard Glazebrook er en højt anset vinder af den meget prestigefyldte 2021 A' Design Award i Bronze i konkurrencekategorien Møbeldesign.
BronzeMøbler· 2021
Arch Stol, Ryglæsløs stol
Vinder af A' Design Award i Bronze i kategorien Møbler
Verificeret Prisvinder
Verificer Prisstatus for #106853Designet
Om Arch Stol, Ryglæsløs stol
Book Text: Arch er en stol og et ryglæsløst sæde fremstillet af udskåret og sortbejdset lamineret fyrretræ. Designet tager udgangspunkt i enkle og repetitive former og figurer, hvilket giver møblet et homogent og logisk udtryk. Fem identiske buer danner stolens ben og ryglæn, mens det ryglæsløse sæde er sammensat af tre halvbuer, der mødes i midten. Alle dele er skåret ud af en lamineret træplade med en CNC-fræser og derefter limet og samlet med træpløkke. Buerne styrker møblet på dets svageste punkter.
Anerkendelsen
Om A' Design Award i Bronze
Arch Stol, Ryglæsløs stol er vinder af A' Design Award i Bronze, en højt prestigefyldt anerkendelse, der tildeles enestående designs, som udmærker sig ved kreativitet, opfindsomhed og skarpsindighed. Bronzevinderne er rigeligt dygtige og påfaldende kreative artefakter, der bekræfter deres designeres store erfaring, fantasi og snilde. Arch Stol, Ryglæsløs stol forventes at være en højt estimeret, beundret og kær genstand, der er bemærkelsesværdigt professionel og innovativ. Dette design, der har vundet A' Design Award i Bronze, indarbejder bedste praksis inden for kunst, videnskab, design og teknologi og er fremragende på grund af sin sans for detaljer. Arch Stol, Ryglæsløs stol tilfredsstiller pragtfuldt behov, rører længsler, charmerer følelser og appellerer til nysgerrigheden.
Bag Designet
Pressemappe
Credits, teammedlemmer og tekniske detaljer leveret af designeren.
- Unikke Egenskaber
- Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
- Dimensioner & Emballage
- All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm
Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair) - Tags
- Wood, Chair, Stool, Pine wood, Arches, Curve
- Produktionsteknologi
- Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
- Designudfordring
- To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
- Forskning
- The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
- Inspiration
- The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
- Projektvarighed
- The project started in march 2020 - and finished in late May 2020.
- Driftsflow
- The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
- Patenter
- Copyrights belong to Edvard Glazebrook, 2020
- Teammedlemmer
- Edvard Glazebrook
Sponsoreret
Udforsk Udover Designers.org
Opdag produkter, tjenester og muligheder fra vores annoncepartnere.
Mere at Udforske
Relaterede Design
Udforsk flere prisvindende design fra samme kategori, udvalgt efter fortjeneste.
