EnGo Batterikasse af Vladimir Zagorac er en højt anset vinder af den meget prestigefyldte 2022 A' Design Award i Bronze i konkurrencekategorien Energiprodukter, Projekter og Enheder Design.

BronzeEnergi· 2022

EnGo Batterikasse

af Vladimir Zagorac

Klient: EnGo Planet

Vinder af A' Design Award i Bronze i kategorien Energi

31,509

Verificeret Prisvinder

Verificer Prisstatus for #108261

Besøg Websted Se på A' Design Award Pressemeddelelse Prisemblem

Farver

Designet

Om EnGo Batterikasse

EnGo er en bærbar batterikasse designet til brug i 12V og 24V solcelledrevne gadelamper, smarte bænke og andre strømprodukter. Det kompakte hus passer i én hånd og kan stables i flere retninger, så kabler og stik kan føres mellem enhederne. Et aftageligt håndtag gør det nemmere at bære og placere kassen og kan opbevares inde i huset, når det ikke er i brug. Terminaldækslerne kan spændes i hånden eller med en unbrakonøgle. Drift og batterikapacitet kan overvåges på en smartphone via Bluetooth. Kassen er fremstillet af sprøjtegoet polymer.

Anerkendelsen

Om A' Design Award i Bronze

EnGo Batterikasse er vinder af A' Design Award i Bronze, en højt prestigefyldt anerkendelse, der tildeles enestående designs, som udmærker sig ved kreativitet, opfindsomhed og skarpsindighed. Bronzevinderne er rigeligt dygtige og påfaldende kreative artefakter, der bekræfter deres designeres store erfaring, fantasi og snilde. EnGo Batterikasse forventes at være en højt estimeret, beundret og kær genstand, der er bemærkelsesværdigt professionel og innovativ. Dette design, der har vundet A' Design Award i Bronze, indarbejder bedste praksis inden for kunst, videnskab, design og teknologi og er fremragende på grund af sin sans for detaljer. EnGo Batterikasse tilfredsstiller pragtfuldt behov, rører længsler, charmerer følelser og appellerer til nysgerrigheden.

Bag Designet

Pressemappe

Credits, teammedlemmer og tekniske detaljer leveret af designeren.

Unikke Egenskaber: The battery case is minimalistic and contemporary, portable, and fits in one hand, stackable, easily operated, and customizable. The design implements large radii and beveled edges to maximally save space, allowing the cables and connectors to fall between the cases. The cooling opening accepts a detachable multifunctional handle. The battery terminal caps can be tightened by both a hand and an Allen key. The operation and battery capacity can be monitored by a smartphone via Bluetooth.
Dimensioner & Emballage: Height: 310mm, Width: 125mm, Depth: 68mm (without the handle)
Tags: Smart Battery, Power Bank, Portable, Stackable, Multifunctional, Customizable
Produktionsteknologi: Injection-molded polymer, bent chrome-plated rod
Designudfordring: Intended multifunctionality required the handle to be used to carry and lower or pull up the battery in or out of position in large sets. The solution is flexible and can easily be inserted into the carrying position, held in place by outward-bent ends. It can be removed or slipped safely inside the housing when not in use and can carry two units at the same time if needed. Safe stackability was achieved through two pairs of recesses on the upper side, one pair being the terminal cap recesses.
Forskning: The case was planned for 12V & 24V solar light poles and Smart benches, as well as an individual product, but also for differently orientable sets within high-end solutions of other manufacturers, like power wall and power bank products, electric vehicles, yachts, etc. For that reason, the positions of the terminals are customizable during production to fit the product's intention or depending on the type of set, also enabling easier connection and usage of cables of short or uniform length.
Inspiration: The design project was initiated after lithium was found in a deposit in Serbia. Among battery-operated products are EnGo Planet solutions, so it was expected that the company would invest in the development of housings for lithium-based batteries. The end product would be used in the company's solar solutions or marketed separately for other usages.
Projektvarighed: The project lasted several weeks and took place in Belgrade, Serbia.
Driftsflow: One unit is a portable smart battery, while a set can be oriented in several ways for different usages in other products. Rotating a case can pair up a set into a hexagonal vertical composition suitable for placement inside a light pole. A large number of units can be stacked into a rectangular composition for other usages, allowing cables of up to 10mm in diameter to be routed horizontally, and MC4 solar connectors 19mm in diameter to be routed vertically between the units.
Billedkreditering: Vladimir Zagorac