Disainilahendus Morning Dew Regenereeritud Sõrmus, autor Xiangzhi Zhao

Disainilahendus Morning Dew Regenereeritud Sõrmus, mille autor on Xiangzhi Zhao, on kõrgelt hinnatud 2020 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Ehtedisain.

PronksEhted· 2020

Morning Dew Regenereeritud Sõrmus

disainer: Xiangzhi Zhao

Klient: Dist industrial design studio

Auhind Pronksauhind A' Design Award kategoorias Ehted

17,364

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #103005

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Morning Dew Regenereeritud Sõrmus

Hommikune kaste valmistati materjalidele keskendumise abil väärtuslike metallide taaskasutamise meetodil, et valmistada materjalidena regenereeritud kuld ja hõbe. Valmistamismeetod on lihtne meetod poorset amiini sisaldava amiini kasutamiseks valitud metalliioonide adsorbeerimiseks ja ka ravivedeliku taaskasutamiseks töötlemisprotsessis. Väärtuslike metallide taaskasutamiseks on oluline valida keskkonnasõbralikumad meetodid.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Morning Dew Regenereeritud Sõrmus on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Morning Dew Regenereeritud Sõrmus peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Morning Dew Regenereeritud Sõrmus rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The ring was designed with a focus on materials. In designing the "morning dew", an original and greener method of recovering precious metals is used to prepare regenerated gold and silver as materials. The preparation method is simply to use an amine-containing porous material to adsorb selected metal ions, and to achieve reuse of the treatment liquid in the treatment process, so as to recover precious metals by more environmentally friendly methods.
Mõõtmed ja pakend: Width 20 mm x Depth 20 mm x Height 4 mm
Sildid: Ring, Grace, environmental protection, New material, Artistic
Tootmistehnoloogia: The original green precious metal recovery method is to copolymerize 4,4 '- (hexachloroisopropyl) bisphenol with melamine in alkaline solution, the obtained amine-containing porous material can absorb selected metal ions in the solution, and the treatment liquid can be reused to reduce the production of waste water. The material used in “morning dew " is made entirely from this extraction method.
Disainiülesanne: The molar ratio of cyanamide to hexachlorophenol A is from 3:1.9 to 3: 2.2. Whenthe molar ratio is less than 3:1.9 or more than 3:2.2, the yield is significantly reduced. This characteristic is obtained through numerous experiments. In order to design a metal method with more high-yield regeneration, much efforts and experiments must be made.
Uurimistöö: Through many experiments and comparative analysis, it is concluded that the dehydration reaction temperature of the material used for regenerating metal is 136-140 celsius degree, the reaction time is 3-5 hours, and when the time is less than 3 hours, the polycondensation is incomplete and the yield is low.
Inspiratsioon: According to UNEP, an average of 1 ton of ordinary electronic waste contains 490 kg of metal. If not recycled, it will cause a huge waste of resources. The most commonly used pyrometallurgical technology for disposal of electronic waste will produce toxic gases, such as fluorocarbons, bromine flame retardants and organic compounds, which tend to generate dioxins under oxidation conditions. In recent years, the solid-phase extraction method has less solvent consumption, simple reaction and fast speed. However, waste of liquid of this technology has become a problem in treatment process.
Projekti kestus: The project began in Beijing in 2018, applied for a technology patent in early 2019, and was completed in 2019.
Tööprotsess: The design of “morning dew " ring focuses on the material, which is made of regenerated gold and silver by a greener way of recovering precious metals. Based on this material, a ring with the shape of dew, wrapped by vines, is designed. A scrap circuit board is much more valuable than a gold mine of the same quality in terms of gold proportion. Therefore, reuse of electronic waste is not receiving enough attention but worth of attention and implementation. It is hoped that the design of "morning dew" will provide guidance of reducing resource waste and promoting resource recovery.