Disainilahendus Hours on the Slope Tehas, kontorihoone, autor T.E and C Architects Associates

Disainilahendus Hours on the Slope Tehas, kontorihoone, mille autor on T.E and C Architects Associates, on kõrgelt hinnatud 2021 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Arhitektuuri, hoonete ja rajatiste disain.

PronksArhitektuur· 2021

Hours on the Slope Tehas, kontorihoone

disainer: T.E and C Architects Associates

Klient: T.E and C Architects Associates

Auhind Pronksauhind A' Design Award kategoorias Arhitektuur

10,698

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #106869

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Hours on the Slope Tehas, kontorihoone

Nõlvatunnid on tehase- ja kontorikompleks Taichungis, Taiwanis. Krunt on jaotatud kolmeks hooneks, mis on paigutatud vastavalt keskkonnale ja ilmakaartele. Läänepoolsel küljel, kus päikesekiirgus on tugev, rõhutavad tumedad aknad ja väiksem aknapindala hoone mahulisust. Välisseinu katavad graniit ja roheline ehituskattesüsteem. Kontorihoone kaarjale pinnale valiti looduslik kivimosaiik. Maa-alune torustikusüsteem juhib jahedat välisõhku tehasesse ning katusel asuvad päikesepaneelid varjavad ülemise korruse parklaala.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Hours on the Slope Tehas, kontorihoone on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Hours on the Slope Tehas, kontorihoone peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Hours on the Slope Tehas, kontorihoone rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The entire area is mainly divided into three buildings, while the design takes into consideration the relationship between the environment and the direction, adopting dark windows while reducing window area in ordered arrangement on the west side with excessive sun exposure to highlight the sense of volume.
Mõõtmed ja pakend: The project is 63767 square meter.
Sildid: Architecture, Factory, Office, Plant, Building
Tootmistehnoloogia: The factory plant with the largest area has adopted the coating system with the Green Building Mark, which contains no formaldehyde, TVOC volatile organic compounds, and hazardous substances; moreover, it is a coating system featuring low-carbon-footprint, no excessive external wall decorative wastes…etc. Due to the characteristics of the coating system such as gapless and low water absorption, etc., it can clean itself when the rain pours, making it easy to maintain.
Disainiülesanne: This project has also set up a rainwater recycling pool, collecting roof water for watering potted plants, it further set up an eco-pool in the alfresco retracted 20m of greenbelt, establishing water recirculation system to proceed with the conditioning of the microclimate inside the base.
Uurimistöö: A large area of approximately 12,250 m2 of solar energy layout is placed on top of the roof, where besides conducting solar energy power generation, it can also act as a heat insulator for the parking lot on the top floor. The design also placed the air-conditioned factory plant underneath the parking lot, capable of completely blocking off the roof heat transmission caused by the large roof, thereby decreasing the air-conditioning energy consumption.
Inspiratsioon: The main materials for the external wall include granite and green building coating system. To create the rock solid spirit of the enterprise and the fusion with the environment, the office building selected natural stone for the mosaic on the curved surface.
Projekti kestus: The project finished in December 2018 in Taichung, Taiwan.
Tööprotsess: The main factory plant section is air-conditioned with the special arrangement of buried pipeline wind-guiding system, which guides in the external air at a lower temperature from the inlet/outlet on the north side together with potted plant section via the particular height difference of this base, which then cools the temperature down via the deep soil 10m underground, thereby accessing outdoor fresh air for air-conditioner cooling and exchange through the most natural cooling approach.
Meeskonnaliikmed: Design Director: Wen Tong Hsieh
Designer: Kang Cheng Liu
Yung Chi Huang
Sheng Xiang Lin
Cheng-Tsung Chen
Ming-Hsing Su
Pei-Yu Lin
Yu-Chien Huang
Piltide autorid: Image #1-5: Photographer Pei Yu Lin, Hours on the Slope, 2019.