Disainilahendus Aspen Statiivipea, autor Colorado Tripod Company

Disainilahendus Aspen Statiivipea, mille autor on Colorado Tripod Company, on kõrgelt hinnatud 2021 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Kaamera ja fotoseadmete disain.

HõbeFotoseadmed· 2021

Aspen Statiivipea

disainer: Colorado Tripod Company

Klient: Colorado Tripod Company

Auhind Hõbeauhind A' Design Award kategoorias Fotoseadmed

39,753

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #108315

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Aspen Statiivipea

Aspen on statiivipea, mis on loodud fotokomponeerimise lihtsustamiseks. Avatud raam võimaldab kinnitatud kaamerat pöörata mõlemas suunas tublisti üle 90 kraadi, tagades kiired üleminekud maastiku- ja portreesuuna vahel ilma mahukate L-kujuliste kinnitusteta. Kuulil on õõnes südamik aukudega, mis vähendavad kaalu, säilitades samas tugevuse. Reguleeritav hoovaklamber hoiab paigal laia valikut kaameraplaate, hõõrdumise juhtimine seab takistuse ning panoraamlukk lubab täispööret panoraamfotode jaoks. Aspen on freesitud kõvaanodeeritud alumiiniumist.

Tunnustus

Auhinnast Hõbeauhind A' Design Award

Aspen Statiivipea on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Aspen Statiivipea peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Aspen Statiivipea on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
Mõõtmed ja pakend: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
Sildid: tripod head, ball head, camera support, tripod, photography accessory
Tootmistehnoloogia: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
Disainiülesanne: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
Uurimistöö: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
Inspiratsioon: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
Projekti kestus: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
Tööprotsess: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
Patendid: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
Meeskonnaliikmed: Colorado Tripod Company