Liigu sisu juurde
Disainilahendus Chouchin Küünal, autor James Kaoru Bury

Disainilahendus Chouchin Küünal, mille autor on James Kaoru Bury, on kõrgelt hinnatud 2022 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Valgustitoodete ja -tarvikute disain.


PronksValgustus· 2022

Chouchin Küünal

disainer: James Kaoru Bury

Klient: James Bury Design Studio

Auhind Pronksauhind A' Design Award kategoorias Valgustus

10,897

Värvid

Disain

Teosest Chouchin Küünal

Chouchin küünal on sammasküünal, mis vaha sees sulades võtab järk-järgult traditsioonilise Jaapani Chouchin laterna kuju. Süütamisel näeb küünal välja tavaline, kuid aja jooksul sulab ainult sisemine vaha ning välimus muutub aeglaselt. Kasutatakse kahte tüüpi vaha. Välimise vaha sulamistemperatuur on kõrgem, mistõttu välimine kest säilitab oma kuju ja hoiab sulanud vaha sees, ilma alusnõu vajaduseta. Tulemuseks on pehme ja õrn valgus, mis on mõeldud aitama inimestel kodus enne magamaminekut lõõgastuda. Täitepakend võimaldab küünalt korduvalt kasutada.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Chouchin Küünal on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Chouchin Küünal peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Chouchin Küünal rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused
Chouchin Candle is a pillar candle that gradually turns into a Japanese traditional Chouchin lantern as the wax melts inside.
When the candle is first lit, it looks like a normal candle, but as time passes, only the inside wax melts and gradually changes its appearance.
Different types of wax are used for inside and outside, and the outer wax does not melt even though the candle is all made of wax, allowing it to create a soft and gentle light.
Mõõtmed ja pakend
Dimentions: H170mm x W 90mm x D90mm
Candle burning hour: 70 hours.

When the candle is finished, simply purchase a refill and the candle can be used repeatedly.
Sildid
Candle, Lighting, Craft, Japanese, Gift
Tootmistehnoloogia
Normally the outer rim of the pillar candles melt, which causes the melted wax to leak out. Chouchin Candle uses two types of wax for inside and outside. The outer wax which is a patented technology of Pegasus Candle Co., Ltd. from Kurashiki Japan, which has a higher melting point than the normal wax, which allows it to keep the outer shape as it is and prevent the hot melting wax from leaking out. This means that there is no need to place a dish under the candle, allowing the candle to be used in the most minimal state and blend into the interior, which is a game changer to the aesthetics and usability of candles.
Disainiülesanne
Although the outer wax has a higher melting point, if the fire is too close or if there is any wind current, the outer wax cannot hold its shape and eventually melts. It was a challenge to keep the candle in compact size, and the fire is away enough so that the outer wax does not melt. We have tried more than 30 prototypes and tweaked the materials and size to create the current product.
Inspiratsioon
The purpose of Chouchin Candle is to create a more relaxing atmosphere in peoples homes, and encourage the user to turn the lights off a few hours before going to bed, which increases the sleeping quality.
This became more approachable by discovering the gradually changing to lantern gimmick. Since the candle becomes more beautiful as it is used, it develops in ones mind a nurturing emotion towards the candle, which becomes a motivation to use the candle everyday.
Projekti kestus
The project started in June 2018 and finished in June 2021 in Tokyo Japan, and was exhibited in DESIGNART TOKYO in October 2020.
Tööprotsess
Simply light up the candle wick and enjoy. Only the inner wax will melt, and the outer wax will keep its shape since the outer wax uses a patented Japanese technology, and it has a higher melting point. When the candle is finished, insert the refill and the candle can be reused.

Sponsoreeritud

Avasta rohkem kui Designers.org

Avasta tooteid, teenuseid ja võimalusi meie reklaamipartneritelt.

Hea disain väärib suurt tunnustust

A' Design Award on rahvusvaheline žüriiga auhind hea disaini eest. Osale A' Design Awardil, et saada võimalus pälvida meritokraatlik tunnustus, kuulsus, prestiiž ja avalik tähelepanu oma tööle. Esita oma töö A' Design Awardile ja võistle ihaldatud A' Design Prize'i nimel.

Esita kandidatuur