Disainilahendus Yatsugatake Villa Villa, autor Kiyotoshi Mori and Natsuko Kawamura

Disainilahendus Yatsugatake Villa Villa, mille autor on Kiyotoshi Mori and Natsuko Kawamura, on kõrgelt hinnatud 2022 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Arhitektuuri, hoonete ja rajatiste disain.

PronksArhitektuur· 2022

Yatsugatake Villa Villa

disainer: Kiyotoshi Mori and Natsuko Kawamura

Klient: MDS Co., Ltd.

Auhind Pronksauhind A' Design Award kategoorias Arhitektuur

11,775

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #129187

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Yatsugatake Villa Villa

Yatsugatake villa on suvekodu, mis asub Hokuto linnas, Yamanashi prefektuuris Jaapanis. Hoone koosneb kolmest trapetsikujulisest torust, mis on paigutatud lehvikukujuliselt ja avanevad lõuna suunas. Lai lõunapoolne avaus laseb külma talve ajal sisse päikesevalgust, samal ajal kui väljaulatuv katus ja külgseinad tõkestavad tugevat suvist päikest. Põhja- ja lõunaküljel asuvad aknad lasevad tuulel siseruumidest läbi liikuda. Kasutatud on traditsioonilist Jaapani puitkonstruktsiooni koos seedripuidu, krohvi ja shoji-ekraanidega. Suletud shoji-ekraanid annavad pehme valguse, avatud ekraanid aga raamivad ümbritsevat mägimaastikku.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Yatsugatake Villa Villa on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Yatsugatake Villa Villa peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Yatsugatake Villa Villa rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The exterior is characterized by three modern trapezoid tubes, deforming the traditional Japanese space under deep eaves to frame the landscape in four directions. The form was derived from meticulous calculation of precipitation, the sun's movement in summer and winter, and the thermal environment. Shoji paper screens offer a space filled with soft light iconic of Japanese culture when closed, and switch to the majestic scenery framed by the walls when opened, providing two alternating scenes.
Mõõtmed ja pakend: Site Area 691.00m2
Total Floor Area 110.01 m2 (1F 71.65 m2, 2F 38.36 m2)
W17,400mm x D12,300mm x H6,139mm
Sildid: Villa, Sun light, Wind, Fan-shape, Wooden, Mountain, Three adjacent shells, Sho-ji, Eaves, Farming
Tootmistehnoloogia: Contrary to the contemporary style guided by precipitation, sun rays and the surrounding environment, the construction of the house incorporates traditional Japanese wooden construction methods, with earthquake-resistant walls and large openings. Traditional Japanese techniques and components are used throughout, including plastering on the curved openings and fittings such as shoji and ranma (partition with ventilation and daylighting functions), creating a vernacular architecture.
Disainiülesanne: In Japan, especially in rural areas, the number of carpenters capable of building elaborate wooden houses is decreasing, and it was difficult to find a builder who could construct a building with a unique (challenging) design. In spite of the modern design, Japanese cedar and plastering materials are used, and shoji screens as well as other traditional materials handed down from generation to generation are fit in by the indigenous module method, enabling the definition of a Japanese space.
Uurimistöö: Three trapezoid tubes with north-south openings sit wide open towards the south to maximize winter daylight. Glass surfaces are set back from the roof edge to avoid direct south sun rays in summer. Side walls are arranged to block the west sun. The footprint is set back from the roof edge, partly to reduce soil excavation (deep foundation below the frost line is required), creating a sitting area free from rain dripping from the roof. It is a modern version of traditional Japanese engawa space.
Inspiratsioon: With exterior walls arranged to resemble a fan, the house provides framing for the landscape, maximizing the location on a plateau surrounded by fields and trees with panoramic view of mountain ranges in the distance. It is a summer resort, slightly cooler than humid summers in Tokyo, and yet the sun rays are strong and the winters are cold. The roof was extended to block direct sunlight in the summer and side walls to keep the western sun out, resulting in a series of tubular forms.
Projekti kestus: The project was completed in Hokuto-City, Yamanashi, Japan in 2012
Tööprotsess: Considering the cold winter, the building is built in a fan shape, open to the south, in order to maximize the sunlight while the sun moves. On the other hand, in summer, the roofs and walls of the trapezoid tubes block the strong sun rays, creating shadows inside, and windows at the north and south let the breeze through to cool the airy space. The layout, guided by the thermal environment, provides various interior scenes of varying depths as seen through the openings that connect the spaces.
Meeskonnaliikmed: Kiyotoshi Mori
Natsuko Kawamura
Piltide autorid: Photography: Toshiyuki Yano