Disainilahendus Hydrospine Vabasukeldumisballast, autor Ludovic Lahccen and Raoul Morel

Disainilahendus Hydrospine Vabasukeldumisballast, mille autor on Ludovic Lahccen and Raoul Morel, on kõrgelt hinnatud 2023 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Sporditarvete, treeningseadmete ja vaba aja varustuse disain.

HõbeSporditarbed· 2023

Hydrospine Vabasukeldumisballast

disainer: Ludovic Lahccen and Raoul Morel

Klient: Apnea Sub

Auhind Hõbeauhind A' Design Award kategoorias Sporditarbed

756,911

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #148412

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Hydrospine Vabasukeldumisballast

Vabasukeldumiseks mõeldud seljaraskussüsteem, mis võimaldab ülitäpset tasakaalu ja ujuvust. Selle omadused, modulaarne ja kiire kandevõime, kuni 6 kg, kasutatav igas asendis, mis tahes vabasukeldumise distsipliinis. See on varustatud kiirkinnitus- ja reguleerimispandlaga, mida saab kohandada erinevate suurustega, olenemata soost, pakkudes uskumatut mugavust, mis unustab kiiresti kaasaskantava raskuse. Selle disain tuleneb mereloomade ja kiiruse jaoks loodud varustuse sulandumisest, et anda sellele väga hüdrodünaamilised jooned ja pakkuda optimaalset libisemist vee all. Selle mitmekülgsus muudab selle ainulaadseks kontseptsiooniks

Tunnustus

Auhinnast Hõbeauhind A' Design Award

Hydrospine Vabasukeldumisballast on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Hydrospine Vabasukeldumisballast peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Hydrospine Vabasukeldumisballast on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: It is the only dorsal ballast of this type that can support up to six kilos, the leads distribution in the container which can be quickly and easily modulated. Its assets are, its modularity, its comfort which you forget the weight transported, its hydrodynamic look for an optimal glide. Its safety with its quick release buckle. It can be used in all freediving activities and in all positions. It is undoubtedly the most advanced system to date allowing for ultra-precise buoyancy and neutrality.
Mõõtmed ja pakend: Storage shell 150mm x 45mm x 370mm
Lead 105mm x 7,5mm x 40mm
Sildid: Freediving, apnea, dive, diving, weight, spine, hydrodynamic, lestage, weighting, sport
Tootmistehnoloogia: The materials used are all waterproof, easy to source and inexpensive (elastic and polypropylene straps, plastic buckles, textiles and lead). The shell is made of thermoformed textile with a zipped side opening. The internal structure has slots to fix the leads like a spine and accordion ribs to follow all movements. The leads were designed from a single template, to limit the molds and keep a hydrodynamic structure. Thus covering 98% of user needs. The rear nozzle allows air to escape.
Disainiülesanne: Many factors need to be taken into account and it has not always been easy for some team members to understand them. A freediving session was necessary to measure the problem. The biggest difficulty was the development of the harness, because it was difficult to hold 6 kg on the back and at the same time not prevent the rib cage from inflating, to be safe with a quick release and to be homologated in competition, to adapt to different morphologies. This required extensive structural and material testing.
Uurimistöö: Before launching, we inventoried all the solutions available on the market and surveyed a panel of a hundred freedivers.
Next, we listed all the desired requirements for the product, assigning them a degree of importance. As well as the impacts that will occur on the different use cases. We quickly agree to test each hypothesis by prototyping it summarily. It was a principle rich in lessons allowing us to see the gap between the idea and reality while showing what needs to be corrected.
Inspiratsioon: The concept was born out of not having enough practical and comfortable weight. As we would like a different approach, we did not have an established reference. We let our imagination free by relying on other areas. For the design of the shapes, we were inspired by sea animals as well as machines created for speed. Hydrodynamics also influenced the structure. Forcing us to review the structure to keep the modular aspect, and that it can remain flexible to follow the different body movements.
Projekti kestus: The project started solo in August 2019 in Lille, France. Then continued with the Transalley incubator in Valenciennes, France, from September 2020 to September 2022. Then solo again, with the collaboration of Raoul Morel as product designer.
Tööprotsess: The equipment is carried like a backpack. The buckle at the front allows the straps to be adjusted according to size and to instantly release the weight with one hand by simple pressure.
The envelope containing the leads has reception racks to hold the pellets in place which are sandwiched with the upper part of the cover so that they cannot move. Leads can be placed in any order for extremely precise balancing.
Patendid: Patent application FR2111503 filed on October 28, 2021. Transformed into a Certificate of Utility on September 07, 2022. Title: Diving equipment for freediver, Possessor: Ludovic Lahccen
Meeskonnaliikmed: Creative Designer and Art Director: Ludovic Lahccen
Product Designer: Raoul Morel
Technical and Mechanical Engineer: Steven Pingon
Engineer and technical design office: Charles Pionchon
Tech Designer and prototypes: Alan Philippart
Plastics processing and 3D printing: Olivier Paul
Textile prototypes: Christiane Lefebvre
Piltide autorid: Main image is Image #1 Raoul Morel
Optional Image #1 Raoul Morel
Optional Image #2 Raoul Morel
Optional Image #3 Raoul Morel
Optional Image #4 Raoul Morel