Disainilahendus Grampo Valgusti, autor Bruno De Lazzari

Disainilahendus Grampo Valgusti, mille autor on Bruno De Lazzari, on kõrgelt hinnatud 2024 auhinna Kuldauhind A' Design Award võitja konkursi kategoorias Valgustitoodete ja -tarvikute disain.

KuldValgustus· 2024

Grampo Valgusti

disainer: Bruno De Lazzari

Klient: Atelier Bruno De Lazzari

Auhind Kuldauhind A' Design Award kategoorias Valgustus

528,110

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #157261

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Grampo Valgusti

Grampo Lamp kasutab Brasiilia puidukiudude loomulikku paindlikkust, võimaldades valgusallikat painutada, kinnitada või eemaldada, muutes selle akutoitel töötavaks taskulambiks, mis laeb alusse kinnitamisel. Disain esitleb materjali loomuomadusi ja pühendumust jätkusuutlikule hankele. Projekt ühendab traditsioonilise puutöö täiustatud tootmisega, sealhulgas 3D-printimisega. Grampo Lamp on inspireeritud Brasiilia puidudisaini rikkalikust traditsioonist, kuid integreerib funktsionaalsusi, mis on kättesaadavad vaid kaasajal.

Tunnustus

Auhinnast Kuldauhind A' Design Award

Grampo Valgusti on Kuldauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse esmaklassilistele, imelistele ja silmapaistvatele disainidele. Kuldvõitjad on ülimalt uuenduslikud, visioonilised ja glamuurselt pimestavad looming, mis peegeldab oma disainerite geniaalsust, tarkust ja oskusi. Grampo Valgusti peaks olema kõrgelt kiidetud, suundi seadev ja monumentaalne leiutis, mis pakub enneolematut väärtust. See Kuldauhinna A' Design Award võidudisain on suurejooneline, lugupeetud projekt, mis toob suurt kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Grampo Valgusti tekitab intensiivset soovi, äratab kirge, julgustab loovust ja lummab meid.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The Grampo Lamp, made from sustainably managed Brazilian tropical wood, showcases a unique, flexible design. Its column, with a vertical slit, allows for adjustable positioning of the light spot. This innovation, coupled with a wireless energy transmission system using stainless steel blades, offers versatility and doubles as an emergency light. The touch-sensitive control with three intensity levels, smooth lines, and artisanal craftsmanship highlight its functional elegance.
Mõõtmed ja pakend: Height: 1700mm

Lenght: 350mm

Weight: 10kg
Sildid: wood, flexibility, removable, charging
Tootmistehnoloogia: All wood is solid, machined, and hand-finished. The top part was made with grooves for the electrical connection, slightly offset to prevent short-circuiting. The wood spot houses all electrical components, fitted inside a 3D printed case, allowing the entire functional part to be removed for maintenance. Connections to the wires from the previous part are made with laser-cut stainless steel 'flaps' that are insulated from each other, sending energy to the battery. The base houses the wiring that is connected to a USB-C port for charging.
Disainiülesanne: The most difficult part of designing and executing the lamp was to harmonize the wood's flexibility with the internal wire connection that allows the lamp to charge when fitted, and also to fit the electronic components inside the removable spot.
Uurimistöö: The project started from a need to illuminate one of my wall pieces in an exposition; I needed an adjustable light for that. I made 5 pieces for the expo, very simple and minimalist, with wires connected permanently to the spot, and a steel column, but the flexible wood concept was already there at the top. I thought I could expand the idea by making the spot wireless, and felt that the overall aspects of the piece could be sleeker and more elegant, inspired a bit by modern-era Brazilian designers.
Inspiratsioon: Inspired by the flexibility of sustainably sourced Brazilian tropical wood, the Grampo Lamp marries natural beauty with innovative design. It reflects a commitment to environmental responsibility and a fascination with wood's natural properties. This project combines traditional woodworking with advanced manufacturing, including 3D printing, to create a versatile, aesthetically pleasing lamp that pays homage to national identity while pushing the boundaries of sustainable design.
Projekti kestus: The project started in April 2023 and finished in December 2024. The design and prototyping were all carried out in my shop in Porto Alegre, Brazil.
Tööprotsess: The lamp can be adjusted slightly in height and angled to change direction. There is a touch-sensitive button on top of the spot to turn on and dim the light. This spot can be removed, serving as a wireless lantern. The battery is also useful during a blackout, or to allow the whole stand to be moved where there is no nearby energy connection, such as outdoors.