Disainilahendus Aida Sekkei Precut Tehas, autor Nobuaki Miyashita

Disainilahendus Aida Sekkei Precut Tehas, mille autor on Nobuaki Miyashita, on kõrgelt hinnatud 2024 auhinna Kuldauhind A' Design Award võitja konkursi kategoorias Arhitektuuri, hoonete ja rajatiste disain.

KuldArhitektuur· 2024

Aida Sekkei Precut Tehas

disainer: Nobuaki Miyashita

Klient: Aida Sekkei Co., Ltd.

Auhind Kuldauhind A' Design Award kategoorias Arhitektuur

150,107

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #160159

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Aida Sekkei Precut Tehas

Aida Sekkei uue tehase projekt keskendub puidu eellõikamisele. Kontseptsioon seisneb arhitektuuri loomisel, mis kehastab puidu töötlemise protsessi. Tehase sees kulgeb ligikaudu 100 meetri pikkune ujuv klaasist ümbritsetud kõnniteekäik, mis võimaldab külastajatel jälgida kogu eellõikamisprotsessi lähivaatusest. Kontorihoone omab suuri ruume kaldservalistest materjalidest valmistatud taladega, mida tavaliselt kasutatakse puitmajade abimaterjalidena. Disain ühendab kõik elemendid näidis-tehase loomiseks, rõhutades nähtavust ja esteetilist atraktiivsust igas aspektis.

Tunnustus

Auhinnast Kuldauhind A' Design Award

Aida Sekkei Precut Tehas on Kuldauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse esmaklassilistele, imelistele ja silmapaistvatele disainidele. Kuldvõitjad on ülimalt uuenduslikud, visioonilised ja glamuurselt pimestavad looming, mis peegeldab oma disainerite geniaalsust, tarkust ja oskusi. Aida Sekkei Precut Tehas peaks olema kõrgelt kiidetud, suundi seadev ja monumentaalne leiutis, mis pakub enneolematut väärtust. See Kuldauhinna A' Design Award võidudisain on suurejooneline, lugupeetud projekt, mis toob suurt kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Aida Sekkei Precut Tehas tekitab intensiivset soovi, äratab kirge, julgustab loovust ja lummab meid.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: This is a project of a new timber processing plant for precut lumber. Its design concept is all about creating an architecture that embodies the series of timber processing. The almost 100-meter-long viewing aisle encased in a random stripe wooden shell is cantilevered and appears as if it floats from the factory building wall. The aim of the impressive façade design with a sense of acceleration and speed is to provoke the image of Aida Sekkei’s further evolution towards the future.
Mõõtmed ja pakend: Site area: 40,023.50 m2
Building area: 14,614.43 m2
Total floor area: 15,206.32 m2

Office Building(2F)
1st floor: 458.21 m2
2nd floor: 429.28 m2
Number of floors: 2 above ground
Height: Maximum height 10.86 m,
Structure: Wooden

Factory Building(2F)
1st floor: 13,886.39 m2
2nd floor: 380.70 m2
Sildid: architecture, factory, wooden, truss, pre-cut, Factory tour, Japan
Tootmistehnoloogia: As for the office, which is the face of the plant, we created one large space by building a scissor truss using members of smaller cross sections (30 mm by 120mm size lumber used as supplementary members such as wall studs of a home). 120mm square Japanese cypress pillars are placed every 303 mm of the wall and to construct load-bearing walls, a 30 mm thick cedar board was inserted between the pillars.
Disainiülesanne: When constructing large-span wooden structures, it's common to use specialized and expensive materials such as large-diameter engineered lumber. However, here, we've achieved a 12-meter span at low cost by combining small-section studs commonly used in typical residential construction to form trusses. This method, the first of its kind in Japan, utilizes these small-section studs (measuring 30×120mm) which are widely used in residential construction.
Uurimistöö: Research Objective: To find a cost-effective method for achieving large spans in wooden structures. Result: The combination of small-section studs into truss structures has enabled the realization of a 12-meter span at low cost. Impact: There is potential for innovative approaches in medium to large-scale wooden construction.
Inspiratsioon: Before initiating this design, visiting an existing pre-cut factory left a profound impression. Witnessing the precise, aesthetically pleasing fabrication of columns and beams at remarkable speed sparked inspiration. To capture the dynamism and speed of fabrication observed in the factory, the design concept emerged: a facade featuring a protruding massive timber symbolizing the factory's essence.
Projekti kestus: This project was completed in September 2020 and is currently in operation. The planned site in Bando City is a place where forest resources are abundant despite being near Tokyo. It is conveniently located as a node of the expressway network in the Tokyo metropolitan area.
Tööprotsess: This is a project of a new timber processing plant for precut lumber designed by Aida Sekkei Co.,Ltd., one of the leading house builders who specializes in traditional Japanese timber construction.
Patendid: None
Piltide autorid: Image #1-#5: Photographer Nobuaki Miyashita, Variations, 2020