Disainilahendus Wedge House Elamu, autor Kiyoshi Sugimoto

Disainilahendus Wedge House Elamu, mille autor on Kiyoshi Sugimoto, on kõrgelt hinnatud 2025 auhinna Pronksauhind A' Design Award võitja konkursi kategoorias Arhitektuuri, hoonete ja rajatiste disain.

PronksArhitektuur· 2025

Wedge House Elamu

disainer: Kiyoshi Sugimoto

Klient: Masato Ikuta

Auhind Pronksauhind A' Design Award kategoorias Arhitektuur

13,244

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #162815

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Wedge House Elamu

Wedge House on kolmekorruseline elamu, mis on ehitatud kitsale ja järsu kaldega kinnistule Jaapanis Ikeda linnas. Kiiluja ristlõige paigutab suurima korruse hoone ülaossa ja väikseima maa-aluse korruse allapoole, nii et vanale tugimüürile ei rakendu täiendavat koormust. Kaks ülemist korrust on ehitatud puidust ning keldrikorrus raudbetoonist. Ida- ja läänepoolsed seinad on viimistletud hõbedase kattega terasplaatidega, mis toetavad konsoolina väljaulatuvat korrust ja raamivad vaadet lõuna suunas. Teisel korrusel asuv elutuba avaneb terrassile, kust avaneb avar vaade.

Tunnustus

Auhinnast Pronksauhind A' Design Award

Wedge House Elamu on Pronksauhinna A' Design Award võitja, väga prestiižikas tunnustus, mis antakse silmapaistvatele disainidele, mida iseloomustavad loovus, leidlikkus ja teravmeelsus. Pronksvõitjad on küllaldaselt osavad ja tabavalt loovad teosed, mis kinnitavad oma disainerite laia kogemust, kujutlusvõimet ja leidlikkust. Wedge House Elamu peaks olema kõrgelt hinnatud, imetletud ja armastatud objekt, mis on märkimisväärselt professionaalne ja uuenduslik. See Pronksauhinna A' Design Award võidudisain ühendab parimaid tavasid kunstis, teaduses, disainis ja tehnoloogias ning on suurepärane oma detailidele pööratud tähelepanu poolest. Wedge House Elamu rahuldab suurepäraselt vajadusi, puudutab soove, võlub tundeid ja pakub huvi uudishimule.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The site has a nice view, but it is narrow and has a steep slope, and due to area regulations, the building coverage ratio is a strict 40%.
In order to meet the required area to comply with strict regulations, we adopted a three-story mixed structure with two floors above ground made of wood and one floor below ground made of reinforced concrete.
The building has a wedge-shaped shape, with the second floor, which has the best view, as the living space and the largest area, and the area decreases as you go to the lower floors to avoid applying force to the retaining wall.
Mõõtmed ja pakend: Total floor area 111.16㎡　Width 5560mm x Depth 11000mm x Height 10190mm
Sildid: Slopingland structure protruding structure wedge Basement mountainside
Tootmistehnoloogia: The east and west walls are finished with silver galvalume steel plates, which support the cantilevered floor that protrudes from the basement, and at the same time serve to frame the view to the south.
The basement is a bedroom with a sense of security that feels like it's nestled on a slope. The first floor has a water area and a study with a view of the greenery of the park behind the deep eaves. From the sky terrace of the LDK on the 2nd floor, you can enjoy a panoramic view of the Osaka plains. This is a house where you can enjoy the three different slopes of Mt. Satsuki.
Disainiülesanne: Stable structural design with an underground shape that does not apply force to old retaining walls on a narrow, steeply sloped site, and a protruding structure for the wooden upper building.
Uurimistöö: Research on stable structures with protruding shapes in wooden buildings
Inspiratsioon: The site is located at the foot of Mt.Satsuki in Ikeda City, Osaka Prefecture, Japan. The site was narrow, and more than half of the site was on a steep slope.
Additionally, the site is located on an old, tall retaining wall, so the building had to be constructed in a way that would not put stress on the retaining wall.
Therefore, the building's cross-sectional shape is wedge-shaped, with the basement being the smallest and increasing as the floors rise.
Projekti kestus: Design for the project began in September 2022 at a site in Ikeda City, Osaka Prefecture, and was completed in June 2024.
Tööprotsess: A basement with a shape that does not apply force to the old retaining wall, and a pop-out floor structure for the upper wooden building to maintain the required area.
Meeskonnaliikmed: KIYOSHI SUGIMOTO
Piltide autorid: All photos and videos Hirofumi Imanishi