Disainilahendus Airboard Triikimislaud, autor Yasemin Ulukan, Senur Design Center

Disainilahendus Airboard Triikimislaud, mille autor on Yasemin Ulukan, Senur Design Center, on kõrgelt hinnatud 2015 auhinna Rauaauhind A' Design Award võitja konkursi kategoorias Kodumasinate disain.

RaudKodumasin· 2015

Airboard Triikimislaud

disainer: Yasemin Ulukan, Senur Design Center

Klient: Arnica

Auhind Rauaauhind A' Design Award kategoorias Kodumasin

44,808

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #38611

Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Airboard Triikimislaud

Väsitavat triikimistööd lihtsustab mitte ainult hea triikraud, vaid ka õige pind, millel triikimine toimub. Integreeritud ventilaator võimaldab kasutajatel valida õhu puhumise ja kangast läbi imemise funktsioonide vahel. Puhkefunktsioon loob kõva pinna ja kangase vahele õhuvahe, mis tagab optimaalse triikimise õrnadele kangastele nagu siid ning toimib suurepäraselt mitmekihiliste rõivastega nagu jakid, jätmata ülemisele kihile märke. Vaakumsüsteem kinnitab rõiva pinna külge, hoides seda pingul, ning imab üleliigse auru keskkonnast.

Tunnustus

Auhinnast Rauaauhind A' Design Award

Airboard Triikimislaud on Rauaauhinna A' Design Award võitja, prestiižikas tunnustus, mis antakse headele disainidele, mis vastavad professionaalsetele ja tööstuslikele nõuetele, mida oodatakse hästi disainitud töödelt. Raudvõitjad näitavad oma loojate suurt oskust, kõrget spetsialiseerumist, asjatundlikku mõistmist ja loomingulist võimekust. Airboard Triikimislaud peaks olema kõrgelt hinnatud, imetletud ja armastatud looming, mis on praktiline ja uuenduslik. See Rauaauhinna A' Design Award võidudisain ühendab tööstuse parimaid tavasid ning tal on pädevad tehnilised omadused, mis on seotud oskusteabe ja andega. Airboard Triikimislaud on austatud oma põhjalikkuse eest ning on loodud pakkuma elukvaliteedi parandusi, mis aitavad teha maailma paremaks paigaks.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: With integrated fan inside, users can choose functions between blowing and vacuuming air through fabric.With blowing function, creating a gap between the hard surface and fabric provides the optimum ironing ability esp on delicate fabrics such as silk and works perfect on multi-layered clothes such as jackets without leaving marks on top layer.Vacuum system sticks the fabric on the surface to keep it stretched and also absorbes the extra steam in the environment .
Mõõtmed ja pakend: Able to be removed of floor easily with a single hand movement, Airboard can be adjusted at a height from 65 cm to 100 cm. The plastic wide iron placement surface containing fireproof silicon strips and made of special thermoplastic material provides both a user-friendly and an extra safe solution. General box dimensions are 50cm x 170 cmx 17cm.
Sildid: ironing board, iron, aircushion system, moisture absorption system, automatic cordwinder
Tootmistehnoloogia: All plastic parts are produced from recyclable thermoplastic materials. The strong foots are produced from aluminium profiles.The flameproof sheath that is elasticated on all sides can easily be fit on the board.The top board is made of 1mm aluminium sheet material.The plastic iron rest place is made of PA%30GF which gives extra strength and heat resistance.
Disainiülesanne: Two important aspects of the design that needed to be accomplished were for the product to stand firm on ground and also to be easily lifted up and down without much effort. This problem was resolved by developing a special mechanism enabling a soft elevation and lowering.For height setting, the aesthetic and functional latches present on both right and left side enables automatic lift off for the ironing board. In fact, this lift off can be enabled by pressing only one of the lifting latches
Uurimistöö: Airboard was developed as a result of several observations made at locations where ironing work is done professionally and continually, iron appliance and surface duo is conceptualized together to present a solution undertaking the tiresome ironing work.Delicate fabrics can never be ironed at home and taken to professionals for ironing. Airboard saves usersfrom the trouble of taking such fabric to dry cleaners over and over again each time and solves the ironing problem at home.
Inspiratsioon: The question “why should there not be professional ironing boards at home as well?”, has designed the Airboard .It is not as simple as buying a very good iron to solve the “ironing problem”. It is also important on which surface the fabric to be ironed will be laid upon during ironing since what makes it easier to iron is not just the iron appliance itself but also the surface whereon the ironing will be made. Thus, the logic is quite straightforward: Correct surface, easy and successful ironing.
Projekti kestus: Has a background more then 10 years of research. The final concept project has started on June 2012 and finalized in December 2014. Will be on markets on the first quarter of 2015.
Tööprotsess: With Airboard, it is possible to select optimum surface for different fabrics ensuring that an optimum outcome can be obtained within shortest time. With a single hand touch, Airboard can be removed from ground and can be adjusted at a height from 65 cm to 100 cm.It is equipped with an integrated plug , 2 meter long cord and automatic cordwinder. Strong aluminum profile footing and slip-proof base ensures Airboard to stand firm on ground.
Meeskonnaliikmed: Senur Design Center