Disainilahendus Gabo Sõrmus, autor Ana Piazza

Disainilahendus Gabo Sõrmus, mille autor on Ana Piazza, on kõrgelt hinnatud 2020 auhinna Hõbeauhind A' Design Award võitja konkursi kategoorias Ehtedisain.

HõbeEhted· 2020

Gabo Sõrmus

disainer: Ana Piazza

Klient: Ana Piazza

Auhind Hõbeauhind A' Design Award kategoorias Ehted

58,060

Kinnitatud auhinna võitja

Kinnita auhinna staatus disainile #92492

Külasta lehte Vaata A' Design Award lehel Pressiteade Auhinna märgis

Värvid

Disain

Teosest Gabo Sõrmus

Gabo sõrmus oli loodud selleks, et julgustada inimesi uuesti mängima mängu mängulist külge, mis tavaliselt kaotatakse täiskasvanu saabudes. Disainerit inspireerisid mälestused, kui ta jälgis oma poega mängimas oma värvika võlukuubikuga. Kasutaja saab rõngaga mängida, pöörates kahte iseseisvat moodulit. Seda tehes saab vääriskivi värvikomplektid või moodulite positsiooni sobitada või sobitada. Lisaks mängulisele aspektile saab kasutaja valida, kas kanda erinevat sõrmust iga päev.

Tunnustus

Auhinnast Hõbeauhind A' Design Award

Gabo Sõrmus on Hõbeauhinna A' Design Award võitja, ülimalt prestiižikas tunnustus, mis antakse tipptasemel, suurepärastele ja muljetavaldavatele disainidele. Hõbevõitjad on ülimalt säravad ja erakordselt loovad tööd, mis illustreerivad oma disainerite silmapaistvat kogemust, annet ja teravmeelsust. Gabo Sõrmus peaks olema imeline, eeskujulik töö, mis on märkimisväärselt professionaalne ja sügavalt uuenduslik. See Hõbeauhinna A' Design Award võidudisain on väga tähelepanuväärne, imetletud leiutis, mis toob kasu ning nihutab kunsti, teaduse, disaini ja tehnoloogia piire. Gabo Sõrmus on laialdaselt kadestatud looming, mis äratab soove, tekitab positiivseid tundeid ning süütab hämmastust ja imestust.

Disaini taustal

Pressimaterjalid

Disaineri esitatud autorid, meeskonnaliikmed ja tehnilised andmed.

Unikaalsed omadused: The Gabo ring encourages the user to play with it by rotating the two modules, the same way it is done with a magic cube. The colors of the gemstones can be lined up to match between the two modules or they can be used mismatched. This matching or mismatching can also be done with the positions of the modules. This way, the user can have different rings everyday by playing with it. The ring conveys a message: bring back the playful side to your life.
Mõõtmed ja pakend: Inner band diameter: 17mm; Band width: 4mm; Modules width with gemstones set: 13mm; Ring total height: 28mm, from bottom of the ring band to top of the cube; Brazilian ring size: 16.
Sildid: jewellery, jewelry, rotating ring, spinner ring, gabo ring, ana piazza, rings, gold, designer jewelry, diamonds
Tootmistehnoloogia: A wax model was printed from the digital 3D model that I drew with CAD and a mold created for casting a silver model. After many prototypes, the ring was casted in gold and polished. The gemstones were set and a pin was inserted into the band and the modules to allow them to rotate. The ring was assembled, the top gold sheet laser welded and the ring was polished again. The casting, assembly, gemstone setting and polishing were done manually. Materials: Metal-18K yellow gold; Brazilian colored gemstones, all square 3mmx3mm- 6 citrines; 6 topazes; 6 green tourmalines, 6 garnets and 12 brilliant cut 1mm-diamonds.
Disainiülesanne: The challenges were to design modules that would not bend over the ring band and to set the colored gemstones very close to each other, with minimal metal appearance between them, in order to resemble a magic cube. Also, the modules had to rotate easily so the user would not have to put any strength. Because of these challenges, I had to make various 3D wax and silver models for testing before casting the final ring in gold.
Uurimistöö: Children usually choose their toys motivated by their colors and the possibility to change or assemble them in different ways. By observing children playing in the playgrounds and my own son play with his magic cube, also known as Rubik Cube, I found myself challenged to create a piece of jewellery that could bring such contentment to adults, with the same elements of colors and movement.
Inspiratsioon: I was inspired by the wish that people experience again the playful side of life. When we are children life is joyful, simple, colorful. We lose all this when we grow up because of the responsibilities that come with adulthood. The magic cube was chosen to represent this wish because of the memories of my son playing with it. He would be so absorbed in the cube movements that nothing disturbed him. Therefore, the Gabo ring is intended to encourage users to find this moment of inner peace by playing with it or simply observing its movements and shape.
Projekti kestus: The project started in November, 2018 in Sao Paulo, Brazil, with the desire to create a ring that the user could play with it, resembling a magic cube, also known as Rubik Cube. After some wax and silver models, and many adjustments, the final model was ready by the middle of August, 2019.
Tööprotsess: The user can interact and play with the ring by rotating the two modules set with colored gemstones. This way, the person can match or mismatch either the gemstone colors set in the top module with the bottom module or the position of the modules. The rotation of the modules gives the nice possibility to the user to have a different ring each time it is used.
Patendid: Copyrights belong to Ana Piazza, 2019
Piltide autorid: Image #1: Photographer Rafael Coelho, Gabo Main, 2019; Image #2: Photographer Rafael Coelho, Gabo 1, 2019; Image #3: Photographer Rafael Coelho, Gabo 2, 2019; Image #4: Photographer Rafael Coelho, Gabo 3, 2019; Image #5: Photographer Rafael Coelho, Gabo 4, 2019.

Video Credits: Videomaker Rafael Coelho, Gabo ring, 2019 and Video Editing Rafael Costa, Gabo ring, 2019.