Jack Forman diseinatzailearen DefeXtiles Ehungintzarako Fabrikazio Teknika

Jack Forman diseinatzailearen DefeXtiles Ehungintzarako Fabrikazio Teknika lana 2021 Zilarrezko Saria A' Design Award sari ospetsuaren irabazle bikaina da Ehungintza, Oihal, Ehundura, Eredu eta Tela Diseinua Lehiaketa Kategorian.

ZilarEhungintza· 2021

DefeXtiles Ehungintzarako Fabrikazio Teknika

diseinatzailea: Jack Forman

Bezeroa: Tangible Media Group, Mit Media Lab

Zilarrezko Saria A' Design Award Irabazlea Ehungintza Kategorian

54,895

Egiaztatutako Sari Irabazlea

#109724 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

DefeXtiles Ehungintzarako Fabrikazio Teknika Diseinuari Buruz

DefeXtiles ehungintzarako fabrikazio teknika bat da, ohiko 3D inprimagailuetan ehun mehe eta malguak sortzen dituena. Metodoak azpi-estrusioa kontrolatzen du, hala nola koska txikiak eratzen dira haien arteko hari finekin. Sortutako aldizkako hutsuneek ehundutako itxura, arnasgarritasuna, malgutasuna eta luzagarritasuna ematen dituzte, azido polilaktikoa bezalako material zurrunekin ere. Ehuna inprimatze-ohearekiko perpendikularki inprimatzen da, beraz, forma tolestuak, kurbatuak eta konplexuak egin daitezke. Aplikazioen artean jantziak, interfaze ukigarriak eta jostailuak daude.

Aintzatespena

Zilarrezko Saria A' Design Award Sariari Buruz

DefeXtiles Ehungintzarako Fabrikazio Teknika Zilarrezko Saria A' Design Award irabazlea da, goi-mailako, zoragarriak eta liluragarriak diren diseinuei ematen zaien ezohiko aitorpen prestijiotsua. Zilar-mailako irabazleak lan oso distiratsuak eta sormen biziko lanak dira, beren diseinatzaileen aditutasun, talentu eta zorroztasun nabarmenak erakusten dituztenak. DefeXtiles Ehungintzarako Fabrikazio Teknika erakusleiho-lan zoragarria, nabarmenki profesionala eta sakonki berritzailea izatea espero da. Zilarrezko Saria A' Design Award irabazi duen diseinu hau asmakizun oso nabarmena eta miretsia da, onura ekartzen duena eta artearen, zientziaren, diseinuaren eta teknologiaren mugak zabaltzen dituena. DefeXtiles Ehungintzarako Fabrikazio Teknika jende askok inbidia duen sorkuntza da, desirak pizten dituena, sentimendu positiboak ekartzen dituena eta harridura eta txunditzea pizten dituena.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Etiketak: textile, 3d print, lace, advanced manufacturing, fabric
Produkzio Teknologia: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Diseinu Erronka: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Ikerketa: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspirazioa: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Proiektuaren Iraupena: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Eragiketa Fluxua: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Taldekideak: Jack Forman
Mustafa Doga Dogan
Hamilton Foryseth
Hiroshi Ishii