Jack Forman diseinatzailearen DefeXtiles Ehungintza Fabrikazio Teknika

Jack Forman diseinatzailearen DefeXtiles Ehungintza Fabrikazio Teknika lana 2021 Brontzezko Saria A' Design Award sari ospetsuaren irabazle bikaina da 3D Inprimatutako Forma eta Produktuen Diseinua Lehiaketa Kategorian.

Brontze3D Inprimatzea· 2021

DefeXtiles Ehungintza Fabrikazio Teknika

diseinatzailea: Jack Forman

Bezeroa: Tangible Media Group, MIT Media Lab

Brontzezko Saria A' Design Award Irabazlea 3D Inprimatzea Kategorian

34,002

Egiaztatutako Sari Irabazlea

#112633 Sariaren Egoera Egiaztatu

Webgunea Bisitatu A' Design Award-en Ikusi Prentsa-oharra Sari-bereizgarria

Koloreak

Diseinua

DefeXtiles Ehungintza Fabrikazio Teknika Diseinuari Buruz

DefeXtiles 3D inprimagailu estandarretan ehun mehe eta malguak sortzeko teknika bat da. Metodo honek gutxi-estrusioa kontrolatzen du, tantatxo txikiak eta haien arteko hari finak sortuz. Aldizkako hutsune horiek ehunari ehun-itxura, iragazkortasuna, malgutasuna eta luzagarritasuna ematen dizkiote, baita azido polilaktikoa bezalako material zurrunekin ere. Ehunak inprimatze-oheren aurka perpendikularki inprimatzen dira, plegatze eta forma kurbatuak sortzea ahalbidetuz. Aplikazioen artean, jantziak, interfaze ukigarriak eta badminton pilotak daude. Filamentu eroaleak zirkuitu-arrastoak txerta ditzake ehunean.

Aintzatespena

Brontzezko Saria A' Design Award Sariari Buruz

DefeXtiles Ehungintza Fabrikazio Teknika Brontzezko Saria A' Design Award irabazlea da, sormenak, asmamenak eta zorroztasunak bereizten dituzten diseinu bikainei ematen zaien aitorpen oso prestijiotsua. Brontze-mailako irabazleak trebetasunez beteriko eta nabarmenki sortzaileak diren artefaktuak dira, beren diseinatzaileen esperientzia zabala, irudimena eta ekimena egiaztatzen dutenak. DefeXtiles Ehungintza Fabrikazio Teknika oso estimatua, miretsia eta maitea den objektua izatea espero da, nabarmenki profesionala eta berritzailea dena. Brontzezko Saria A' Design Award irabazi duen diseinu honek artearen, zientziaren, diseinuaren eta teknologiaren praktika onenak biltzen ditu eta xehetasunei ematen dien arretagatik bikaina da. DefeXtiles Ehungintza Fabrikazio Teknika beharrak bikain asetzen dituen, desirak ukitzen dituen, sentimenduak xarmatzen dituen eta jakin-mina erakartzen duen lana da.

Diseinuaren Atzean

Prentsa-kita

Diseinatzaileak emandako kredituak, taldekideak eta xehetasun teknikoak.

Propietate Bereziak: DefeXtiles is a rapid and low-cost technique to produce realistic high-fidelity textiles on 3D printers. In this work, we demonstrate that under-extrusion defects can be finely controlled to quickly print thin flexible textiles into complex 3D shapes. Our approach enables a myriad of applications including printing full sized garments, deformable tangible interfaces, and ultra-tough shuttlecocks.
Etiketak: textile, 3d print, lace, advanced manufacturing, fabric
Produkzio Teknologia: In this paper, we demonstrate that under-extrusion can be leveraged to quickly print thin, flexible, textiles. Specifically, as the extrusion multiplier decreases, there exists an ideal regime where globs form with fine strands connecting them. The periodic gaps that arise from printing this way not only yields textile-like aesthetics and breathability, but also textile-like properties such as flexibility and stretchability even with classically rigid materials such as polylactic acid (PLA).
Diseinu Erronka: To democratize access and ability to make 3D forms with textiles by developing a new technique that allows textiles to be 3D printed into complex 3-dimensional forms using unmodified commodity 3D printer and no new software.
Ikerketa: We present a new strategy, called DefeXtiles, to 3D print quasi-woven fabrics that are thin, flexible, and fast to fabricate. Since our approach prints the textiles perpendicular to the print bed, complex geometries can be produced including pleated, curved, and metamaterial structures. With our approach, a standard 3D printer can print decameters of fabric in a single print. The use of multi-material printers allows users to embed circuit traces into the textile via conductive filament.
Inspirazioa: For thousands of years, the manufacturing of textiles into shaped forms has remained largely the same; fiber becomes a fabric which is then constructed into a 3D object. The high-tech approach, machine knitting, uses expensive machines with a significant learning curve for use. The low-tech approach, classic sewing, requires painstaking processes. As such, there is a need for a fast and accessible approach to manufacture textiles into 3D forms.
Proiektuaren Iraupena: Started in October 2019 in Cambridge Massachusettes, and finished in June 2020. The work will be presented and demoed at the ACM User Interface Software and Technology Symposium 2020.
Eragiketa Fluxua: This work has introduced a new approach to quickly print thin, flexible textiles composed of common 3D printing ma-terials with an unmodified 3D printer. Our approach com-bines the flexible, thin, and breathable properties of textiles with the affordances of 3D printing: rapid iteration, hands-free fabrication, and computer aided design. Through char-acterization, we demonstrate how our approach enables tun-ing of the mechanical and aesthetic properties through mate-rial and parameter selection. Through a series of applica-tions, we demonstrated the potential applicability of our approach for smart textiles, tangible online shopping, toys, fabric design, and everyday life.
Taldekideak: Jack Forman, Mustafa Doga Dogan, Hamilton Foryseth and Hiroshi Ishii