Arch Cadeira, Cadeira sen respaldo de Edvard Glazebrook

O deseño Arch Cadeira, Cadeira sen respaldo de Edvard Glazebrook é un estimado gañador do moi prestixioso 2021 A' Design Award de Bronce na Categoría de Competición Deseño de Mobiliario.

BronceMobiliario· 2021

Arch Cadeira, Cadeira sen respaldo

de Edvard Glazebrook

Gañador do A' Design Award de Bronce na Categoría Mobiliario

11,198

Gañador de Premio Verificado

Verificar o Estado do Premio para #106853

Ver en A' Design Award Nota de prensa Distintivo do premio

Cores

O Deseño

Sobre Arch Cadeira, Cadeira sen respaldo

Arch é unha cadeira e un asento sen respaldo feitos de madeira de piñeiro laminada, tallada e tinguida de negro. O deseño baséase en formas e figuras simples e repetitivas, que lle dan ao moble unha expresión homoxénea e lóxica. Cinco arcos idénticos forman as patas e o respaldo da cadeira, mentres que o asento sen respaldo está feito de tres medios arcos que se xuntan no centro. Todas as pezas están cortadas dunha placa de madeira laminada cunha fresadora CNC, e logo encoladas e unidas con cavillas de madeira. As curvas reforzan o moble nos seus puntos máis débiles.

O Recoñecemento

Sobre o A' Design Award de Bronce

Arch Cadeira, Cadeira sen respaldo gañou o A' Design Award de Bronce, un recoñecemento altamente prestixioso outorgado a deseños sobresaíntes que se distinguen pola creatividade, o enxeño e a sagacidade. Os gañadores Bronce son artefactos amplamente hábiles e sorprendentemente creativos que autentican a vasta experiencia, imaxinación e enxeño dos seus deseñadores. Espérase que Arch Cadeira, Cadeira sen respaldo sexa un obxecto moi apreciado, admirado e querido, notablemente profesional e innovador. Este deseño gañador do A' Design Award de Bronce incorpora as mellores prácticas da arte, a ciencia, o deseño e a tecnoloxía, e é excelente pola súa atención ao detalle. Arch Cadeira, Cadeira sen respaldo satisfai espléndidamente as necesidades, toca os desexos, encanta os sentimentos e atrae a curiosidade.

Detrás do deseño

Kit de prensa

Créditos, membros do equipo e detalles técnicos proporcionados polo deseñador.

Propiedades Únicas: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimensións e Embalaxe: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Etiquetas: Wood, Chair, Stool, Pine wood, Arches, Curve
Tecnoloxía de Produción: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Reto de Deseño: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Investigación: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Inspiración: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Duración do Proxecto: The project started in march 2020 - and finished in late May 2020.
Fluxo de Operacións: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patentes: Copyrights belong to Edvard Glazebrook, 2020
Membros do Equipo: Edvard Glazebrook