ʻO Pinch Noho na Medium2 Studio he mea lanakila hanohano loa o ka 2023 A' Design Award Kala ma ka Māhele Hoʻokūkū Hoʻolālā Lako Hale.

KalaLako Hale· 2023

Pinch Noho

na Medium2 Studio

Mea Kūʻai: Medium2studio

Mea Lanakila A' Design Award Kala ma ka Māhele Lako Hale

31,178

Mea Lanakila i Hōʻoia ʻIa

Hōʻoia i ke Kūlana Makana no #150476

Kipa i ka Pūnaewele Nānā ma A' Design Award Hoʻolaha Nūhou Hōʻailona Makana

Nā Waihoʻoluʻu

Ka Hoʻolālā

E Pili Ana iā Pinch Noho

ʻO ka Pinch Chair kahi noho ʻokoʻa, hiki ke hoʻopaʻa ʻia, ka noho plastik e noʻonoʻo hou i nā hoʻolālā kuʻuna me kahi nani hou i kūpono i ka hoʻolālā a me nā ʻāina. Hoʻolālā ʻia me ka manaʻo unibody, hoʻololi ka pepa plastik i kahi noho piha me nā neʻe maʻalahi a me ka huki ʻana. ʻO kona hiʻohiʻona paʻa ʻole a hui pū ʻia e hana i kahi kiʻi ʻike intuitive a ikaika. Hiki i ka hoʻolālā ke hoʻopaʻa ʻia i ka wā o ka waiho ʻana a me ka waiho paʻa ʻana ma ka papa ʻaina i ka wā e huli ʻia ai i lalo, kahi kūpono i nā limahana hale ʻaina e hoʻomaʻemaʻe i ka papahele i ka wā e pani ai.

Ka Hoʻomaikai

E Pili Ana i ka A' Design Award Kala

Ua lanakila ka hoʻolālā Pinch Noho i ka A' Design Award Kala, he ʻike hoʻohanohano nui loa i hāʻawi ʻia i nā hoʻolālā kiʻekiʻe loa, nani a kupaianaha. He mau hana ʻālohilohi loa a hana noʻeau nui nā lanakila Kala e hōʻike ana i ka loea, ka makakoho a me ka ʻoi aku o ka noʻonoʻo o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo ka hoʻolālā Pinch Noho he hana kupaianaha, kūlana ʻoi aku, ʻoihana kiʻekiʻe a hou loa. ʻO kēia hoʻolālā i lanakila i ka A' Design Award Kala he mea hoʻokumu kūpono loa, mahalo ʻia e hāʻawi i ka pōmaikaʻi a hoʻoneʻe i nā palena o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana. He mea i ʻeleu ʻia e nā mea he nui ka hoʻolālā Pinch Noho e hoʻāla i ka makemake, lawe mai i nā manaʻo maikaʻi a hoʻāla i ka kamahaʻo a me ka mahalo.

Ma Hope o ka Hoʻolālā

ʻEke Nūhou

Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.

Nā ʻAno Kūʻokoʻa: The Pinch Chair is a modern interpretation of the traditional plastic chair, molded in one piece with a sleek and contemporary design that complements modern architecture and landscapes. It is stackable for easy storage and can be flipped over onto a table to facilitate cleaning of floors by restaurant staff. This creates a seamless and harmonious appearance, with a visually dynamic and intuitive design that is both stylish and practical.
Nā Ana a me ka Hoʻopili: 549 mm x 558 mm x 822 mm
Nā Lepili: stackable chair, plastic chair, pinch chair
ʻEnehana Hana: plastic injection molding
Pilikia Hoʻolālā: Designing a chair that satisfies both practical needs and modern aesthetic while also being stackable and easy to clean the floor, requires finding the perfect balance between form and function, which can be a challenging process.
Noiʻi: Medium2 Studio have observed that many restaurants prefer using plastic chairs for cleaning and maintenance purposes. During our interviews with restaurant owners, Medium2 Studio noticed that they had some common expectations and requirements for plastic chairs. Apart from being stackable for storage convenience, they wanted chairs that could be temporarily lifted off the ground, so that they could clean the floor and put the chairs back without having to clear an entire area of chairs. Finally, they had higher expectations for the design of plastic chairs, hoping that they could enhance or complement the interior decoration of their establishments. Based on these findings, Medium2 Studio have designed the Pinch Chair.
Hoʻoulu Manaʻo: Plastic chairs are a common experience in modern people’s lives. They are also a superb example of the practicality and convenience that industrial production brings.
The Pinch Chair starts with the prototype of the traditional plastic chair, then adds a new form factor to make it a better match for modern architecture and design. The chair was designed using a unibody logic, imagining the plastic sheet transforming into a complete chair with simple pinching and pulling moves.
Ka Lōʻihi o ka Papahana: The project started in January 2021 in Taiwan and finished in May 2021 in taiwan.
Kaʻina Hana: The Pinch Chair design allows for stacking during storage and stable placement on a dining table when flipped upside down, which is convenient for restaurant staff to clean the floor when closing.
Nā Lālā Hui: Ping-Lun Chung
Yen-Ting Lin
Fang-Yu Chen
Nā Kuleana Kiʻi: MEDIUM2 STUDIO INC.