ʻO Vista EY2T Pahu Kiʻi ʻIke Kino Kalaiʻāina Motoʻia na Chris Dopp & Travis Baldwin he mea lanakila hanohano loa o ka 2015 A' Design Award Kala ma ka Māhele Hoʻokūkū Hoʻolālā Huahana Palekana, Maluhia a me Kiaʻi.
KalaHuahana Palekana· 2015
Vista EY2T Pahu Kiʻi ʻIke Kino Kalaiʻāina Motoʻia
na Chris Dopp & Travis Baldwin
Mea Kūʻai: Vista Imaging and Crea Inc Design LTD
Mea Lanakila A' Design Award Kala ma ka Māhele Huahana Palekana
Mea Lanakila i Hōʻoia ʻIa
Hōʻoia i ke Kūlana Makana no #40052Ka Hoʻolālā
E Pili Ana iā Vista EY2T Pahu Kiʻi ʻIke Kino Kalaiʻāina Motoʻia
He Vista EY2T kekahi pahu kiʻi ʻike kino kalaiʻāina motoʻia no ka ʻike ʻōnaehana maka a me ka helehelena. Ke nānā aku nei ka mīkini i ke kahua ʻike no nā helehelena, a laila hoʻohuli nā mōkā i ka pahu kiʻi e kuhikuhi pono i nā maka. Ma muli o ka laulā o nā kukui LED ʻinepalaʻekala a me kahi ʻōnaehana kālele ponoʻī, hiki ke hopu kiʻi ma ka mamao o 3 a hiki i 6 kapuaʻi, no laila ʻaʻole pono ke kuhikuhi lima. Hoʻohuiʻia nā mea ʻike ʻeiwa ma mua i hoʻokahi helehelena ʻeleʻele, a ʻo ke ʻano silinika like me ka lāʻau lāʻau me nā welau poepoe ke hana i kahi kino mālie a hoʻohaʻahaʻa ʻole. Hiki ke hoʻohana ʻia ka pahu kiʻi ma kona ʻano kūʻokoʻa a i ʻole me ka kau paia.
Ka Hoʻomaikai
E Pili Ana i ka A' Design Award Kala
Ua lanakila ka hoʻolālā Vista EY2T Pahu Kiʻi ʻIke Kino Kalaiʻāina Motoʻia i ka A' Design Award Kala, he ʻike hoʻohanohano nui loa i hāʻawi ʻia i nā hoʻolālā kiʻekiʻe loa, nani a kupaianaha. He mau hana ʻālohilohi loa a hana noʻeau nui nā lanakila Kala e hōʻike ana i ka loea, ka makakoho a me ka ʻoi aku o ka noʻonoʻo o kā lākou poʻe hoʻolālā. Manaʻo ʻia ʻo ka hoʻolālā Vista EY2T Pahu Kiʻi ʻIke Kino Kalaiʻāina Motoʻia he hana kupaianaha, kūlana ʻoi aku, ʻoihana kiʻekiʻe a hou loa. ʻO kēia hoʻolālā i lanakila i ka A' Design Award Kala he mea hoʻokumu kūpono loa, mahalo ʻia e hāʻawi i ka pōmaikaʻi a hoʻoneʻe i nā palena o ka hana noʻeau, ka ʻepekema, ka hoʻolālā a me ka ʻenehana. He mea i ʻeleu ʻia e nā mea he nui ka hoʻolālā Vista EY2T Pahu Kiʻi ʻIke Kino Kalaiʻāina Motoʻia e hoʻāla i ka makemake, lawe mai i nā manaʻo maikaʻi a hoʻāla i ka kamahaʻo a me ka mahalo.
Ma Hope o ka Hoʻolālā
ʻEke Nūhou
Nā hōʻoia, nā lālā hui a me nā kikoʻī ʻenehana i hāʻawi ʻia e ka mea hoʻolālā.
- Nā ʻAno Kūʻokoʻa
- The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
- Nā Ana a me ka Hoʻopili
- The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm. - Nā Lepili
- Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
- ʻEnehana Hana
- The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
- Pilikia Hoʻolālā
- The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
- Noiʻi
- Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
- Hoʻoulu Manaʻo
- Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
- Ka Lōʻihi o ka Papahana
- The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
- Kaʻina Hana
- When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture. - Nā Lālā Hui
- Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin - Nā Kuleana Kiʻi
- Image #1: Photographer Travis Baldwin / In Office / 2015
Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015
Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015
Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015
Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015
Kākoʻo ʻIa
ʻImi ma ʻō aku o Designers.org
E ʻimi i nā huahana, nā lawelawe a me nā manawa mai kā mākou mau hoa hoʻolaha.
Hou Aku e ʻImi Ai
Nā Hoʻolālā Pili
E ʻimi i nā hoʻolālā lanakila hou mai ka māhele like, i koho ʻia ma ka waiwai.
