העיצוב Hexa תאורה מאת Sepehr Mehrdadfar הוא זוכה נחשב מאוד של פרס הכסף של A' Design Award 2023 היוקרתי בקטגוריית התחרות עיצוב מוצרי תאורה וגופי תאורה.

כסףתאורה· 2023

Hexa תאורה

מאת Sepehr Mehrdadfar

לקוח: Hamoun Design and Idea

זוכה פרס הכסף של A' Design Award בקטגוריית תאורה

45,061

זוכה פרס מאומת

אימות סטטוס פרס עבור #148179

צפייה ב-A' Design Award הודעה לעיתונות תג פרס

צבעים

העיצוב

אודות Hexa תאורה

מטרת עיצוב Hexa הייתה להשיג מנורה המספקת תאורה למרחב האדריכלי בשני מצבים - רחב וממוקד, בעלת יכולת להתרחב במרחב ומשפרת את איכות המרחב מבחינה אסתטית. Hexa מהווה שליש ממשושה שלם. חלוקה זו מגבירה את יכולת ה-Hexa במגוון הקומפוזיציות ובהתרחבות. צורת העיצוב עוקבת אחר תבנית גיאומטרית בהשראת "גיריה" ו"מיניאטורה" מהאדריכלות המסורתית האיראנית.

ההוקרה

אודות פרס הכסף של A' Design Award

העיצוב Hexa תאורה זכה בפרס הכסף של A' Design Award, הכרה יוקרתית ביותר הניתנת לעיצובים ברמה הגבוהה ביותר, מרהיבים ומרשימים. זוכי הכסף הם יצירות מבריקות להפליא ויצירתיות מאוד שממחישות את המומחיות, הכישרון והחדות של מעצביהן. מהעיצוב Hexa תאורה מצפים שיהיה יצירה נפלאה, דגם מופת, מקצועית להפליא וחדשנית לעומק. העיצוב הזה שזכה בפרס הכסף של A' Design Award הוא המצאה בולטת מאוד ומוערצת שמועילה ודוחפת קדימה את גבולות האמנות, המדע, העיצוב והטכנולוגיה. העיצוב Hexa תאורה הוא יצירה שרבים מקנאים בה, שמעוררת רצונות, מביאה רגשות חיוביים ומציתה התפעלות ופליאה.

מאחורי העיצוב

ערכה לעיתונות

קרדיטים, חברי צוות ופרטים טכניים שסופקו על ידי המעצב.

תכונות ייחודיות: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A Hexa is one third of a full hexagon. This division increases the ability of Hexa in the variety of composition and expansion.
מידות ואריזה: Length of each module: 770 mm
height of profile: 40 mm
width of profile: 20 mm
תגיות: Geometry, Persian Miniature, Muqarnas, Texture, Wide lighting,Geometric expansion, Dynamics and movement, Simple connections
טכנולוגיית ייצור: Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
אתגר עיצובי: It was important to choose the appropriate geometric shape as the initial model. Odd polygons do not extend in a straight line, but even polygons do. In the end, a hexagon was chosen because it formed a more complex structure than a quadrilateral and simpler than a higher degree pair of polygons.
מחקר: The goal of Hexa design was to achieve a lamp that provides the lighting of the architectural space in two broad and localized modes, has the ability to expand in the space and improves the quality of the space in terms of aesthetics. A hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.

The form of this work follows a geometric pattern that is inspired by "knotting" and "miniature" in traditional Iranian architectural decorations.
To achieve this form, all kinds of geometric shapes such as regular, irregular, odd and even polygons were tested, and in this process "hexagon" was chosen as the primary model because:
Due to the type of internal angles, the shapes with odd sides were oriented in geometric expansion and had less compatibility with general architectural plans, so their use in internal architecture required more and more complex control.
- The hexagonal pattern, when expanded, creates a far more "eye-catching" context than the quadrilateral and "simpler" than the higher degrees of the polygons.
In the next step, the hexagonal pattern was divided into smaller parts, and at the end, a line segment with a curve corresponding to the internal angle of the hexagon was selected as the main module of the design. In fact, a hexa is one third of a full hexagon. This division increases the ability of hexa in the variety of composition and expansion.
Each module is made of an extruded aluminum profile in a U shape, which is rolled at an angle of 120 degrees, and the LED is placed inside, and the opening of the U is closed with a Plexiglas sheet (as a diffuser). At specific points of each module, pieces of magnets are installed that enable connecting the modules to the fixture (an iron cube that houses the electric wires and is connected to the ceiling structure). After connecting, the electric wires enter each module from inside the fixture, and the electric current reaches the internal lamp. Hexa has the ability to be installed and connected in three modes: surface, built-in and hanging due to the main fixture.
The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble", "move and replace" and finally, the user can easily control the light network.
השראה: The form of this design follows a geometric pattern that is inspired by "Girih" and "miniature" in traditional Iranian architectural decorations.
Girih ( "knot", also written gereh) are decorative Islamic geometric patterns used in architecture and handicraft objects, consisting of angled lines that form an interlaced strapwork pattern.
משך הפרויקט: This project designed in 2022 in Tehran, Iran.
תהליך הפעולה: The coexistence of modules produces a light and geometric network that increases the charisma of the architectural space. This light grid maintains its character independent of the space while providing ambient lighting and creates a decorative effect for the interior designer.
The hexagonal pattern and the geometric expansion system of this scheme provide the designer with the possibility of controlling the direction of expansion and the density of the composition. Also, due to the linear shape of each module, empty spaces have been created between the lights, which will make the lighting network transparent, so the architect or interior designer will not lose the ceiling cover when using this light.
The magnetic connection of the modules makes it easy to "assemble", "disassemble",
"move and replace" and finally, the user can easily control the light network.
קרדיטים לתמונות: saeed MirTahmasb
maryam saeedpoor