דלג לתוכן
Dond שולחן נמוך מאת Jinyang Koo

העיצוב Dond שולחן נמוך מאת Jinyang Koo הוא זוכה נחשב מאוד של פרס הארד של A' Design Award 2020 היוקרתי בקטגוריית התחרות עיצוב רהיטים.


ארדרהיטים· 2020

Dond שולחן נמוך

מאת Jinyang Koo

לקוח: Wuui

זוכה פרס הארד של A' Design Award בקטגוריית רהיטים

17,948

צבעים

העיצוב

אודות Dond שולחן נמוך

הנרטיב העיצובי של דונד הוא פשטות ועם זאת רב-תכליתית. חלקים פשוטים של המפרקים יוצרים באמצעות מדפסת תלת מימדית, ועיצוב חלקים מינימלי על מנת שהצרכן יוכל להרכיב את השולחן או להרכיב אותו להמשיך במהלך ההובלה. מטרת המעצב הייתה שדונד ייקח חלק בצרכי הצרכנים היומיומיים כדי ליהנות מאורח חיים קל יותר לכל אירוע בפנים ובחוץ. דונד משתמש בגישה עיצובית פשוטה כמו המשטח העליון אינו מחובר לרגליים ומוסר בקלות לשימוש כמגש.

ההוקרה

אודות פרס הארד של A' Design Award

העיצוב Dond שולחן נמוך זכה בפרס הארד של A' Design Award, הכרה יוקרתית מאוד הניתנת לעיצובים בולטים שמצטיינים ביצירתיות, בתושייה ובחוכמה. זוכי הארד הם חפצים מיומנים לרוב ויצירתיים באופן בולט שמעידים על הניסיון הרב, הדמיון והתבונה של מעצביהם. מהעיצוב Dond שולחן נמוך מצפים שיהיה חפץ מוערך מאוד, מוערץ ואהוב, מקצועי וחדשני בצורה בולטת. העיצוב הזה שזכה בפרס הארד של A' Design Award משלב את השיטות הטובות ביותר באמנות, במדע, בעיצוב ובטכנולוגיה, ומצוין בתשומת הלב שלו לפרטים. העיצוב Dond שולחן נמוך מספק להפליא צרכים, נוגע ברצונות, מקסים רגשות ומושך סקרנות.

מאחורי העיצוב

ערכה לעיתונות

קרדיטים, חברי צוות ופרטים טכניים שסופקו על ידי המעצב.

תכונות ייחודיות
Dond is a small and yet versatile low table. In order to apply a simple assembly method, A joint part is designed so that it can be easily assembled. The joint parts is made by 3D printer. The results from our experiment shows that the intensity of Dond can be increased by using three joint parts or more.The board surface of Dond is not attached with the parts below, therefore, the board is a multipurpose tool for our daily life. Eg. Tray
מידות ואריזה
Top: 330mmx330mmx15mm
Overall Height: 415mm
תגיות
Low table, Table, Future technology, Japanese, Minimal, Joint, DIY, Portable
טכנולוגיית ייצור
The joint parts is made by 3D printing technology while the table top and bottom are hand made. Japanese Sugi (cedar wood) is used as the main material for the parts of Dond.
אתגר עיצובי
Although 3D printing technology and wooden crafting can be fused seamlessly, but we are not sure about the sustainability of the combination during our research process. However the issue has been solved by conducting different experiments like attempting on different measurements of the parts.
מחקר
During the research stage, multiple test conducted to check against Dond's durability and sustainability ensuring the design maintain lightweight and versatile. Different 3D materials was use including thickness measure for the jointing during this stage to successfully pass the test. Several collisions occurred during this stage resulted the designer to have selected Resins as the main material for the jointing part for Dond. Multiple test combination of size, material, wood thickness and weight measure has allowed the designer to accomplished and present the final stage of Dond.
השראה
The design inspiration of Dond comes from the frustration of bringing a huge table out for picnic or any outdoor occasions. The designer wanted to design a low table that can be easily assembled and has a high space efficiency.
משך הפרויקט
The project was started and finished on October 2017 in Osaka and exhibited at "Composition 2017".
תהליך הפעולה
Dond can be easily assembled by attaching the legs to the main pole via the joint parts while the table top can be placed on top of it. The amount of table legs can be increased for stability by just simply adding more joint parts to the pole, and the table top can be removed anytime for other purpose.

Dond is designed to be light and handy. It could be easily disassembled for transportation and assemble for usage in any occasions. The minimalism approach of Dond allows it to fit in any location.
חברי צוות
JINYANG KOO

ממומן

גלו מעבר ל-Designers.org

גלו מוצרים, שירותים והזדמנויות מהשותפים הפרסומיים שלנו.

עיצוב טוב ראוי להכרה גדולה

פרס העיצוב A' הוא פרס בינלאומי ושיפוטי לעיצוב טוב. השתתפו בפרס העיצוב A' כדי לקבל הזדמנות לזכות בהכרה מריטוקרטית, לצבור תהילה, יוקרה ופרסום לעבודתכם. הגישו מועמדות לפרס העיצוב A' והתחרו על פרס העיצוב A' היוקרתי.

הגישו מועמדות