Dizajn Bend Stolić Za Kavu čiji je autor Jan Goderis iznimno je cijenjeni dobitnik prestižne nagrade 2023 Brončana nagrada A' Design Award u natjecateljskoj kategoriji Dizajn Namještaja.
BroncaNamještaj· 2023
Bend Stolić Za Kavu
autor/ica Jan Goderis
Dobitnik nagrade Brončana nagrada A' Design Award u kategoriji Namještaj
Potvrđeni dobitnik nagrade
Provjerite status nagrade za #148865Dizajn
O dizajnu Bend Stolić Za Kavu
Stol je izrađen od dvije savijene aluminijske ploče koje se međusobno uklapaju. Kada se sastave, tanjuri se protežu sve do nogu. To daje određenu transparentnost i lakoću dizajnu, a stvoreno je okomito skladištenje časopisa, novina i kariranog materijala. Između dvije gornje ploče također postoji mogućnost odlaganja s obje strane stola.
Priznanje
O nagradi Brončana nagrada A' Design Award
Bend Stolić Za Kavu je pobjednik Brončane nagrade A' Design Award, visoko prestižnog priznanja koje se dodjeljuje izvanrednim dizajnima što se odlikuju kreativnošću, domišljatošću i oštroumnošću. Brončani pobjednici izdašno su vješti i upečatljivo kreativni artefakti koji potvrđuju golemo iskustvo, maštu i snalažljivost svojih dizajnera. Očekuje se da Bend Stolić Za Kavu bude visoko cijenjen, voljen i njegovan predmet koji je izuzetno profesionalan i inovativan. Ovaj dizajn koji je osvojio Brončanu nagradu A' Design Award uključuje najbolje prakse u umjetnosti, znanosti, dizajnu i tehnologiji i izvrstan je zbog pažnje posvećene detaljima. Bend Stolić Za Kavu sjajno zadovoljava potrebe, dotiče želje, očarava osjećaje i privlači znatiželju.
Iza dizajna
Komplet za medije
Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.
- Jedinstvena svojstva
- The table is made of two bent aluminium plates which fit together. When put together, the plates extend all the way to the legs. This gives a certain transparency and lightness to the design and vertical storage is created for magazines, newspapers, and plaid... In between the two top plates, there is also the possibility of storage on both sides of the table.
- Dimenzije i pakiranje
- Dimensions: 125 x 55 x 28 cm
- Oznake
- coffee table, folded table, ecological design, functional design, minimal design
- Proizvodna tehnologija
- Made of 2 parts pleated aluminum sheets (lower and upper parts) finished with a more environmentally friendly lacquering process. Oak wood slats to join the 2 aluminum plates together.
- Dizajnerski izazov
- The design started in 2017. It consisted only of 1 pleated non-continuous line with only the pleated legs and the laying surface. To prevent the folding of the laying surface under load, reinforcement surfaces were provided at the bottom and between the supports, but they were very distracting. It wasn't until 2022 that the idea of using a continuous pleated line with a continuous top surface between which invisible wooden beams could be provided for strength and to invisibly connect the bottom and top. Using a continuous line only made the design more visually logical and aesthetic.
- Istraživanje
- The basis of the design is a smooth continuous line. When folding certain parts, cracks appeared. This was solved by choosing a different aluminium alloy and heating it when folding. It also sought to split the table into two parts so that it could be easily assembled and transportable. By making a separate top and bottom top, with a connection joint on the sides, and fitting together with invisible pins. For the top, two wooden beams are glued in the middle. Both parts are invisibly connected at the bottom with a few screws.
- Inspiracija
- The inspiration was very basic. From the idea of creating a flowing 2-dimensional line design to a 3-dimensional table that can be made out of 1 sheet, metal or wood. And where the shape of the line can incorporate the essential elements for a coffee table, namely an outlet, supports (legs) and storage without becoming banal. Translated from an ordinary continuous line. The fluid continuous line gives a sculptural aspect to the table, which is in dialogue with its surrounding and user.
- Trajanje projekta
- The design started in 2017 and finalized in 2022. Both in Ghent, Belgium.
- Tijek rada
- The pleated plate provides continuous support for the table and also provides storage in the legs and the space between the bottom and top.
- Patenti
- e-depot: 000595853
- Članovi tima
- Jan Goderis
- Zasluge za fotografije
- #1 photographer Jan Goderis, 2022
#2 photographer Jan Goderis, 2022
#3 photographer Jan Goderis, 2022
#4 photographer Sonny Plasschaert, 2022
#5 photographer Jan Goderis, 2022
Sponzorirano
Istražite izvan Designers.org
Otkrijte proizvode, usluge i prilike naših oglašivačkih partnera.
Istražite više
Srodni dizajni
Istražite više nagrađivanih dizajna iz iste kategorije, odabranih prema zaslugama.
