Fortex Radna čizma – dizajner Vincent Blais

Dizajn Fortex Radna čizma čiji je autor Vincent Blais iznimno je cijenjeni dobitnik prestižne nagrade 2026 Srebrna nagrada A' Design Award u natjecateljskoj kategoriji Sigurnosna Odjeća i Osobna Zaštitna Oprema.

SrebroZaštitna Oprema· 2026

Fortex Radna čizma

autor/ica Vincent Blais

Klijent: Royer

Dobitnik nagrade Srebrna nagrada A' Design Award u kategoriji Zaštitna Oprema

21,380

Potvrđeni dobitnik nagrade

Provjerite status nagrade za #182037

Posjetite stranicu Pogledajte na A' Design Award Priopćenje za medije Značka nagrade

Boje

Dizajn

O dizajnu Fortex Radna čizma

Fortex je vodootporna zaštitna čizma projektirana za visokorizična industrijska okruženja koja uključuju izloženost kemikalijama, opasnosti od udaraca i mehaničko naprezanje. Njezina inovacija je proces kemijskog suoblikovanja koji spaja komponente od termoplastičnog poliuretana s injektiranom poliuretanskom bazom, tvoreći jedinstvenu strukturu bez ljepila. Integrirani elementi uključuju štitnik za metatarzalnu regiju, bočnu zaštitu gležnja i ojačani zadnji dio pete. Dizajn pruža otpornost na vodu, kemikalije, ugljikovodike, probijanje i klizanje, dok istovremeno ostaje lagan, ergonomski i toplinski učinkovit.

Priznanje

O nagradi Srebrna nagrada A' Design Award

Fortex Radna čizma je pobjednik Srebrne nagrade A' Design Award, izuzetno prestižnog priznanja koje se dodjeljuje vrhunskim, veličanstvenim i dojmljivim dizajnima. Srebrni pobjednici iznimno su briljantna i vrlo kreativna djela koja ilustriraju izuzetnu stručnost, talent i oštroumnost svojih dizajnera. Očekuje se da Fortex Radna čizma bude divno, reprezentativno djelo koje je izuzetno profesionalno i duboko inovativno. Ovaj dizajn koji je osvojio Srebrnu nagradu A' Design Award vrlo je zapažen, nadaleko cijenjen izum koji koristi i pomiče granice umjetnosti, znanosti, dizajna i tehnologije. Fortex Radna čizma je kreacija kojoj se mnogi dive i zavide, koja budi želje, donosi pozitivne osjećaje i raspiruje čuđenje i divljenje.

Iza dizajna

Komplet za medije

Zasluge, članovi tima i tehnički detalji koje je dostavio dizajner.

Jedinstvena svojstva: Engineered to redefine industrial performance, this boot features a quad-density co-injection system fusing PU and TPU into one seamless chassis. Anatomically mapped zones deliver lightweight shock absorption and targeted protection at key impact areas. A rigid heel stabilizes the foot on uneven terrain, while specialized outsoles ensure grip in extreme conditions. Cement-free bonding forms a waterproof, monolithic structure built for lasting durability and safety.
Dimenzije i pakiranje: Product Dimensions (1 boot, size 42): 310 mm x 120 mm x 400 mm (height)
Package: 510 mm x 355 mm x 140 mm
Oznake: Co-injected Footwear, TPU Reinforcement, Polyurethane Safety Boot, Cold Weather Protection, Ankle protection, Metatarsal Protection, Industrial Design, Injection Molding Innovation, Chemical Bonding, Work Boot
Proizvodna tehnologija: This safety boot is engineered through co-injection molding, chemically bonding high-density TPU reinforcement with a lightweight PU core to form a seamless, monolithic structure free from adhesives and delamination. Developed for sub-zero climates, the TPU formulation maintains elasticity at -40°C, ensuring impact resistance without brittleness. Precision tooling guarantees exact reinforcement placement, delivering targeted protection, thermal stability, and durability without added bulk.
Dizajnerski izazov: The principal challenge was achieving reliable co-molding between TPU and a PU base, ensuring sufficient bonding strength in the metatarsal insert located within the boot’s primary flex zone. This required rethinking rotary-injection machine & tooling: a system allowing a pre-molded TPU insert to seat in an articulated receiver moving in frontal-transverse planes before mold closure and PU injection. Constraints included production feasibility, material behavior, wearer comfort and international safety standard requirements.
Istraživanje: This applied industrial research explored polymer chemistry and precision engineering to eliminate adhesion failure and cold embrittlement in safety footwear. Using iterative prototyping and destructive testing, high-density TPU was co-injected with a cellular PU core to form a monolithic structure. Hundreds of bonding and sub-zero wear tests led to a cement-free boot with permanent molecular fusion, zero delamination, and full CSA, ASTM, and EN/ISO compliance.
Inspiracija: This project merges heritage craftsmanship with advanced material science, transforming traditional footwear into an integrated high-performance system with protection embedded in its structural DNA. Inspired by biological exoskeletons, it acts as both protective shell and load-bearing frame. Rib-cage inspired arch geometry in the metatarsal zone disperses impact while preserving flexibility, creating a biomimetic system balancing safety and ergonomic performance.
Trajanje projekta: Designing started in Sherbrooke, Quebec, Canada in Dec. 2023. Engineering started in Legnaro, Padova, Italy in September 2024 with GGS, an elite Italian mold-making partner lead by M. Roberto Gobbato.
Tijek rada: This safety boot functions as a flexible exoskeleton, flexing at the forefoot while stabilizing the heel. TPU reinforcements shield the metatarsal area and ankle from impact without limiting movement. Unlike cemented footwear, its PU and TPU components are co-injected and chemically fused into a single monolithic structure, eliminating delamination. Built for harsh industrial and cold environments, it delivers long-term durability, reliability, and consistent performance.
Patenti: Protective Toecap & Puncture-resistant Sole
(CSA Z195-14) Certified grade 1 protective toecap that withstands impacts up to 125 joules and certified puncture-resistant sole that withstands at least 1200 Newtons (270pounds)

Electric-shock Protection
(CSA Z195-14) Certified electric-shock protection (18 kV / 60 Hz / 1 minute)

Metatarsal Protection
(CSA Z195-14) Certified metatarsal protection that can withstand impacts up to 101.7 joules

Protective Toecap Impact and Compression Resistance
(ASTM F2413-24) Certified protective toecap that can withstand an impact of 75 ft-lbf (~100 Nm) and a compression of 2500lbs (~1135KG).

Puncture-resistant Sole
(ASTM F2413-24) Certified puncture-resistant sole that can withstand a force load of 270 lbf (1200 N)

Metatarsal Protection
(ASTM F2413-24) Certified metatarsal protection that can withstand an impact of 75 ft-lbf (~100 Nm)

Electric Hazard Protection
(ASTM F2413-24) Certified electric-shock protection (18 kV/ 60 Hz / 1 minute)

Slip Resistant Sole
(ASTM F2413-24) Certified slip-resistant footwear with a coefficient of friction (CoF) of no less than 0.40 on dry and wet quarry tile
Članovi tima: Footwear Developer/Designer: Vincent Blais
Design Associate: Loïc Girard
Executive Director - Innovation: Francis Lacroix

DEVELOPING PARTNERS:
Equipment and Testing: Felice Scarnera & Benedetto Scarnera from SFB Srl (Italy)
Master Moldmaker: Roberto Gobbato – GGS (Italy)
Material and Chemistry: ELACHEM (Italy)
Int'l team coordinator: Alexandra Dombrovska (Italy)