Arch Chèz, Chèz San Do pa Edvard Glazebrook

Dizayn Arch Chèz, Chèz San Do pa Edvard Glazebrook se yon gayan ki gen anpil estim nan konpetisyon trè prestijye 2021 A' Design Award Bwonz nan Kategori Konpetisyon Dezayn Mèb.

BwonzMèb· 2021

Arch Chèz, Chèz San Do

pa Edvard Glazebrook

Gayan A' Design Award Bwonz nan Kategori Mèb

11,198

Gayan Pri Verifye

Verifye Estati Pri pou #106853

Gade sou A' Design Award Kominike Laprès Badj Prim

Koulè

Konsepsyon an

Konsènan Arch Chèz, Chèz San Do

Arch se yon chèz ak yon chèz san do ki fèt ak bwa pin lamine ki taye epi tenn nan koulè nwa. Konsepsyon an baze sou fòm ak fòm senp ak repetitif, ki bay mèb la yon ekspresyon omojèn ak lojik. Senk vout idantik fòme pye yo ak do chèz la, pandan ke chèz san do a fèt ak twa demi-vout ki rankontre nan mitan an. Tout pyès yo koupe soti nan yon plak bwa lamine avèk yon routeur CNC, apre sa yo kole epi jwenn ansanm ak chevij an bwa. Kèb yo ranfòse mèb la nan pwen ki pi fèb li yo.

Rekonesans lan

Konsènan A' Design Award Bwonz

Arch Chèz, Chèz San Do se yon ganyan A' Design Award Bwonz, yon rekonesans ki gen anpil prestij yo bay design ekselan ki make pa kreyativite, enjenyozite ak finès. Ganyan Bwonz yo se objè ki abil anpil e ki kreyatif nan fason ki frape, ki otantifye gwo eksperyans, imajinasyon ak debouyaj designer yo. Yo atann Arch Chèz, Chèz San Do pou se yon objè anpil moun estime, admire e renmen, ki pwofesyonèl e inovatè nan fason remakab. Design sa a ki ganyen A' Design Award Bwonz enkòpore pi bon pratik nan atizay, syans, design ak teknoloji, e li ekselan pou atansyon li bay detay. Arch Chèz, Chèz San Do satisfè bezwen yon fason espledid, li touche dezi, li chame santiman e li atire kiryozite.

Dèyè Konsepsyon an

Dosye Laprès

Kredi, manm ekip ak detay teknik konseptè a bay.

Pwopriyete Inik: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Dimansyon & Anbalaj: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Etikèt: Wood, Chair, Stool, Pine wood, Arches, Curve
Teknoloji Pwodiksyon: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Defi Dizayn: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Rechèch: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Enspirasyon: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Dire Pwojè: The project started in march 2020 - and finished in late May 2020.
Fliks Operasyon: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patant: Copyrights belong to Edvard Glazebrook, 2020
Manm Ekip: Edvard Glazebrook