Arch Oche, Oche Enweghị Azụ nke Edvard Glazebrook

Ihe emepụtara bụ Arch Oche, Oche Enweghị Azụ nke Edvard Glazebrook bụ onye meriri a na-asọpụrụ nke ukwuu nke 2021 Ihe Nrite A' Design Award nke Bronz na Udi Asọmpi Nhazi Ngwá Ụlọ.

BronzNgwá Ụlọ· 2021

Arch Oche, Oche Enweghị Azụ

nke Edvard Glazebrook

Onye Meriri Ihe Nrite A' Design Award nke Bronz na Udi Ngwá Ụlọ

11,198

Onye Meriri Onyinye A Kwadoro

Nyochaa Ọnọdụ Onyinye maka #106853

Lee na A' Design Award Akụkọ Mgbasa Ozi Akara Onyinye

Agba

Nhazi a

Maka Arch Oche, Oche Enweghị Azụ

Arch bụ oche na oche enweghị azụ nke e ji osisi pine e wara awa ma sie ojii site n'usoro e jikọtara ejikọta (laminated) mee. Nhazi a dabere n'usoro na ihe ndị dị mfe na ndị a na-emeghachi ọtụtụ oge, nke na-enye ngwongwo ụlọ ahụ ọdịdị kwụ otu ma nwee ezi uche. Ọtọ ọnwa ise yiri onwe ha na-emepụta ụkwụ na azụ oche ahụ, ebe oche enweghị azụ ahụ bụ ihe e ji ọkara ọnwa atọ mee, nke na-ezukọta n'etiti. A na-eji igwe CNC router bee akụkụ niile site n'efere osisi ejikọtara ejikọta, e mesịa jiri agba jikọta ha ma jiri mkpịsị osisi jikọta ha. Ntudu ndị a na-emesi ngwongwo ụlọ ahụ ike n'ebe ndị dị ya mfe ka ọ daa.

Nkwanye Ugwu

Maka Ihe Nrite A' Design Award nke Bronz

Arch Oche, Oche Enweghị Azụ meriri A' Design Award nke Bronz, nnabata dị oke ugwu e nyere design ndị pụtara ìhè nke a ma ama maka nzụlite ihe, ọgụgụ isi na nghọta. Ndị meriri na Bronz bụ ihe e mere nke ndị nwere nka nke ukwuu ma dị mma n'imepụta nke na-egosi ahụmahụ buru ibu, echiche na ọgụgụ isi nke ndị designer ha. A na-atụ anya na Arch Oche, Oche Enweghị Azụ ga-abụ ihe a na-asọpụrụ nke ukwuu, a na-eto na a hụrụ n'anya, nke dị oke ọrụ ma dị ọhụrụ. Design a meriri A' Design Award nke Bronz na-agụnye ụzọ kacha mma n'ime nka, sayensị, design na teknụzụ, ma dị mma nke ukwuu maka nlebara anya ya n'obere ihe. Arch Oche, Oche Enweghị Azụ na-emezu mkpa nke ọma, na-emetụ ọchịchọ aka, na-adọrọ mmetụta obi ma na-adọta ọchịchọ ịmara.

N'azụ Nhazi a

Ngwugwu Mgbasa Ozi

Nkwurịta okwu, ndị otu na nkọwa teknụzụ nke onye nhazi nyere.

Àgwà Pụrụ Iche: Chair and stool made out of carved and black stained laminated pine wood. The design is based on simple and repetitive forms, rules and shapes that gives the furniture a simple, homogenous and logic expression. Five identical arches create the legs and backrest of the chair, while a stool is made by three half arches that connect in the center.
Nha & Mkpuchi: All parts are made from a laminated wooden plate, 26mm thick.
Chair:
Wooden legs = 40mm thick
Total height = 860mm
Width = 420 x 420mm
Seat height = 456mm

Stool height = 426mm
Leg width = 40mm
Seat diameter: 318mm (carved from the backrest of the chair)
Mkpado: Wood, Chair, Stool, Pine wood, Arches, Curve
Teknụzụ Mmepụta: Laminated pine wood, carved with a CNC router, glued together and stained black. The chair backrest is reinforced with a wooden piece along the top, laid with opposite fiber direction. The curves of the chair strengthen the chair at its most fragile points. The pieces of the chair and stool are connected with wooden dowels and glue.
Ịma Aka Imepụta: To find the correct proportions, fitting within the size of the laminated wooden board, and at the same time creating interesting shapes that look well from all sides. The use of only 90 degree connections, has made it extra important to find the correct sizes. It has also been a challenge to find the point of construction where the chair is stable enough without looking over-dimensioned.
Nchọpụta: The aim for the project has been to create furniture with simple means of production. The use of CNC carved wood, was early decided as a production method, and has affected the design, which uses the advantages of CNC (curved shapes), without creating a piece of furniture that looks like it came from a CNC machine.
Mkpali: The project was developed by trying to create a simple and characteristic piece of furniture with the use of cost-effective and simple production methods and materials. Without access to a full scale workshop, CNC routing allowed to prefabricate the furniture with low cost, high precision and the possibility of creating curved shapes
Oge Ọrụ: The project started in march 2020 - and finished in late May 2020.
Usoro Ọrụ: The design breaks down the chair into its main components - legs, seat and backrest - and treats them as equally as possible by repeating and using the same dimensions, shapes, materials, joints and surfaces.
Patentị: Copyrights belong to Edvard Glazebrook, 2020
Ndị Otu: Edvard Glazebrook