Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị nke Jeffrey Geiringer

Ihe emepụtara bụ Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị nke Jeffrey Geiringer bụ onye meriri a na-asọpụrụ nke ukwuu nke 2024 Ihe Nrite A' Design Award nke Bronz na Udi Asọmpi Nhazi Ụdị Ebipụtara na 3D na Ngwaahịa.

BronzMbipụta 3D· 2024

Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị

nke Jeffrey Geiringer

Onye Ahịa: Quintessence Lighting

Onye Meriri Ihe Nrite A' Design Award nke Bronz na Udi Mbipụta 3D

40,659

Onye Meriri Onyinye A Kwadoro

Nyochaa Ọnọdụ Onyinye maka #159084

Gaa Saịtị Lee na A' Design Award Akụkọ Mgbasa Ozi Akara Onyinye

Agba

Nhazi a

Maka Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị

Ederede Akwụkwọ: Spectrum Series bụ mkpụrụ nhọrọ dị ntakịrị nke oriọna tebụl enwere ike ibugharị nke nwere ihe mkpuchi netiwerk nke e ji igwe onyonyo atọ (3D) bipụta ya. A na-emepụta oriọna ọ bụla site n'usoro paramitrik, ya mere na yiri na netiwerk ọ bụla dị iche iche. A na-ebipụta ihe mkpuchi ndị a site na PLA a nakọtaghachiri, na-eji koodu igwe e dere maka ebumnuche a, nke na-enye ahịrị netiwerk dị ọcha ma dị okpokoro. Ntọala ya na-echetara mmadụ ihe njide kandụl ochie ma enwere ike iji ntị ya bulie ya. A na-eji baturi enye oriọna a ike, a na-agbanye ma belata ìhè ya site n'imetụ obere ntị dị na ntọala ya aka. A na-emepụta oriọna ọ bụla naanị otu ugboro, yana ya sonyere asambodo nke ezi mmezu ya.

Nkwanye Ugwu

Maka Ihe Nrite A' Design Award nke Bronz

Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị meriri A' Design Award nke Bronz, nnabata dị oke ugwu e nyere design ndị pụtara ìhè nke a ma ama maka nzụlite ihe, ọgụgụ isi na nghọta. Ndị meriri na Bronz bụ ihe e mere nke ndị nwere nka nke ukwuu ma dị mma n'imepụta nke na-egosi ahụmahụ buru ibu, echiche na ọgụgụ isi nke ndị designer ha. A na-atụ anya na Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị ga-abụ ihe a na-asọpụrụ nke ukwuu, a na-eto na a hụrụ n'anya, nke dị oke ọrụ ma dị ọhụrụ. Design a meriri A' Design Award nke Bronz na-agụnye ụzọ kacha mma n'ime nka, sayensị, design na teknụzụ, ma dị mma nke ukwuu maka nlebara anya ya n'obere ihe. Quintessence Spectrum Series Oru Isi: Oriọna Tebụl Enwere Ike Ibugharị na-emezu mkpa nke ọma, na-emetụ ọchịchọ aka, na-adọrọ mmetụta obi ma na-adọta ọchịchọ ịmara.

N'azụ Nhazi a

Ngwugwu Mgbasa Ozi

Nkwurịta okwu, ndị otu na nkọwa teknụzụ nke onye nhazi nyere.

Àgwà Pụrụ Iche: The Spectrum Series is a limited-edition series of rechargeable table lamps featuring a never-before-seen type of lattice shade. The edition of 100 lamps is created using a parametric ‘object flow,’ resulting in a unique silhouette and lattice design for each lamp. Furthermore, each shade is printed in-house using fully custom g-code to ensure a flawless, clean lattice. As with an art practice, each lamp of the series will only be produced once and includes a certificate of authenticity.
Nha & Mkpuchi: Each lamp varies in WxD, but they are all 353mm Height. The shades vary from around 90mm W x 73mm D at the smallest to around 190mm W x 154mm D at the largest. The bases are all 110mm W x 110mm D and account for 238mm of the Height. All the shades are therefore 115mm Height. Naturally, in cases where the shade WxD is smaller than the base, the base WxD will be the assembled product WxD.
Mkpado: 3D printing, creative lighting, merging art + design, lattice lamp, limited edition design, 3D printed lamp, lattice, emerging tech, gcode, parametric design
Teknụzụ Mmepụta: Spectrum Series lampshades are created out of recycled PLA on a custom Voron R2.4 3D printer using regular FDM technology. The real technical challenge comes from the lattice shape of the shades; I have developed an entire software stack in Grasshopper for Rhino to generate these parametric lattice form as well as the G-code that runs the printer. This allows for exceptionally precise printed lattices with clean lines and no messy parts, virtually impossible to achieve with traditional slicers.
Ịma Aka Imepụta: I developed this project from scratch using my own ideas about lattices and the ways they interact with themselves to produce scintillating visual effects. It's not as simple as making any warped lattice and putting a light inside; only specific configurations of the lattice elements will produce the necessary visual interference. Not only did I need to produce the software to print the lattices, I needed to test many different lattice types before arriving at parameters for the final results.
Nchọpụta: I have conducted some experiments using lamps from the Spectrum Series in order to determine the impressions they give people. This involved instances of walking around busy nightlife streets carrying a lamp, as well as bringing a lamp to an outdoor music festival. My data collection consisted of tracking passerbys' reactions. The lamps were head-turning, but very few people will strike up conversation about such a thing. I think this approach was valuable and uncommon but not a complete study.
Mkpali: Ever since I first experienced 3D printing, I have been driven to create objects that can only be made using this technology. The Spectrum Series is an example of that: a non-solid lampshade, where the bulb is blocked not by a solid piece of material, but many tiny struts that, in its ideal form, never allow the viewer a direct glimpse of the bulb. Lattices with this much variability and style could never be produced until the advent of 3D printing, and that is what inspires me.
Oge Ọrụ: Quintessence: Spectrum Series builds on work I've done with lattice printing since June 2021, with intensive programming and design conceptualization work commencing in September 2022. My original concept for a lattice lamp was first realized circa 2014, just as a preliminary prototype. The project is based in Hong Kong, and is ongoing.
Usoro Ọrụ: Spectrum Series lamps are fully portable, battery-powered with around 20hr battery life, and have a base that is designed to resemble an old-style candlestick holder for a bit of a throwback feeling. A user may also carry the base by its stem, which includes a convenient wiggle shape to hold as well. Notably, the lamp is touch-activated at a small silver knob discreetly included on the base, and the light may be dimmed by touching and holding the knob, to dim down from full and up from dimmed.
Asụsụ Foto: All materials: Jeffrey Geiringer and Clever Machine Limited, 2023-2024.