Aspen Serê Sêpê لەلایەن Colorado Tripod Company

دیزاینی Aspen Serê Sêpê لەلایەن Colorado Tripod Company خەڵاتگرێکی بەناوبانگی خەڵاتی شکۆمەندی 2021 Xelata A' Design Award a Zîvîn لە پۆلی پێشبڕکێی Dîzayna Kamera û Amûrên Wênegirtinê.

ZîvAmûrên Wênegirtinê· 2021

Aspen Serê Sêpê

لەلایەن Colorado Tripod Company

کڕیار: Colorado Tripod Company

خەڵاتگری Xelata A' Design Award a Zîvîn لە پۆلی Amûrên Wênegirtinê

39,753

خەڵاتگری پشتڕاستکراو

پشتڕاستکردنەوەی باری خەڵات بۆ #108315

سەردانی ماڵپەڕ بینین لە A' Design Award ڕاگەیاندنی چاپەمەنی نیشانەی خەڵات

ڕەنگەکان

دیزاینەکە

دەربارەی Aspen Serê Sêpê

Aspen serê sêpeyeke ku ji bo hêsankirina pêkhatina wêneyan hatiye dîzaynkirin. Çarçoveyeke vekirî dihêle ku kamerayeke pêvekirî di herdu aliyan de baş ji 90 pileyan zêdetir bizivire, ku guhertinên bilez di navbera arastekirina panoramî û portreyê de bêyî L-braketên qerase pêk tîne. Gogê xwedî navekê valahî ye bi kunên ku giranî kêm dikin lê di heman demê de hêzê diparêzin. Girtaneke lîvera veguhêrbar cûrbecûr plakên kamerayan digire, kontrolkirina hevkêşê kişandinê saz dike, û kilîteke zivirînê zivirîna tam ji bo wêneyên panoramîk destûr dide. Aspen ji alûmînyoma anodkirî ya hişk hatiye teraşkirin.

پێناسەکردن

دەربارەی Xelata A' Design Award a Zîvîn

Aspen Serê Sêpê xelatgirê Xelata A' Design Award a Zîvîn e, nasîneke bi awayekî awarte bi prestîj ku ji sêwiranên di asta herî bilind de, xweşik û bibandor re tê dayîn. Xelatgirên Zîvînê karên pir birûsk û pir afirîner in, yên ku pisporiya hêja, jêhatîbûn û zîrekiya sêwiranerên xwe nîşan didin. Tê hêvîkirin ku Aspen Serê Sêpê karekî mînak, pir pîşekar û bi kûrahî nûjen be. Ev sêwirana bi Zîvînê serketî vedîtineke berbiçav û hatiye sitayişkirin e ku ji bo fireh kirina sînorên huner, zanist, sêwiran û teknolojiyê tevkarî dike. Aspen Serê Sêpê afirandinek e ku gelek kes çavê xwe lê dikin, daxwazan şiyar dike, hestên erênî tîne û heyirînê çêdike.

لە پشت دیزاینەوە

کیتی چاپەمەنی

باوەڕپێکراوەکان، ئەندامانی تیم و وردەکاری تەکنیکی کە لەلایەن دیزاینەرەوە پێشکەش کراون.

تایبەتمەندییە تایبەتەکان: The Aspen tripod head provides photographers with a large range of motion to simplify photograph composition. An open frame design allows an attached camera to rotate well beyond 90 degrees in both directions for quick adjustments in both landscape or portrait orientations. The ball features a hollow core with holes to reduce weight while maintaining strength and the adjustable lever clamp offers a quick and secure attachment to a wide range of camera plates.
قەبارە و پاکێج: Width: 134 mm x Depth: 55 mm x Height: 95 mm
Weight: 440 g
Ball Diameter: 48 mm
Load Capacity: 13.6 kg
تاگەکان: tripod head, ball head, camera support, tripod, photography accessory
تەکنەلۆژیای بەرهەمهێنان: The Aspen is constructed primarily from aluminum 6061 which is hard anodized for increased scratch and corrosion resistance. Stainless steel and bronze are also utilized for interacting threaded parts. All parts are CNC machined with either live-tooling lathes or 5-axis mills and the machining process was fine-tuned over many iterations to optimize tolerances and fit. The custom locking knob is constructed of an injected molded rubber to improve feel and ergonomics.
هەڵەنگاندنی دیزاین: In order to maximize range of motion, an open framed design was chosen for the Aspen. However, the construction proved difficult to ensure proper locking force and rigidity. The locking pads have much less surface area than traditional ball heads, so a number of pad shapes and materials were tested to optimize the locking mechanism. The surface finish of the anodized ball also proved to be a factor in the locking force. Additionally, the correct tolerances of the interacting parts was difficult, as a balance between tight fit and smooth movement was needed to achieve the end result.
توێژینەوە: A wide variety of competitor references were studied for load capacity, vibration dampening, material selection, weight and mechanical operation. Various test rigs were created to acquire data in addition to disassembly and reconstruction of parts. A weight gauge was created to measure the max load of ball heads at various locations of load relative to the center of the ball. A vibration dampening and rigidity test was created using gyroscope and accelerometer devices attached to the ball heads. Using the data, our design team gained insight into the mechanisms and features that create a high-strength, rigid, low-weight tripod head. Range of motion was also evaluated in all of the tripod heads reviewed to ensure the Aspen exceeded the limits of traditional ball heads.
ئیلهام: The Aspen design is centered around increasing range of motion to simplify the process of compositional framing for photographers who need to align their cameras quickly. The open frame construction eliminates the need to adjust the tripod legs to level the camera and makes bulky L-brackets unnecessary for switching from landscape to portrait orientations.
ماوەی پڕۆژە: The project started in 2018 and finished in early 2020 with all design, prototyping and manufacturing taking place in Denver, Colorado, USA. The product officially launched in July 2020.
ڕێڕەوی کارکردن: A camera is mounted on the adjustable lever clamp that is attached to the Aspen hollow ball. When adjustments are needed for compositional framing, the locking knob is released and the camera is rotated into position about the center axis of the ball and then re-locked. The friction control sets drag on the ball when moving freely for a customized experience. A panning lock can be tightened or loosened to create a secure lock or to rotate the ball head 360 degrees for panoramic photographs.
پەتێنتەکان: Patent Pending. Application Number 29725750. David Graham Clark. 2020. USA
ئەندامانی تیم: Colorado Tripod Company