Lasso ແຜ່ນແພຕົກແຕ່ງ ໂດຍ Cristina Orozco Cuevas

ຜົນງານ Lasso ແຜ່ນແພຕົກແຕ່ງ ໂດຍ Cristina Orozco Cuevas ເປັນຜູ້ຊະນະທີ່ໄດ້ຮັບຄວາມນັບຖືສູງຂອງລາງວັນ 2014 A' Design Award ລະດັບທອງສຳລິດ ອັນຊົງກຽດໃນໝວດການແຂ່ງຂັນ ການອອກແບບສິ່ງທໍ, ຜ້າ, ພື້ນຜິວ, ລວດລາຍ ແລະ ຜ້າ.

ທອງສຳລິດສິ່ງທໍ· 2014

Lasso ແຜ່ນແພຕົກແຕ່ງ

ໂດຍ Cristina Orozco Cuevas

ລູກຄ້າ: Cristina Orozco Cuevas Studio

ຜູ້ຊະນະ A' Design Award ລະດັບທອງສຳລິດ ໃນໝວດ ສິ່ງທໍ

23,184

ຜູ້ຊະນະລາງວັນທີ່ຢັ້ງຢືນແລ້ວ

ຢັ້ງຢືນສະຖານະລາງວັນສຳລັບ #30204

ເຂົ້າເບິ່ງເວັບໄຊ ເບິ່ງທີ່ A' Design Award ຂ່າວເຜີຍແຜ່ ເຄື່ອງໝາຍລາງວັນ

ສີ

ການອອກແບບ

ກ່ຽວກັບ Lasso ແຜ່ນແພຕົກແຕ່ງ

Lasso ຕາມ ຄຳ ນິຍາມແມ່ນສາຍເຊືອກຍາວທີ່ມີສາຍທີ່ແລ່ນຢູ່ສົ້ນ ໜຶ່ງ. ແທນທີ່ຈະໄດ້ຮັບການດົນໃຈໃນ; ແຜ່ນແພນີ້ແມ່ນຜົນຂອງ. ມັນມີທັງການ ສຳ ພັດພິເສດແລະຄວາມງາມນອກ ເໜືອ ຈາກບາງຊ່ອງທາງທີ່ຫລໍ່ຫລອມພິເສດເພື່ອໃຫ້ແສງສະຫວ່າງສາມາດຜ່ານໄດ້ອ່ອນໆ. ມັນແມ່ນອຸດສາຫະ ກຳ ເຄິ່ງ ໜຶ່ງ - ເຄິ່ງຫັດຖະ ກຳ, ແສ່ວໃນລວດອີເລັກໂທຣນິກແລະຕັດດ້ວຍມື. ໂຄງການນີ້ແມ່ນ ໜ້າ ສົນໃຈແລະເປັນສິ່ງເສບຕິດທີ່ສຸດທີ່ເປັນເຂົ້າ ໜົມ ແລະເປັນ ໜຶ່ງ ໃນບັນດາສິ່ງທ້າທາຍແລະການຄົ້ນພົບໃນອາຊີບຂອງຂ້ອຍທີ່ເປັນຜູ້ອອກແບບເສື້ອຜ້າ. ໂຄງການນີ້ແມ່ນກ່ຽວກັບ serendipia, ສະດຸດລົ້ມ, ການຄົ້ນພົບໂອກາດ, ຄວາມໂຊກດີແລະອຸປະຕິເຫດ.

ການຮັບຮູ້

ກ່ຽວກັບ A' Design Award ລະດັບທອງສຳລິດ

Lasso ແຜ່ນແພຕົກແຕ່ງ ແມ່ນຜູ້ຊະນະ A' Design Award ລະດັບທອງສຳລິດ ເຊິ່ງເປັນການຍອມຮັບທີ່ມີກຽດສູງສຳລັບການອອກແບບທີ່ໂດດເດັ່ນ ເຊິ່ງມີລັກສະນະເດັ່ນດ້ວຍຄວາມຄິດສ້າງສັນ ຄວາມຫຼັກແຫຼມ ແລະ ຄວາມຄົມຄາຍ. ຜູ້ຊະນະລະດັບທອງສຳລິດແມ່ນຜົນງານທີ່ມີທັກສະພຽງພໍ ແລະ ສ້າງສັນຢ່າງໂດດເດັ່ນ ທີ່ຢືນຢັນປະສົບການອັນກວ້າງຂວາງ ຈິນຕະນາການ ແລະ ຄວາມສາມາດຂອງຜູ້ອອກແບບ. Lasso ແຜ່ນແພຕົກແຕ່ງ ຖືກຄາດວ່າຈະເປັນສິ່ງຂອງທີ່ໄດ້ຮັບການຍົກຍ້ອງສູງ ໜ້າຊົມເຊີຍ ແລະ ເປັນທີ່ຮັກແພງ ທີ່ເປັນມືອາຊີບ ແລະ ມີນະວັດຕະກຳຢ່າງໂດດເດັ່ນ. ການອອກແບບທີ່ຊະນະລະດັບທອງສຳລິດນີ້ນຳໃຊ້ວິທີປະຕິບັດທີ່ດີທີ່ສຸດໃນດ້ານສິລະປະ ວິທະຍາສາດ ການອອກແບບ ແລະ ເຕັກໂນໂລຊີ ແລະ ດີເລີດໃນການເອົາໃຈໃສ່ລາຍລະອຽດ. Lasso ແຜ່ນແພຕົກແຕ່ງ ຕອບສະໜອງຄວາມຕ້ອງການຢ່າງດີເລີດ ສຳຜັດຄວາມປາດຖະໜາ ດຶງດູດຄວາມຮູ້ສຶກ ແລະ ກະຕຸ້ນຄວາມຢາກຮູ້ຢາກເຫັນ.

ເບື້ອງຫຼັງການອອກແບບ

ຊຸດຂ່າວ

ຂໍ້ມູນ, ສະມາຊິກທີມ ແລະ ລາຍລະອຽດທາງເຕັກນິກທີ່ສະໜອງໂດຍນັກອອກແບບ.

ຄຸນສົມບັດພິເສດ: half industrial - half crafted, designed with textile CAD software, woven in jacquard electronic looms and cut by hand. It is woven industrially, but cut by hand which gives job to machines and external people. It forms vertical channels as a kind of fray where the light can pass through very sofltly. The frays are crafted processes and lasts months. A fabric with this kind of processes in the industry mills is nearly impossible but not that much.
ຂະໜາດ ແລະ ບັນຈຸພັນ: Widths available: 1.40 m and 2.80 m. Rapport repeat: 35 cm width x 25 cm height. Uses: lamps, pillows, bedscarfs and decorative curtains. As a finish ironing the loose fur brings more volume and the frayed channels are more obvious. It is of massive production and the loose yarns are strongly moored with a tafeta special weave union.
ແທັກ: Jacquard, textile, decoration, fabric, lasso, half indusrtrial, half handmade, fur
ເຕັກໂນໂລຊີການຜະລິດ: All polyester dyed yarns woven in Jacquard electronic looms. The floated yarns are cut manually by a special tool we call knife shutter. The weave technique is very old (double fabric). However the important aspect is how I applied the weaves interlaced in order to be viable to be produced and not just as a prototype as good productivity performance. The special tool developed reminded textile engineers old techniques to make corduroy.
ສິ່ງທ້າທາຍດ້ານການອອກແບບ: At the beginning the aim was to develop a fabric with square bags. It would have little bags to put inside tools or jewelry. After weaving and testing different techiques, this came up as a serendipity all of it. There were more than 10 previews designs to get to the final lasso fabric. The weaves interaction result was floats in warp and weft. To cut the yarns in vertical and horizontal, we developed a special tool that works as a long shuttle knife to have a better and faster production. It was an enormous challenge to have it accomplished as a product and to convince the mill that it would work.
ການຄົ້ນຄວ້າ: The research was completely experimental. Textile engineers were afraid that using this technique on industrial looms could not work, specially the machines weaving. The process of cutting the loose yarns was hard in order to bring a product that because of the hand crafted process would not be so expensive that would not work with the market prices. Besides the lead time to deliver a roll of this product within 3 weeks at least. Since warping process till the client's door. The cut part can be done by external workers so other people get a job.
ແຮງບັນດານໃຈ: I named it lasso as a long rope with a running noose at one end. This project can be described as: experimentation. This fabric started with the research of something very different from the result. More than inspiration this project is about having luck, stumbling upon, chance discovery, fortuity and accident. It is a piece of hard work, research, mulish and not withdraw.
ໄລຍະເວລາໂຄງການ: The project started in March, 2012 and ended in September, 2012.
ຂັ້ນຕອນການດຳເນີນງານ: It has a special appearance as it seems as an extra application or embroidery upon the fabric but in fact it is woven like that. People always want to touch first than see the furry yarns. If there is light behind the soft feeling is quite special and light passes through the frayed parts. This kind of textile can replace goose feathers.
ສະມາຊິກທີມ: Cristina Orozco Cuevas