Sprout Dviratis – autorius JunXiang Cheng and Yi Yang

Darbas Sprout Dviratis, kurio autorius JunXiang Cheng and Yi Yang, yra itin vertinamas prestižinio 2022 Geležinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje 3D spausdintų formų ir produktų dizainas.

Geležinis3D spausdinimas· 2022

Sprout Dviratis

Dizaineris: JunXiang Cheng and Yi Yang

Klientas: JunXiang Cheng,Yi Yang,AoDong Li,JingYao Huang,ZiYu Zhao

Kategorijos 3D spausdinimas laimėtojas – Geležinis apdovanojimas A' Design Award

32,018

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #137286

Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Sprout Dviratis

Knygos tekstas: „Sprout" yra dviratis, pagamintas trimačio spausdinimo būdu. Rėmo forma sukurta naudojant topologinį optimizavimą, kuris medžiagą paskirsto tik ten, kur jos reikia, taip sumažinant bendrą sunaudojamą kiekį. Statinė įtempių analizė, atlikta baigtinių elementų metodu, patvirtina rėmo konstrukcijos stabilumą. Galutinis modelis atspausdintas iš didelio tankio nailono. Dviračio ilgis siekia 1630 mm, plotis – 600 mm, o aukštis – 832 mm. Spausdinimas eliminuoja poreikį naudoti brangias formas, todėl kiekvienas rėmas gali būti sukurtas pagal individualų dizainą.

Pripažinimas

Apie Geležinis apdovanojimas A' Design Award

Sprout Dviratis laimėjo Geležinį apdovanojimą A' Design Award, prestižinį pripažinimą, skiriamą geriems dizainams, atitinkantiems profesinius ir pramoninius reikalavimus, kurių tikimasi iš gerai suprojektuotų kūrinių. Geležies laureatai rodo didelius kūrėjų įgūdžius, aukštą specializaciją, ekspertinį supratimą ir kūrybinį gebėjimą. Tikimasi, kad Sprout Dviratis bus aukštai vertinamas, žavimas ir brangus kūrinys, praktiškas ir novatoriškas. Šis Geležiniu apdovanojimu įvertintas dizainas integruoja geriausias pramonės praktikas ir turi kompetentingas technines savybes, susietas su patirtimi ir talentu. Sprout Dviratis gerbiamas už kruopštumą ir sukurtas taip, kad gerintų gyvenimo kokybę ir padėtų padaryti pasaulį geresne vieta.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: Bicycles made by traditional technology are often single in shape and lack of characteristics. After the introduction of 3D printing technology, the bicycle after topology optimization not only has a better lightweight design, but also gets rid of the high mold cost, and carries out an industrial mode of producing one piece for one design or even one piece for multiple designs.
Matmenys ir pakuotė: Length 1630mm, width600mm, height 832mm
Žymos: Topological Optimization, 3D Printing, bicycle, conceptual design, vehicle design
Gamybos technologija: The structure of the bicycle is optimized by means of topology optimization, and the design is carried out on the basis of the optimized model. Finally, the bicycle model is made of high density nylon material through 3D printing
Dizaino iššūkis: The most difficult part is the topology optimization of the bicycle, because it includes related mechanics such as statics. It's a whole new area for us, it's a whole new challenge.The second is to verify the feasibility of material technology, which takes a long time, the cost of changing material technology, the difficulty of production, and the acceptance of people in real life. These are the considerations for this design study.
Tyrimas: Research objectives: 1. How to optimize the structure of bicycle 2. Research methods of existing 3D printing materials and technologies and topology optimization methods: 1. Field investigation data analysis 2. Online data collection results: With the introduction of 3D printing technology, metal materials can be made into the form of car frames, just like sculptures, without the constraints of traditional processes. At the same time, 3D printing technology can get rid of the high cost of mold, and carry out the industrial model of one design producing one piece, or even multiple designs producing only one piece. Even the same design can be printed with different materials.
Įkvėpimas: According to the investigation, in the long days of steel and aluminum tubes, the basic shape of the bicycle was a variety of subtle variations of the diamond frame under the linear structure. Bicycle product modeling language is relatively simple, in addition to the details of the process, the biggest surprise may be coating. From the point of view of design, it is hoped that through 3D printing design, people can obtain bicycles with better stability and more personality rather than the bicycles produced in industrial batches in the past. So that people's bikes get the best lightweight and reduce the loss of more resources.
Projekto trukmė: The project started in March 2021 and ended in May 2021. Project duration: 2 months. Location: Wuhan City, Hubei Province, China.
Veikimo eiga: By using a professional design system, the topology optimization of the bicycle frame is carried out, and then the optimization of the corresponding frame prototype is completed according to the corresponding optimization results, and the bicycle is produced by 3D printing. The bicycle frame after topology optimization not only reasonably plans the distribution of the material structure, reduces the amount of material, but also reduces the energy consumption rate and the emission of harmful substances in the exhaust. Secondly, the static stress analysis of the frame is carried out by applying the finite element method in topology optimization, so as to complete the design and stability verification of the frame structure more efficiently, shorten the product development cycle, and make new products more efficient in development.
Komandos nariai: Designer：JunXiang Cheng
Designer：Yi Yang
Designer：AoDong Li
Designer：JingYao Huang
Designer：ZiYu Zhao