Horizontal Long Mesh Laužo Stovas – autorius Shigeru Yamada

Darbas Horizontal Long Mesh Laužo Stovas, kurio autorius Shigeru Yamada, yra itin vertinamas prestižinio 2024 Sidabrinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Lauko reikmenų ir stovyklavimo įrangos dizainas.

SidabrinisStovyklavimo įranga· 2024

Horizontal Long Mesh Laužo Stovas

Dizaineris: Shigeru Yamada

Klientas: Norinori Life

Kategorijos Stovyklavimo įranga laimėtojas – Sidabrinis apdovanojimas A' Design Award

164,851

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #153103

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Horizontal Long Mesh Laužo Stovas

Nors atviros ugnys gali pažeisti veją ir dirvožemį, šis lengvas ir kompaktiškas gaminys su nerūdijančio plieno rėmu ir įgaubtu tinklelio rėmu leidžia mėgautis laužais įvairiose aplinkose neplatinat pelenų ar ugnies žiežirbų aplinkoje. Japonijoje patentuota konstrukcija leidžia liepsnoms prasiskverbti pro tinklelį naktį, leisdama stebėti, kaip mediena švelniai virsta pelenais.

Pripažinimas

Apie Sidabrinis apdovanojimas A' Design Award

Horizontal Long Mesh Laužo Stovas laimėjo Sidabrinį apdovanojimą A' Design Award, nepaprastai prestižinį pripažinimą, skiriamą aukščiausios klasės, puikiems ir įspūdingiems dizainams. Sidabro laureatai yra itin puikūs ir labai kūrybingi darbai, rodantys jų kūrėjų išskirtinę kompetenciją, talentą ir įžvalgumą. Tikimasi, kad Horizontal Long Mesh Laužo Stovas bus nuostabus, pavyzdinis, labai profesionalus ir giliai novatoriškas kūrinys. Šis Sidabriniu apdovanojimu įvertintas dizainas yra žymus, žavimas išradimas, padedantis plėsti meno, mokslo, dizaino ir technologijų ribas. Horizontal Long Mesh Laužo Stovas yra kūrinys, kuriam daugelis pavydi, žadinantis troškimus, teikiantis teigiamų jausmų ir sukeliantis nuostabą bei stebėjimąsi.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: Most ordinary mesh-type fire pits have the mesh supported from below, but this product has a concave mesh structure that hooks onto the side frames, a structure that did not exist before and for which a patent was obtained (patent 7249692). This unique structure eliminates the weak point of conventional mesh-type fire pits, which are vulnerable to wind and difficult to cook with, while at the same time realizing the unique value of the beautiful flames shining through the mesh.
Matmenys ir pakuotė: Size:
W53cm×D18cm×H32cm(when assembled)
W50cm×D25cm×H5cm(when stored)
Material:
Main body, sidebars, legs: Stainless steel (SUS304)
Mesh sheet: Stainless steel (SUS304) ＊Dovetails are made of aluminum
Storage bag: cotton
Logo sticker: High-gloss paper (water-resistant)
Weight:1.8kg
Žymos: Outdoor, Camping, Bonfire
Gamybos technologija: Conventional mesh-type fire pits were used with the mesh spread out, but while they were lightweight and compact, they were vulnerable to wind and unsuitable for cooking. The mesh is then hooked onto a frame made of stainless steel (which can be assembled and put away in less than 30 seconds), creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash. The ironworker, who is a camper himself, developed this product under the direction of an outside designer to achieve both functionality and aesthetics.
Dizaino iššūkis: The main focus of this product was to hold the woven stainless steel mesh in a U-shape with a frame, but it was also a portable product, so it needed to be compact and lightweight. Therefore, it was necessary to consider a variety of structures that could be easily assembled with a minimum of parts.
Tyrimas: With the outdoor boom that began in the late 2010s, camping for a small group of one or two people has become especially popular, and a variety of outdoor gears have been sold. Among them, fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with. The new design has a stainless steel frame (which can be assembled and put away in less than 30 seconds) and a structure that hooks onto the mesh, creating a situation where the mesh can be used in a concave shape. The mesh is woven in a way that allows air to pass through without allowing ash to pass through, resulting in high combustion efficiency even in strong winds, and even large pieces of firewood ash up nicely. The frame can also be used for easy cooking by hooking the stove to the frame. At night, the flames through the mesh are very beautiful, and you can watch the wood gradually turn to ash.
Įkvėpimas: Fire pits made of stainless steel mesh are popular and numerous, but while they have the advantage of being lightweight and compact, they have the disadvantage of being vulnerable to wind and difficult to cook with.
Projekto trukmė: This product was launched in Japan on September 1, 2021
Veikimo eiga: This fire pit was created by an ironworker who is also a camper. The stainless-steel mesh with high combustion efficiency is shaped in a concave that is less susceptible to wind. By using a trivet, a heavy Dutch oven can also be used. It is designed to allow the flames to be seen for its beauty and ease of cooking over an open fire where you can always see the heat level. Tough, minimal, and logical structure with an exquisite finishing. It is true craftsmanship quality that you will appreciate every time you use it.
Patentai: This product is patent pending (Patent Application 2023-011315, filed 1/27/2023) by Noridomi Ironworks Co.,LTD.
Komandos nariai: Creator:Shigeru Yamada
Creative Derector:Takashi Sekimitsu
Assistant Director:Kenzo Noridomi
Nuotraukų autoriai: Image #1: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #2: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #3: Director Kenzo Noridomi, Horizontal Long Mesh, 2023.
Image #4: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.
Image #5: Photographer Tsuneharu Doi, Horizontal Long Mesh, 2022.