Vista EY2T Motorizuota biometrinė identifikavimo kamera – autorius Chris Dopp & Travis Baldwin

Darbas Vista EY2T Motorizuota biometrinė identifikavimo kamera, kurio autorius Chris Dopp & Travis Baldwin, yra itin vertinamas prestižinio 2015 Sidabrinis apdovanojimas A' Design Award laimėtojas konkurso kategorijoje Apsaugos, saugumo ir stebėjimo produktų dizainas.

SidabrinisSaugumo produktai· 2015

Vista EY2T Motorizuota biometrinė identifikavimo kamera

Dizaineris: Chris Dopp & Travis Baldwin

Klientas: Vista Imaging and Crea Inc Design LTD

Kategorijos Saugumo produktai laimėtojas – Sidabrinis apdovanojimas A' Design Award

25,961

Patvirtintas apdovanojimo laimėtojas

Patikrinti apdovanojimo statusą – #40052

Aplankykite svetainę Peržiūrėti A' Design Award Pranešimas spaudai Apdovanojimo ženklelis

Spalvos

Dizainas

Apie Vista EY2T Motorizuota biometrinė identifikavimo kamera

„Vista EY2T“ yra motorizuota biometrinė identifikavimo kamera, skirta rainelės ir veido atpažinimui. Įrenginys nuskaito regėjimo lauką ieškodamas veidų, tuomet varikliai pasuka kamerą taip, kad ji nusitaikytų į akis. Platus infraraudonųjų spindulių šviesos diodų spektras ir automatinio fokusavimo sistema leidžia fiksuoti vaizdą 3–6 pėdų (0,9–1,8 m) atstumu, todėl rankinis nukreipimas nėra reikalingas. Devyni priekiniai jutikliai yra sujungti po viena juoda plokštuma, o cilindrinė piliulės formos konstrukcija su suapvalintais galais suteikia kamerai ramų ir negrėsmingą vaizdą. Kamera gali būti naudojama savarankiškai arba su sieniniu laikikliu.

Pripažinimas

Apie Sidabrinis apdovanojimas A' Design Award

Vista EY2T Motorizuota biometrinė identifikavimo kamera laimėjo Sidabrinį apdovanojimą A' Design Award, nepaprastai prestižinį pripažinimą, skiriamą aukščiausios klasės, puikiems ir įspūdingiems dizainams. Sidabro laureatai yra itin puikūs ir labai kūrybingi darbai, rodantys jų kūrėjų išskirtinę kompetenciją, talentą ir įžvalgumą. Tikimasi, kad Vista EY2T Motorizuota biometrinė identifikavimo kamera bus nuostabus, pavyzdinis, labai profesionalus ir giliai novatoriškas kūrinys. Šis Sidabriniu apdovanojimu įvertintas dizainas yra žymus, žavimas išradimas, padedantis plėsti meno, mokslo, dizaino ir technologijų ribas. Vista EY2T Motorizuota biometrinė identifikavimo kamera yra kūrinys, kuriam daugelis pavydi, žadinantis troškimus, teikiantis teigiamų jausmų ir sukeliantis nuostabą bei stebėjimąsi.

Už dizaino

Spaudos rinkinys

Dizainerio pateikti kreditai, komandos nariai ir techninė informacija.

Unikalios savybės: The EY2T is an auto rotating biometric ID camera. It scans the field of view for faces, then using motors it rotates it to aim directly at eyes for best capture. The wide spread of LEDs allows capture at 3 to 6 feet. This eliminates manually aiming at the eyes and captures at greater range. The motors, distance sensor, LEDs, and autofocus make the device unique. The versatility of mounting, either standalone or with wall mount, plus the simple pill shaped design stand out from competition.
Matmenys ir pakuotė: The overall dimensions in the tripod configuration are 215 mm wide x 116 mm tall x 77 mm deep. In this housing, it is mounted at roughly human eye level.
When using the alternative wall mounted outer housing, the EY2T is a different size. The overall dimensions are 199mm x 108mm x 51mm. When mounted, the size of the exposed portions rising from the surface of the wall are 15mm x 108mm x 199mm. The hole required for the device is 190mm x 51mm x 102mm.
Žymos: Biometric, Identification, Iris, Facial Recognition, Camera, Vista Imaging, Security, Access
Gamybos technologija: The EY2T is a combination of thermoset injection molded plastics, CNC produced metal support arms, internal bearings & motor, screws, printed circuit boards & components, glass lenses, and rubber strain reliefs. The plastic is both opaque PC ABS material, as well as semitransparent IR light transmissive Bayer plastic for the front lens.
Dizaino iššūkis: The biggest challenge was simplifying the exterior so the design is non-threatening to users. This was especially difficult when resolving the intimidating amount of sensors on front surface, accomplished through aesthetic positioning and IR light transmissive plastics. Another difficulty was to design a form allowing motorized rotation without exposing the mechanics. The wide variety of potential markets was also a challenge, leading to multiple mounting options and variations of the design through sensor options and their internal positions.
Tyrimas: Qualitative interviews found people have concerns about biometric capture, leading to a specific design tone: Serious, but friendly. As the camera is motorized, research was done into friendly robot styles (ex: Eve from Wall-E) which guided the design. Research showed competitor products and new biometric technology, such as face tracking, which was integrated. Target client environments were considered (ex: offices where people are identified for high value transactions or receiving money).
Įkvėpimas: Inspiration was a need for simple appearance and operation when capturing a persons identity, something that could be uncomfortable. The rotating form in form design reduces apparent motion when it aims at the eyes. There are 9 front sensors simplified by a black face unifying them aesthetically. The overall width allows a wide spread of the IR LED, located to the far left and right, thus increasing range. The cylindrical form allows rotation and the spherical ends add a friendly shape.
Projekto trukmė: The project was conceptualized in San Carlos, CA (USA) in early 2013, and developed jointly in Bristol (UK) and California over the year. The project continued over 2014 and was finished in early 2015. Plastic housings were created in Carlsbad CA (USA) & Shenzhen (China), and electronics were produced in Singapore.
Veikimo eiga: When a subject approaches, it 1st recognizes faces and locates the eyes. Motors pivot to aim the cameras at the face. When aimed, LEDs illuminate the IRIS and the distance sensor helps camera focus. A high res image is captured of both eyes and cropped. The 2nd camera captures the entire face with a flash. The images are processed and sent for identification.
Quickly acquiring biometric images, using the many sensors & motors, allows EY2T to outperform manual ID cameras. The wide LED spread & autofocus allow a greater range of capture.
Komandos nariai: Project Manager: Chris Dopp
Electrical Engineering: Keith Grethen
Software Engineering: Ted Stein
Manufacture: Charles Arentzen
Industrial Designer: Travis Baldwin
Nuotraukų autoriai: Image #1: Photographer Travis Baldwin / In Office / 2015

Image #2: Photographer Travis Baldwin / IRIS Capture Window / 2015

Image #3: Illustrator Travis Baldwin / Wall Mounted Showing Rotation / 2015

Image #4: Illustrator Travis Baldwin / Image Capture in Office / 2015

Image #5: Illustrator Travis Baldwin / Wall Mount with Face / 2015