Solarbreaker Fotoelektriskais fasādes slēģis — Jaroslaw Markowicz

Darbs Solarbreaker Fotoelektriskais fasādes slēģis, kura autors ir Jaroslaw Markowicz, ir augsti novērtēts un ļoti prestižās 2020 Sudraba balva A' Design Award ieguvējs kategorijā Būvmateriālu un būvkomponentu dizains.

SudrabaBūvkomponenti· 2020

Solarbreaker Fotoelektriskais fasādes slēģis

Autors: Jaroslaw Markowicz

Klients: Phoenix Enterprise

Sudraba balva A' Design Award ieguvējs kategorijā Būvkomponenti

34,482

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #102697

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Solarbreaker Fotoelektriskais fasādes slēģis

Solarbreaker ir fotoelektriskais fasādes slēģis, kas ēku virsmas pārvērš par enerģiju ražojošiem elementiem. Sistēmas pamatā ir presētie alumīnija profili, uz kuriem tiek montēti saules paneļi. Katrs panelis ir noliekts četrdesmit piecu grādu leņķī augstākai efektivitātei, un viens viena kvadrātmetra modulis var nodrošināt enerģiju sešpadsmit LED spuldzēm. Montāžai gandrīz nav nepieciešami instrumenti, jo profili tiek novietoti uz stiprinājuma un fiksējas paši sava svara dēļ. Kabeļi ir paslēpti profilu iekšpusē. Papildus fasādēm no tiem pašiem komponentiem var veidot žogus, barjeras un žalūzijas.

Atzinība

Par Sudraba balva A' Design Award

Solarbreaker Fotoelektriskais fasādes slēģis ir Sudraba balvas A' Design Award ieguvējs, ārkārtīgi prestiža atzinība, ko piešķir augstākās klases, krāšņiem un iespaidīgiem dizainiem. Sudraba ieguvēji ir ārkārtīgi spožas un ļoti radošas izpausmes, kas parāda to dizaineru izcilo kompetenci, talantu un asredzību. Sagaidāms, ka Solarbreaker Fotoelektriskais fasādes slēģis būs lielisks, paraugdarbs, ļoti profesionāls un dziļi inovatīvs. Šis ar Sudraba balvu apbalvotais dizains ir ievērojams, apbrīnots izgudrojums, kas palīdz paplašināt mākslas, zinātnes, dizaina un tehnoloģiju robežas. Solarbreaker Fotoelektriskais fasādes slēģis ir radījums, kam daudzi apskauž, kas modina vēlmes, rada pozitīvas izjūtas un raisa izbrīnu un apbrīnu.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: Our solutions make photovoltaics an integral part of the building. Solarbreaker products make possible to use the entire building facade for energy production without disturbing its aesthetics. The system has been developed to give the greatest configuration options in the simplest possible form. The main application of Solarbreaker are building facades, however, using the flexible capabilities of the system we can build barriers, fences, window blinds or free-standing blinds from it.
Izmēri un iepakojums: Basic module dimensions 1000mm x 120 mm x 1000mm
Birkas: Solar panels, photovoltaic, facade shutter, architecture, fence
Ražošanas tehnoloģija: The solarbreaker design is based on extruded profiles. Solar panels are mounted on the main profile. This method of assembly allows to easily separate materials so that the product can be recycled. The solution has been designed to be easy to install. Extruded profiles fold like lego blocks and allow for wide arrangement possibilities.
Dizaina izaicinājums: The biggest challenge of the project was to create a product that would retain its lightness despite the internal electronics and photovoltaic panel
Pētījums: The main research was to develop a product which can be adapted to almost any building. This required extensive analysis of the various buildings and their constructions. These studies have resulted in a design that is very easy to assemble. The first tests were made on 3D printed models. The wing loads were tested many times, which allowed the development of aluminium profiles with the required parameters.
Iedvesma: The main inspiration for the product was the sun protection solutions existing on the market. Large glazed facades, unfortunately, make the rooms get very hot, the sun from the south can be a problem, however, we wanted to turn this disadvantage into an advantage. Solarbreaker allows to use almost the entire building for electricity production and at the same time protect it from the sun.
Projekta ilgums: the project was developed in Warsaw. Conceptual work lasted from november 2018. After many prototypes and tests, the project was finally implemented in January 2020.
Darbības plūsma: Connecting profiles and building structures requires almost no tools. The structure is built directly on site from components. Finished profiles with photovoltaic panel just need to be put on the mounting and pressed - under the pressure of weight the element will lock. Solarbreaker is equipped with the elements necessary to connect it to the home power grid. Cable connections are hide inside the profiles, therefore the solution is durable and resistant to weather conditions. The 1m2 module will produce enough energy to power sixteen LED bulbs (80wat in total). Each panel is tilted at an angle of 45 degrees, which ensures the highest efficiency.
Komandas dalībnieki: Jarosław Markowicz, Daniel Ziomek