Darbs Junone Galda lampa, kura autors ir Alan Aronica, ir augsti novērtēts un ļoti prestižās 2021 Dzelzs balva A' Design Award ieguvējs kategorijā Tēlotājmākslas un mākslas instalāciju dizains.

DzelzsTēlotājmāksla· 2021

Junone Galda lampa

Autors: Alan Aronica

Klients: Alan Aronica

Dzelzs balva A' Design Award ieguvējs kategorijā Tēlotājmāksla

11,437

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #123885

Apmeklēt vietni Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Junone Galda lampa

Junone ir lampa, kas radīta gan kā funkcionāls gaismas avots, gan kā skulpturāls objekts. Forma apvieno noapaļotus organiskus veidus ar spriegumiem, kas iedvesmoti no aeronautikas nozares, radot arhitektonisku klātbūtni un virziena izjūtu. Junone ir izgatavota vienīgi no 3D printēta neilona ar stikla piedevu un 3D printēta tērauda ar bronzas piedevu. Dobs korpuss samazina izmantotā materiāla daudzumu, nemazinot konstrukcijas izturību. Lampā ir iestiprināma nomaināma un regulējama 5 vatu LED spuldze, kas tiek darbināta ar vienkāršu slēdzi. Junone ir ierobežota sērija, kas sastāv no desmit numurētiem eksemplāriem.

Atzinība

Par Dzelzs balva A' Design Award

Junone Galda lampa ir Dzelzs balvas A' Design Award ieguvējs, prestiža atzinība, ko piešķir labiem dizainiem, kas atbilst profesionālajām un rūpnieciskajām prasībām, kādas sagaidāmas no labi izstrādātiem darbiem. Dzelzs ieguvēji parāda to radītāju lielo prasmi, augsto specializāciju, ekspertu izpratni un radošo spēju. Sagaidāms, ka Junone Galda lampa būs augsti vērtēts, apbrīnots un cienīts darbs, praktisks un inovatīvs. Šis ar Dzelzs balvu apbalvotais dizains integrē nozares labāko praksi un tam ir kompetentas tehniskās īpašības, kas saistītas ar zinātību un talantu. Junone Galda lampa tiek cienīts par rūpību un ir izstrādāts, lai uzlabotu dzīves kvalitāti un palīdzētu padarīt pasauli labāku.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: Junone is an exploration of the contrast arising from the juxtaposition of voluptuous organic shapes with sculptural tensions inspired by the aeronautical industry. Conceived to be architectural and yet suggesting a dynamic sense of directionality, Junone is made exclusively with 3D printed nylon infused with glass & 3D printed steel infused with bronze. Junone is part of a special series limited to only 10 pieces, each of which has a numbered label.
Izmēri un iepakojums: W:200mm x D:220mm x H:210mm;
Lighting: 5 Watt LED;
4,5m power cord (CEI 23-50 S11);
Birkas: #3dprinted, #3dprinting, #designerlighting, #functionalart, #design
Ražošanas tehnoloģija: Multi Jet Fusion 3D Printing using PA12 Nylon 40% Infused with Glass Beads; Binder Jetting 3D Printing using Stainless Steel 40% Infused with Bronze Matrix.
Dizaina izaicinājums: I believe in taking only the resources that are really needed, that is why I work exclusively with additive manufacturing. One of the challenges in the 3D modeling phase was to create a 3D printable empty shell, to use the least possible amount of material without compromising neither the structure nor the aesthetic. Another challenge was to take full advantage of the reflective properties of metal, designing the interaction of light with the object from every angle. This was achieved by forecasting the light pathways through photorealistic renders.
Pētījums: Having had previous experiences both with 3D printed nylon/glass & 3D printed steel/bronze, I had a clear idea of how the materials would behave. I started by recreating an accurate digital model of the lightbulb and power cord, then I digitally sculpted the lamp's body around them. Once the design was locked, I recreated a 3D polygonal model accounting for the different physical properties of the materials as well as the different tolerances of the manufacturing techniques. After the 3D printing process, I hand-assembled and tested the lamp extensively.
Iedvesma: Just like the shift from tempera to oil painting during Renaissance empowered a new generation of painters to express their creativity in unprecedented ways, the shift from subtractive to additive manufacturing enables us today to explore shapes that could simply not be fabricated before. With Junone I aim to challenge the dogma of how a lamp should look like and educate the public on the novel possibilities that 3D printing can offer to create a new generation of luxury goods.
Projekta ilgums: The project started in January 2021 in Milan and finished in March 2021 in Milan.
Darbības plūsma: This is to all effects a functional lamp, operated through a traditional ON/OFF switch and powered through a power cord from a wall plug.
The 4.5m power cord allows to reach even far away plugs. The LED lightbulb creates a warm and welcoming light without heating, and it is both dimmable and replaceable.