Luf Stādu paliktnis — Industrial Design College of LAFA

Darbs Luf Stādu paliktnis, kura autors ir Industrial Design College of LAFA, ir augsti novērtēts un ļoti prestižās 2023 Dzelzs balva A' Design Award ieguvējs kategorijā Ilgtspējīgu produktu, projektu un zaļais dizains.

DzelzsIlgtspējīgs produkts· 2023

Luf Stādu paliktnis

Autors: Industrial Design College of LAFA

Klients: LuXun Academy of Fine Arts

Dzelzs balva A' Design Award ieguvējs kategorijā Ilgtspējīgs produkts

24,662

Verificēts balvas ieguvējs

Verificēt balvas statusu dizainam #148786

Skatīt A' Design Award Preses relīze Balvas žetons

Krāsas

Dizains

Par Luf Stādu paliktnis

Luf ir stādu paliktnis, kas izgatavots no lufas šķiedras. Luf aizstāj plastmasas paliktņus ar bioloģiski noārdāmu materiālu, kas veidots no sasmalcinātas lufas, bioloģiskas izcelsmes līmvielas un cietinātāja, kurus karsē un presē veidnē. Paliktņus var salikt vienu virs otra, tāpēc viens cilvēks var vienlaikus nest vairāk nekā piecus paliktņus. Katrs paliktnis ir sadalīts trīs neatkarīgās daļās un to var sagriezt pa iezīmētajām līnijām. Kad stādi ir izauguši, paliktni iestāda augsnē, kur tas sadalās barības vielās. Lufas sēklas var savākt un izmantot turpmākai audzēšanai.

Atzinība

Par Dzelzs balva A' Design Award

Luf Stādu paliktnis ir Dzelzs balvas A' Design Award ieguvējs, prestiža atzinība, ko piešķir labiem dizainiem, kas atbilst profesionālajām un rūpnieciskajām prasībām, kādas sagaidāmas no labi izstrādātiem darbiem. Dzelzs ieguvēji parāda to radītāju lielo prasmi, augsto specializāciju, ekspertu izpratni un radošo spēju. Sagaidāms, ka Luf Stādu paliktnis būs augsti vērtēts, apbrīnots un cienīts darbs, praktisks un inovatīvs. Šis ar Dzelzs balvu apbalvotais dizains integrē nozares labāko praksi un tam ir kompetentas tehniskās īpašības, kas saistītas ar zinātību un talantu. Luf Stādu paliktnis tiek cienīts par rūpību un ir izstrādāts, lai uzlabotu dzīves kvalitāti un palīdzētu padarīt pasauli labāku.

Aiz dizaina

Preses materiāli

Dizainera sniegtie autori, komandas dalībnieki un tehniskie dati.

Unikālās īpašības: The development model of converting plastic seedling trays "from cradle to grave" to loofah biodegradable trays "from cradle to cradle". Break the loofah and hot-press glutinous rice glue to synthesize new materials. The trays can be interspersed up and down and a single person can carry more than five trays at a time. Transplanted into the soil and degraded into nutrients. The chassis can be reused or dried for crops, and the loofah seeds can also be recycled to continue seedling cultivation.
Izmēri un iepakojums: Width 800mm x Depth 490mm x Height 70mm，The size of the hole plate is 540 mm*280 mm. Vegetable seedlings generally use 50 to 288holes. The shape of the holes is round or square, generally between 0.6 and 1.2 mm.
Birkas: Loofah, seedling tray, transportation, rural revitalization strategy, sustainable design
Ražošanas tehnoloģija: Prepare 50 parts of loofah fiber, 15 parts of bio-based green adhesive, 1 part of curing agent, and 2 parts of ethanol diluent in the weight ratio, and heat the prepared materials in the mold at 20 °C to 0.2 MPa for 60 min. The finished product has been tested for load-bearing, water seepage, stretching, and degradation. After the loofah is crushed and combined with other green raw materials, it can form a block shape, which meets the basic standards for seedling trays.
Dizaina izaicinājums: Applying the loofah material of agricultural waste to seedling trays, from the perspective of circular design, it is necessary to meet the functionality while conforming to the sustainable design theory, and give full play to the social, cultural and commercial values of agricultural waste in the design. New rural construction under the strategy of rural revitalization. It should be explored whether this material can be directly applied to 3D printing to make more finished products.
Pētījums: (1)Clean up the loofah fiber to remove impurities (2) Dry the loofah fiber (3) Add binder and diluent to the dried loofah fiber and stir fully to make a premix (4) Mix well The final premix is added with curing agent and then fully stirred as a preparation (5) Heat the preparation in the mold at 20°C to 0.2MPa and pre-press for 60min (6) Heat at 20°C and press at 40MPa for 10min The finished product is obtained.
Iedvesma: In China's vigorous implementation of the rural revitalization strategy, the scale of agricultural production has expanded, leading to an increase in crop residues. With the advantages of high yield and degradability of loofah, it has been widely used in the field of seedling cultivation along with the "C2C" concept. Large-scale nursery bases are mechanized facilities and are not suitable for rural areas. Natural materials used in plant cultivation are finally back to nature.
Projekta ilgums: The project started in May 2022 and finished in January 2023 in Lu Xun Academy of Fine Arts.
Darbības plūsma: Establish a closed cycle metabolic process of "production-recovery-remanufacture" of raw materials. The chassis of the whole seedling can be carried by a single person according to the weight of more than 5 trays, which are divided into three independent trays. After the plant seedlings are mature, they are transplanted into the soil, and can be cut as a whole or along the dotted line to be transplanted as independent individuals. After transplanting, they will soon decompose into the soil.
Komandas dalībnieki: Designer: Du Heli
Designer: Jia Zhuohang
Designer: Xue Bomu
Attēlu autori: Image #1: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #2: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #3: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #4: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023
Image #5: Designer Du Heli, Jia Zhuohang and Xue Bomu, Luf, 2023