Ko te hoahoa Mira Turi nā Cemil Yavuz he kaitoa whakahirahira o te 2021 A' Design Award Rino i te Wāhanga Whakataetae Hoahoa Taputapu.
RinoTaputapu· 2021
Mira Turi
nā Cemil Yavuz
Kiritaki: Cemil Yavuz
Kaitoa o te A' Design Award Rino i te Wāhanga Taputapu
Kaitoa Tohu Manatokohia
Manatokohia te Tūnga Tohu mō #116467Te Hoahoa
Mō Mira Turi
He turi a Mira i hangaia mō te kai me te nohonoho whānui. Ko te anga i hangaia mai i ngā porowhita rino kāore e waikura, e toru ngā takoto. E rua ngā takoto kua piko ki te kaupapa kotahi me te ahunga kotahi, ā, ko te toru kua piko kē. Ko ngā mata nohoanga me te tuara kua hipokina ki te kaka e piri ana ki te anga, ā, ko ngā waewae kirihou e taea ana te whakarōpū teitei hei whakaoti i te turi. He māmā a Mira, ka taea te whakatakoto ki te tepu, ki te noho anō rānei anō he mea motuhake. Ka taea te whakamahi i te turi mā te whakapiko ki mauī, ki matau rānei. Ka tukuna mai a Mira kāore anō kia hono, nā reira ka taea e ngā kaiwhakamahi te whakahiato i te turi i muri i te wāhi i te pouaka.
Te Whakamihi
Mō te A' Design Award Rino
Ko Mira Turi te toa o te A' Design Award Rino, he whakaaetanga whai mana e hoatu ana ki ngā hoahoa pai e whakatutuki ana i ngā hiahia ngaio me te ahumahi e tūmanakohia ana mai i ngā mahi kua hoahoatia pai. Ko ngā toa Rino e whakaatu ana i te pukenga nui, te tohungatanga teitei, te māramatanga mātanga me te kaha auaha o ō rātou kaihanga. E tūmanakohia ana ko Mira Turi he mahi whakanuia, whakamīharotia, aroha nui, he whaihua, he auaha hoki. Ko tēnei hoahoa i toa i te Rino e whakakotahi ana i ngā tikanga pai rawa o te ahumahi, ā, he āhuatanga hangarau pūkenga tōna e hono ana ki te mōhio me te pūmanawa. E whakahonoretia ana a Mira Turi mō tōna tōtika, ā, i hoahoatia hei whakapai ake i te kounga o te oranga me te āwhina i te ao kia pai ake.
I Muri i te Hoahoa
Kete Pāpāho
Ngā whakamihi, ngā mema o te rōpū me ngā taipitopito hangarau i whakaratohia e te kaihoahoa.
- Āhuatanga Motuhake
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Inenga & Pēketanga
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Tūtohu
- Bending, Metal Profile, Chair, Simple, Elegant
- Hangarau Whakanao
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Wero Hoahoa
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Rangahau
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Whakaaweawe
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Roanga o te Kaupapa
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Rerenga Mahi
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Kaitautoko
Tūhuratia i Tua Atu o Designers.org
Kimihia ngā hua, ngā ratonga me ngā āheinga mai i ā mātou hoa whakatairanga.
Ētahi Atu Hei Tūhura
Ngā Hoahoa e Hono Ana
Tūhuratia ētahi atu hoahoa whiwhi tohu mai i te kāwai kotahi, kua kōwhiria mā te kounga.
