Saltatur Meja dek Masoud Akbarzadeh adolah pamenang nan sangaik tahormat dari A' Design Award Perak 2020 nan sangaik prestigius dalam Kategori Kompetisi Desain Parabot.

PerakParabot· 2020

Saltatur Meja

dek Masoud Akbarzadeh

Klien: Polyhedral Structure Laboratory

Pamenang A' Design Award Perak dalam Kategori Parabot

34,089

Pamenang Pangharogaan Taverifikasi

Verifikasi Status Pangharogaan untuak #99680

Kunjungi Situs Caliak di A' Design Award Siaran Pers Lencana Penghargaan

Warno

Desain

Tantang Saltatur Meja

Saltatur adolah sabuah meja bantang panjang nan dirancang sabagai struktur komposit prafabrikasi. Meja ko manggabuangkan badan beton nan hanyo manangguang tekanan, batang baja post-tensioning, sarato tutuik kaco nan sangaik tipih. Tutuik kaco tu dibantuak sabagai lengkung funikular tigo engsel nan mambantang sapanjang 3,75 meter. Bantuak struktur ko dikambangkan jo statika grafis tigo dimensi, sahinggo badan beton tetap tatahan dalam kondisi tekanan dek tali tarikan di bagian ateh jo bawah. Sistem spasial nan tapisah ko mangurangi volume beton sarato jejak karbon, samantaro tetap manjago maso nan dibutuahkan untuak kinerja struktural.

Pangakuan

Tantang A' Design Award Perak

Saltatur Meja adolah pamenang A' Design Award Perak, sabuah pangakuan nan luar biaso bapresti nan dibarikan ka rancangan tingkaik tatinggi, elok jo mangesankan. Pamenang Perak adolah karya nan sangaik cemerlang jo sangaik kreatif nan mamparlihatkan kapakaran, bakaik jo katajaman pikiran parancangnyo. Saltatur Meja dipaokan manjadi karya nan mangaguikan, contoh tauladan, sangaik profesional jo inovatif sacaro dalam. Rancangan nan manang Perak iko adolah panemuan nan nampak jo dikagumi nan mambari sumbangan untuak maluaskan batas seni, ilimu, rancangan jo teknologi. Saltatur Meja adolah ciptaan nan dicamburui banyak urang, nan mambangkikkan karinduan, mambaok parasaan positif jo malahiakan karagumon jo kakaguman.

Di Baliak Desain

Kit Pers

Kredit, anggota tim jo rincian teknis nan disadioan dek perancang.

Sifat Unik: The Saltatur demonstrates innovative research in the design and fabrication of a prefab, discrete, spatial composite structure consisting of a spatial, compression-only concrete body, post-tensioning steel rods, and an ultra-thin glass structure on its top in the form of long-span furniture. Using discrete spatial systems would minimize the volume of concrete and the carbon footprint while preserving the necessary mass for structural performance and specific architectural detailing.
Dimensi & Kemasan: 195 cm (W) x 308 cm (L) x 90 cm (H)
Tag: composite, ultra thin spatial concrete, design for reassembly, funicular structures
Teknologi Produksi: There are multiple design innovations in various phases of the realization of this project, from conceptual structural design to fabrication. The structural form of the project was developed using 3D/polyhedral graphic statics with a very particular control over the magnitude of the horizontal forces in the system. As a result, the entire concrete body of the structure is held in compression by the tension ties at the top and bottom of the structure with no horizontal reactions at the supports.
Tantangan Desain: Challenges include the concrete casting of complex 3d nodes, detail development that can allow for easy assembly and disassembly, ultra thin (4mm) glass top spanning 3 meters to support the applied loads and its self-weight.
Penelitian: The structural form of the furniture was designed using a newly developed method of 3D Graphic Statics, which is the extension of the existing 2D methods proposed in 1864. A node-based assembly was considered as a method of construction. An innovative detailing was developed that allowed fixing the members in their exact locations in the structure to avoid the possible spatial collision of the branches of the nodes during the assembly. The ultra-thin glass structure on the top was formed into a funicular geometry as a three-hinged discrete arch spanning 3.75 meters.
Inspirasi: The project has been inspired by the works of Gaudi and extends his works to a three-dimensional compression and tension combined system of forces in the form of a long span table. The structural form has been inspired by the Greco-Roman wrestling technique, Salto, which includes lifting, returning, and taking down an opponent to the mat. The geometry of the table lifts the glass top, rotates, and transfers the loads to the ground. The word 'salto' means 'to dance' in Latin. The name of our structure is Saltatur, which means 'a dancer' in Latin.
Durasi Proyek: 2 years, Weitzman School of Design, University of Pennsylvania
Alua Operasi: The Saltator is an ensemble of compression and tension forces held in a twisted configuration of equilibrium. The geometry of the structure was inspired by the Greco-Roman wrestling technique, Salto. The word 'salto' means 'to dance' in Latin, which also inspired the name of the furniture, Saltatur, 'a dancer' in Latin. The form was designed using the geometry-based method of 3D graphic statics. The structure shows how we can minimize the volume of construction materials and reduce the carbon footprint of a structure while preserving the necessary mass for structural performance.
Paten: N/A
Anggota Tim: Masoud Akbarzadeh, Ali Tabatabaei Ghomi, Mohammad Bolhassani, Mostafa Akbari, Alireza Seyedahmadian, Konstantinos Papalexiou, Jingchu Sun, Hanqing Yao.
Kredit Gambar: Copyright: Polyhedral Structures Laboratory
Image credit: Polyhedral Structures Laboratory