Reka bentuk Mira Kerusi oleh Cemil Yavuz ialah pemenang yang sangat dihormati bagi 2021 A' Design Award Besi yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Perabot.
BesiPerabot· 2021
Mira Kerusi
oleh Cemil Yavuz
Klien: Cemil Yavuz
Pemenang A' Design Award Besi dalam Kategori Perabot
Pemenang Anugerah Yang Disahkan
Sahkan Status Anugerah untuk #116467Reka Bentuk
Mengenai Mira Kerusi
Mira ialah sebuah kerusi yang direka untuk makan dan tempat duduk umum. Rangka kerusi ini diperbuat daripada tiga profil keluli tahan karat berbentuk bulat. Dua profil dibengkokkan pada sudut dan arah yang sama, manakala profil ketiga dibengkokkan dengan cara yang berbeza. Permukaan tempat duduk dan sandaran yang dilapisi fabrik dipasang pada rangka, dan kaki plastik yang boleh dilaraskan tingginya melengkapkan kerusi ini. Mira ringan dan boleh diletakkan di sekeliling meja atau berdiri sendiri. Kerusi ini boleh digunakan dengan condong ke kiri atau ke kanan. Mira dihantar dalam keadaan belum disatukan, membolehkan pengguna memasang kerusi ini sendiri selepas membuka bungkusan.
Pengiktirafan
Mengenai A' Design Award Besi
Mira Kerusi ialah pemenang A' Design Award Besi, pengiktirafan yang berprestij yang dianugerahkan kepada reka bentuk yang baik yang memenuhi keperluan profesional dan industri yang dijangka daripada ciptaan yang direka dengan baik. Pemenang Besi menunjukkan kemahiran yang besar, kepakaran yang tinggi, kefahaman pakar dan keupayaan kreatif penciptanya. Mira Kerusi diharapkan menjadi ciptaan yang sangat dihargai, dikagumi dan disayangi yang praktikal dan inovatif. Reka bentuk pemenang A' Design Award Besi ini menyepadukan amalan terbaik industri dan mempunyai ciri teknikal yang kompeten yang dikaitkan dengan kepakaran dan bakat. Mira Kerusi dihormati kerana ketelitiannya dan direka untuk memberikan peningkatan kualiti hidup yang membantu menjadikan dunia tempat yang lebih baik.
Di Sebalik Reka Bentuk
Kit Akhbar
Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.
- Ciri-Ciri Unik
- Mira is a chair made of three curved profiles basically. The chair's frame consists of a combination of three profiles. Two profiles bent in the same angle and direction and also one profile bents in a different way. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Dimensi & Pembungkusan
- Width 686 mm. x Depth 533 mm. x Height 690 mm.
As it is disassembled chair, it can be put in the carton box in smaller dimensions. - Tag
- Bending, Metal Profile, Chair, Simple, Elegant
- Teknologi Pengeluaran
- The chair's frame consists of a combination of three profiles. These are circle section stainless steel profiles. Two profiles bent in the same angle and direction, the other one bents in a different angle. Afterward, the main body is completed with the assembly of the fabric-covered seat and back surfaces. The product takes its final form by attaching height-adjustable plastic feet.
- Cabaran Reka Bentuk
- Iconic chairs designed in the historical process were examined during the design phase of the project. Based on the motto less is more, the product was aimed to have a plain appearance and also easy to produce. During the design phase, many different drawings were made for searching ideal form. While deciding on the form, it was being paid attention to angles that the machine could bend profiles during the production phase.
- Penyelidikan
- As the starting point of the project, it was determined as a simple, light-looking product design that would harm natural resources as little as possible. One of the aims of the project is that it will not require too many processes as a production technique. It is designed to be lightweight and disassembled considering the shipment of the product. Users can easily install the product by taking it out of the box. With the linear differences in the form, it is aimed to be remarkable in the place where it is located.
- Inspirasi
- In this design, it is aimed to reduce the extra labor force in production. The starting point of the design was to create the frame of the chair with only 2 different metal bending processes. At the same time, the product is intended to be lightweight and simple to assemble. It is not only a design that fulfills its functionality but also has a simple appearance visually.
- Tempoh Projek
- The chair can be used in both positions, leaning left or right. Consisting of metal profiles, the product is lightweight and can be positioned around the table or singular.
- Aliran Operasi
- Since the product is designed as disassembled, users can take the product out of the box and install it themselves. The chair can be used in both positions, leaning left or right. The chair made of metal profiles is light and can be positioned around the table or singular. With its simple appearance and non-standard lines, it will attract attention in the place.
Ditaja
Terokai Melangkaui Designers.org
Temui produk, perkhidmatan dan peluang daripada rakan pengiklanan kami.
Lagi untuk Diterokai
Reka Bentuk Berkaitan
Terokai lebih banyak reka bentuk pemenang anugerah daripada kategori yang sama, dipilih berdasarkan merit.
