Reka bentuk The Monomorph Kerusi oleh Wouter Van Riet Paap ialah pemenang yang sangat dihormati bagi 2025 A' Design Award Besi yang amat berprestij dalam Kategori Pertandingan Reka Bentuk Perabot.
BesiPerabot· 2025
The Monomorph Kerusi
oleh Wouter Van Riet Paap
Klien: De Ontwerpdivisie
Pemenang A' Design Award Besi dalam Kategori Perabot
Pemenang Anugerah Yang Disahkan
Sahkan Status Anugerah untuk #163541Reka Bentuk
Mengenai The Monomorph Kerusi
Monomorph ialah sebuah kerusi yang dibina dengan 39 elemen kayu yang serupa. Menggunakan hanya satu bentuk untuk mencipta kerusi menghasilkan produk modular yang sangat tahan lasak. Elemen berbentuk segitiga ini semuanya dipotong daripada satu kepingan papan lapis. Kesemua 39 elemen disambungkan dengan rod keluli untuk membentuk sandaran belakang, tempat duduk dan kaki. Kerusi ini boleh diangkut sebagai pakej rata dan mudah dipasang. Papan lapis dicat dalam warna yang telah dipilih atau boleh digunakan tanpa rawatan dalam edisi mentah.
Pengiktirafan
Mengenai A' Design Award Besi
The Monomorph Kerusi ialah pemenang A' Design Award Besi, pengiktirafan yang berprestij yang dianugerahkan kepada reka bentuk yang baik yang memenuhi keperluan profesional dan industri yang dijangka daripada ciptaan yang direka dengan baik. Pemenang Besi menunjukkan kemahiran yang besar, kepakaran yang tinggi, kefahaman pakar dan keupayaan kreatif penciptanya. The Monomorph Kerusi diharapkan menjadi ciptaan yang sangat dihargai, dikagumi dan disayangi yang praktikal dan inovatif. Reka bentuk pemenang A' Design Award Besi ini menyepadukan amalan terbaik industri dan mempunyai ciri teknikal yang kompeten yang dikaitkan dengan kepakaran dan bakat. The Monomorph Kerusi dihormati kerana ketelitiannya dan direka untuk memberikan peningkatan kualiti hidup yang membantu menjadikan dunia tempat yang lebih baik.
Di Sebalik Reka Bentuk
Kit Akhbar
Kredit, ahli pasukan dan butiran teknikal yang disediakan oleh pereka.
- Ciri-Ciri Unik
- The Monomorph is a chair that is constructed with 39 completely identical plywood elements. These elements are connected by steel rods. The plywood is painted in pre-selected colors but can also be used untreated in the RAW edition. The Monomorph is a relaxing fauteuil, intriguing from all angles.
- Dimensi & Pembungkusan
- The chair has a total depth of 810mm, a total width of 650mm and a total height of 850mm. Materials used are painted plywood, stainless steel tubes with rifling inside and cap screw on the outside.
- Tag
- chair, fauteuil, plywood,steel, comfortable, modular
- Teknologi Pengeluaran
- The 38 elements are CNC cut after various scale models were made. There has been substantial testing of various elements resulting in different chairs with different levels of comfort. eventually this single shape turned out to be the perfect single shape to create a chair with. There are several variants with 16 identical elements instead of 39, where the seat and backrest are formed with paper cord, used trucktarp or vegan leather.
- Cabaran Reka Bentuk
- The hardest part was to actually find the single shape with which to realize an actual chair that is both beautiful and comfortable. After the shape was found the challange was to make the chair stable. For this several models were build and eventually the real life prototype. First with 16 identical elements with vegan leather used for seat and backrest. Later even more pure, using only that one wooden shape.
- Penyelidikan
- As an architect I am always thinking about design and how to make it buildable. In construction the standardisation of elements, or even complete houses, has become more and more important. To keep costs acceptable, to minimize failure and maximize sustainability. But standardisation also limits the architects freedom to actually make a design. That is why I try to design these standardised elements myself in order to make the design leading and the standard elements following. The Monomorph is based on this principle of design lead standardisation. It is a chair constructed with 39 identical elements, which is a wooden triangle with rounded corners. A chair is formed by connecting these 39 elements with steel rods. The same element can be seat, backrest or leg. By adding more elements the chair can even be a sofa.
- Inspirasi
- In nature, an organism existing out of one shape is called a monomorph. The Monomorph chair is the result of my research to find this ideal single shape to create a chair with: One form to define the result. It makes building the chair efficient, creating less waste.
- Tempoh Projek
- The chair was designed in Januari 2024 in Utrecht, The Netherlands after several models were made. The first real size prototype was build in March 2024 after which extensive testing at the designers house took place. All in Utrecht, The Netherlands.
- Aliran Operasi
- The chair can be assembled by everyone who can handle a allen wrench.
- Paten
- Copyrights belong to Wouter van Riet Paap, 2024
Ditaja
Terokai Melangkaui Designers.org
Temui produk, perkhidmatan dan peluang daripada rakan pengiklanan kami.
Lagi untuk Diterokai
Reka Bentuk Berkaitan
Terokai lebih banyak reka bentuk pemenang anugerah daripada kategori yang sama, dipilih berdasarkan merit.
